--Basic Electricity - Servicemen (Online)
2016-07-05 - 2016-12-16 | Kaukauna Training Center, ,
Basic Electricity Servicemen – 10 Hours - Online

Day/Time: Opens August 22, 2016 and closes on Dec. 16, 2016.

Done on your own time at your own pace; you will receive an email ON or AFTER August 22 with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by Dec. 16, 2016.

Continuing Ed Credit/Hrs? No
A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.
This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

This class is done at your own pace, but must be completed prior to taking the Basic Burners and Boilers class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

---Basic Electricity-Test Out
2016-07-18 17:00 - 20:00 (America/Chicago) | Kaukauna Training Center, ,
Monday, July 18, 2016 at 5:00 pm at the Kaukauna Hall.
You must pass the test with a score of 90% or better. You may only take this test once.
Instructor: S. Wenger

Basic Boilers & Burners
2016-08-30 17:30 - 2016-11-01 20:30, 2017-09-12 17:30 - 2017-11-14 20:30 | Kaukauna Training Center, ,
Basic Burners and Boilers – 30 Hours

Prerequisite: Basic Electricity

Instructor: J. Valence

Day/Time: Tuesday from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is an introduction to the operation of boilers. The course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The Learning Units include:

Boiler Types and Design
Process Controls
Systems Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

DDC CONTROLS & VFD's
2016-08-31 17:30 - 2016-11-02 20:30 | Kaukauna Training Center, ,
DDC Controls and Variable Frequency Drives – 30 Hours

Instructor: J. Balza

Day/Time: Wednesday from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives for the HVAC market in various applications. The Learning Units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

4th Year Fabricator Review
2017-01-06 07:30 - 2017-04-07 11:00 | Kaukauna Training Center, ,
Fabricator Review – 30 Hours

Instructor: N. Schauland

Day/Time: Friday's from 7:30 am to 11:00 am

Dates: January 6 & 20, February 3 & 17, March 3, 17, 31 and April 7, 2017 (Shop portion will be review)

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

4th Year Fabricator Review
2017-01-06 11:30 - 2017-04-07 15:00 | Kaukauna Training Center, ,
Fabricator Review – 30 Hours

Instructor: N. Schauland

Day/Time: Friday's from 11:30 am to 3:00 pm

Dates: January 6 & 20, February 3 & 17, March 3, 17, 31 and April 7, 2017 (Shop portion will be review)

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

--Basic Electricity Servicemen (Online)
2017-01-09 - 2017-04-28 | Kaukauna Training Center, ,
Basic Electricity Servicemen – 10 Hours - Online

Day/Time: Opens January 9, 2017 and closes on April 28, 2017.

Done on your own time at your own pace; you will receive an email ON or AFTER January 9 with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by April 28, 2017.

Continuing Ed Credit/Hrs? No

This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

Practical Test PRACTICE Day
2017-04-15 07:30 - 15:30 | Kaukauna Training Center, ,
Date/Time: Saturday, April 15, 2017 at 7:30 am

This is a one-day class designed to PRACTICE for the practical exam.

Transit, Level & Laser
2017-04-20 17:30 - 2017-05-25 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser - 18 hours
Instructor: TBD

Day/Time: Thursday from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to expose the apprentice to the operation, function, and proper use of a transit-level. The Learning Units include:

Setting up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’.
Transferring bench mark levels requiring multiple transit setups
Plumbing over a point

This class takes place once a week for 3 weeks and one Saturday. This class is offered one time a year.

--Basic Electricity - Servicemen (Online)
2017-07-10 - 2017-12-15 | Kaukauna Training Center, ,
Basic Electricity Servicemen – 10 Hours - Online

Day/Time: Opens Monday, July 10 and closes on Dec. 15, 2017.

This class is done on your own time at your own pace. Once it opens and you enroll, you will receive an email with the link and your log in information. Watch your email for this information. The class must be completed by Dec. 15, 2017.

Continuing Ed Credit/Hrs? No
A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.
This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

This class is done at your own pace, but must be completed prior to taking the Basic Burners and Boilers class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

---Basic Electricity-Test Out
2017-07-17 17:00 - 20:00 | Kaukauna Training Center, ,
Monday, July 17, 2017 at 5:00 pm at the Kaukauna Hall.
You must pass the test with a score of 90% or better. You may only take this test once.
Instructor: S. Wenger

Metallurgy (FDL - Tues.)
2017-09-12 17:30 - 2017-11-14 20:30 | Fond du Lac Training Center, ,
Metallurgy – 30 Hours

Instructor: Nick Dahlinger

Day/Time: Tuesday starting September 12, 2017 from 5:30 to 8:30 pm for 10 classes

Fond du Lac Training Center

Continuing Ed Credit/Hrs? No

4th Yr. Fabricator Related (4th Yr. Review)
2018-01-05 12:00 - 2018-03-30 15:30 | Kaukauna Training Center, ,
4th Yr. Fabricator Related – 24.5 Hours

Instructor: N. Schauland

Day/Time: Friday starting January 5, 2018 from 12:00 pm to 3:30 pm for 7 weeks (every other Friday)

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through three of the Fabricator Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Materials Review
Science Review
Trigonometry and Pipe Math Review
Piping Isometric Drawing Review
Blueprint/Spool Drawing Review

This class takes place every other week opposite of the 2nd Semester of 4th Year Paid Related Instruction.

--Basic Electricity Servicemen (Online)
2018-01-08 - 2018-04-27 | Kaukauna Training Center, ,
Basic Electricity Servicemen – 10 Hours - Online

Day/Time: Opens January 8, 2018 and closes on April 27, 2018.

Done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by April 27, 2018.

Continuing Ed Credit/Hrs? No

This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

Pipe Trades Math for Fitters & Fabricators
2018-01-08 17:30 - 2018-02-19 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 21 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting January 8, 2018 from 5:30 pm to 8:30 pm for 7 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

4th Yr. Steamfitter Related
2018-01-09 17:30 - 2018-03-13 20:30 | Kaukauna Training Center, ,
4th Yr. Steamfitter Related – 30 Hours

Instructor: TBD

Day/Time: Tuesday starting January 9, 2018 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through four of the Steamfitter Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Math Review
Science Review
Refrigeration Review
Steam Review including Steam Tables
Hydronic Review

This class takes place once a week for 10 weeks and is offered once a year.

Pipe Joining Applications
2018-01-11 17:30 - 2018-03-15 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: D. Andersen

Day/Time: Thursday starting January 11, 2018 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Soldering and Brazing (Mon.)
2018-01-15 17:30 - 2018-03-12 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 30 Hours

Prerequisite: Pipe Trades Math

Instructor: R. Siehs

Day/Time: Monday starting January 15, 2018 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Pipe Trades Math for Fitters & Fabricators (Session 2)
2018-03-05 17:30 - 2018-04-16 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 21 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting March 5, 2018 from 5:30 pm to 8:30 pm for 7 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Basic Rigging for Field and Shop
2018-04-03 17:30 - 2018-06-05 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: D. Andersen

Day/Time: Tuesday starting April 3, 2018 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Pipe Joining Applications
2018-04-05 17:30 - 2018-06-07 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: D. Andersen

Day/Time: Thursday starting April 5 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Transit, Level & Laser
2018-04-19 17:30 - 2018-05-24 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser - 18 hours
Instructor: J. Everard

Day/Time: Thursday starting April 19, 2018 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to expose the apprentice to the operation, function, and proper use of a transit-level. The Learning Units include:

Setting up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’.
Transferring bench mark levels requiring multiple transit setups
Plumbing over a point

This class takes place once a week for 3 weeks and one Saturday. This class is offered one time a year.

1st Year Apprentice Orientation
2018-06-27 12:30 - 15:30 | Kaukauna Training Center, ,

1st yr. Apprentice Orientation
2018-06-27 17:00 - 20:00, 2018-07-25 12:30 - 15:30, 2018-07-25 17:00 - 20:00, 2018-08-08 12:30 - 15:30, 2018-08-08 17:00 - 20:00 | Kaukauna Training Center, ,

--Basic Electricity Servicemen (Online)
2018-07-09 - 2018-12-14 | Kaukauna Training Center, ,
Basic Electricity Servicemen – 10 Hours - Online

Day/Time: Opens July 9, 2018 and closes on December 14, 2018.

Done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by December 14, 2018.

Continuing Ed Credit/Hrs? No

This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

--Basic Math (Online)
2018-07-09 - 2018-12-14
Basic Math – 10 Hours - Online

Day/Time: Opens July 9, 2018 and closes on December 14, 2018.

Done on your own time at your own pace; you will receive an email ON or AFTER July 9, 2018 with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by December 14, 2018.

Continuing Educ. Hours? No

This course covers basic math. The Learning Units include:

Whole Numbers
Simple and Complex Fractions
Decimals
Percentages
Measurements
Exponents
Ratios
Proportions
Plane and Solid Figures

This class is done on your own pace, but must be completed prior to taking the Pipe Trades Math Class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

Pipe Trades Math for Fitters/Fab (Aft.)
2018-08-20 12:30 - 2018-10-22 15:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters/Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting August 20, 2018 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Soldering and Brazing (Mon.)
2018-08-20 17:30 - 2018-10-29 20:30 | Kaukauna Training Center, 2700 Northridge Dr, Kaukauna, WI, 54130, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: R. Siehs

Day/Time: Monday, August 20, 2018 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Pipe Trades Math for Fitters/Fabricators
2018-08-20 17:30 - 2018-10-22 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters/Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting August 20, 2018 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Basic Rigging for Field & Shop (Aft)
2018-08-21 12:30 - 2018-10-23 15:30 | Kaukauna Training Center, ,
Basic Rigging for Field & Shop – 30 Hours

Prerequisite: Pipe Trades Math

Day/Time: Tuesday starting August 21, 2018 from 12:30 pm - 3:30 pm for 10 weeks

Instructor: B. Rexses

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Metallurgy (Aft.)
2018-08-21 12:30 - 2018-10-23 15:30 | Kaukauna Training Center, ,
Metallurgy – 28 Hours

Instructor: TBD

Day/Time: Tuesday starting August 21, 2018 from 12:30 pm to 3:30 pm for 10 classes.

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Basic Boilers & Burners
2018-08-21 17:30 - 2018-11-06 20:30 | Kaukauna Training Center, ,
Basic Burners and Boilers – 36 Hours

Prerequisite: Basic Electricity

Instructor: J. Valence

Day/Time: Tuesday from 5:30 pm - 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is an introduction to the operation of boilers. The course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The Learning Units include:

Boiler Types and Design
Process Controls
Systems Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Basic Rigging for Field and Shop
2018-08-21 17:30 - 2018-10-23 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: J. Atkinson

Day/Time: Tuesday starting August 21, 2018 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

DDC CONTROLS & VFD's
2018-08-22 17:30 - 2018-10-24 20:30 | Kaukauna Training Center, ,
DDC Controls and Variable Frequency Drives – 30 Hours

Instructor: C. Nackers/A. Torbeck

Prerequisites: Basic Electricity--Servicemen

Day/Time: Wednesday starting August 22, 2018 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives for the HVAC market in various applications. The Learning Units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Metallurgy
2018-08-22 17:30 - 2018-10-24 20:30 | Kaukauna Training Center, ,
Metallurgy – 30 Hours

Instructor: S. Krejcarek

Day/Time: Wednesday starting August 22, 2018 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Plumbing Applications
2018-08-22 17:30 - 2018-10-10 20:30 | Kaukauna Training Center, ,
Plumbing Applications – 45 Hours

Instructor: B. Verstegen

Day/Time: Monday & Wednesday starting Wednesday, August 22, 2018 from 5:30 pm to 8:30 pm for 7.5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Pipe Joining Applications
2018-08-23 17:30 - 2018-10-25 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Thursday starting August 23, 2018 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Pipe Joining Applications (Aft.)
2018-08-27 12:30 - 2018-10-29 15:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: TBD

Day/Time: Monday starting August 27, 2018 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Soldering and Brazing (Tues.)
2018-08-28 17:30 - 2018-11-06 20:30 | Kaukauna Training Center, 2700 Northridge Dr, Kaukauna, WI, 54130, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: D. Brazzale

Day/Time: Tuesday August 28 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Basic Rigging for Field and Shop
2018-08-30 17:30 - 2018-11-01 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: F. Ujazdowski

Day/Time: Thursday starting August 30, 2018 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Pipe Trades Math for Plumbers
2018-09-04 - 2018-10-19 | Kaukauna Training Center, ,
Pipe Trades Math for Plumbers – 15 Hours

Prerequisites: Basic Math (online class)

Instructor: R. Lorge

Day/Time: Online and will open on Tuesday, September 4, 2018; you will have 6 weeks to complete the class as it will close on Friday, October 19, 2018.

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

UA Weld Test
2018-09-08 07:30 - 15:30, 2018-10-13 07:30 - 15:30, 2018-11-10 07:30 - 15:30, 2018-12-08 07:30 - 15:30, 2019-01-12 07:30 - 15:30, 2019-02-09 07:30 - 15:30, 2019-03-09 07:30 - 15:30, 2019-04-13 07:30 - 15:30 and 10 more dates | Kaukauna Training Center, ,
As always, there will need to be a minimum of six candidates to administer a weld test session.

If there is more participation than one session can accommodate, the local will administer as many sessions as necessary to serve its membership.

If interested in signing up, please contact Todd Nicholas.

First Aid/CPR/AED (Mon. Aft.)
2018-11-26 12:30 - 2018-12-17 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Monday starting November 26, 2018 from 12:30 pm to 3:30 pm

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED (M)
2018-11-26 17:30 - 2018-12-17 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: J. Larsen

Day/Time: Monday starting November 26, 2018 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Basic Refrigeration/CFC Certification
2018-11-27 17:30 - 2018-12-11 20:30 | Kaukauna Training Center, ,
Basic Refrigeration/CFC Certification – 15 Hours

Instructor: B. Pigeon

Day/Time: Tuesday and Thursday starting November 27, 2017 from 5:30 pm to 8:30 pm for 2.5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This course covers Basic Refrigeration and the CFC Certification. The Learning Units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat transfer
Temperature/Pressure Relationship
Safety
Refrigeration containment

This course will also prepare students to test for CFC Certification in Type I (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (which encompasses Type I, II, and III).

First Aid/CPR/AED (W)
2018-11-28 17:30 - 2018-12-19 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: J. Larsen

Day/Time: Wednesday starting November 28, 2018 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Service Pipe Math and Tube Bending
2018-11-28 17:30 - 2018-12-19 20:30 | Kaukauna Training Center, ,
Service Pipe Math and Tube Bending – 12 Hours

Prerequisite: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Wednesday starting November 28, 2018 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This course teaches the apprentice basic 45° Pipe Math and Tube Bending. The Learning Units include:

45° Pipe Math
45° Pipe Offsets
Tube Bending Layout
Tube Bending Math

Transition to Trainer
2018-11-28 17:30 - 2018-12-12 20:30 | Kaukauna Training Center, ,
Transition to Trainer – 9 Hours

Prerequisite: 4th or 5th year apprentice

Instructor: T. Martin

Day/Time: 3 Wednesday, nights - November 28, December 5 and December 12 from 5:30-8:30 pm

Note: This is a state requirement so you must attend all three nights to receive credit for the class!

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This one-day course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

First Aid/CPR/AED (Wed. Aft.)
2019-01-02 12:30 - 2019-01-23 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Wednesday starting January 2, 2019 from 12:30 pm to 3:30 pm

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Basic Liebert and I-Com Maintenance
2019-01-02 17:00 - 2019-01-23 21:00 | Kaukauna Training Center, ,
Basic Liebert And I-Com Maintenance – 12 Hours

Prerequisites: Basic Electricity

Instructor: J. Valence

Day/Time: Wednesday starting January 2, 2019 from 5:00 pm to 9:00 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Tube Bending
2019-01-02 17:30 - 2019-03-13 20:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: K. Schneider

Day/Time: Wednesday starting January 2, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

UA Heritage
2019-01-02 17:30 - 2019-03-27 20:30 | Kaukauna Training Center, ,
UA Heritage – 39 Hours

Instructor: D. Klumpp/K. Rademaker

Day/Time: Wednesday starting January 2, 2019 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

Welding (W)
2019-01-02 17:30 - 2019-03-06 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: C. Smith/A. Schoettler

Day/Time: Wednesday starting January 2, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Blueprint Reading - Steamfitters
2019-01-02 17:30 - 2019-03-06 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Steamfitter – 30 Hours

Instructor: D. Delsman

Day/Time: Wednesday starting January 2, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Welding (W) FDL
2019-01-02 17:30 - 2019-03-06 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: C. Schultz

Day/Time: Wednesday starting January 2, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Pipe Trades Math (Aft.) (SF Tech)
2019-01-03 12:30 - 2019-03-28 15:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math/Pipe Trades Math

Instructor: B. Meyerhofer

Day/Time: Thursday starting January 3, 2019 from 12:30 pm to 3:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Welding Aft. (Th)
2019-01-03 12:30 - 2019-03-07 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Lindahl/Various

Day/Time: Thursday starting January 3, 2019 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Welding (Th)
2019-01-03 17:30 - 2019-03-07 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: C. Smith/A. Schoettler

Day/Time: Thursday starting January 3, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Relay Logic and PLC's
2019-01-03 17:30 - 2019-03-21 20:30 | Kaukauna Training Center, ,
Relay Logic and Programmable Logic Controllers – 36 Hours

Prerequisite: Basic Electricity - Servicemen

Instructor: R. Gonzalez

Day/Time: Thursday starting January 3, 2019 from 5:30 pm to 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credits/Hrs? No

This course is designed to instruct the apprentice how to read and interpret basic electric ladder diagrams for troubleshooting electrical control systems, and understanding how to design multiple relays in a circuit to control systems or elements of HVAC equipment. PLC programming techniques and concepts will be explored in-depth with hands-on programming and individual PLC assembly and input/output wiring. PLC theory of operation and commonly used PLC functions are covered in detail. PLC programming will include digital inputs and outputs and analog inputs and outputs including 0-10VDC and 4 – 20 milliamp control, timers, and counters. Upon completion, the student will be able to program and perform basic troubleshooting on any major brand of PLC that uses PLC ladder logic.

The Learning Units include:

Basic Ladder Diagrams

4th Yr. Fabricator Related (4th Yr. Review) - "A" Week
2019-01-04 12:00 - 2019-04-12 15:30 | Kaukauna Training Center, ,
4th Yr. Fabricator Related – 28 Hours

Instructor: M. Stoop

Enroll in this class if your Day School is on B week.

Day/Time: Friday starting January 4, 2019 from 12:00 pm to 3:30 pm (every other Friday) for 8 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through three of the Fabricator Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Materials Review
Science Review
Trigonometry and Pipe Math Review
Piping Isometric Drawing Review
Blueprint/Spool Drawing Review

This class takes place every other week opposite of the 2nd Semester of 4th Year Paid Related Instruction.

Pipe Trades Math for Plumbers
2019-01-07 - 2019-02-22 | Kaukauna Training Center, ,
Pipe Trades Math for Plumbers – 15 Hours

Prerequisites: Basic Math (online class)

Instructor: R. Lorge

Day/Time: Online and will open on Monday, January 7, 2019; you will have 6 weeks to complete the class as it will close on Friday, February 22, 2019

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

--Use and Care of Tools/Local 400 Shop (Online)
2019-01-07 - 2019-04-26
Use and Care of Tools – 10 Hours - Online

This course is a prerequisite to ALL Day school/Shop activities and Welding classes.

Day/Time: Opens January 7, 2019 and closes on April 26, 2019.

This class is done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by April 26, 2019.

Continuing Ed. Credit/Hrs? No

This course aims to train apprentices in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. You can expect to learn about the following:

Proper Tool Use
Tool Care and Maintenance
Safety
Ladders and Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use and Care)

--Basic Electricity Servicemen (Online)
2019-01-07 - 2019-04-26 | Kaukauna Training Center, ,
Basic Electricity Servicemen – 10 Hours - Online

Day/Time: Opens January 7, 2019 and closes on April 26, 2019.

Done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by April 26, 2019.

Continuing Ed Credit/Hrs? No

This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

--Basic Math (Online)
2019-01-07 - 2019-04-26
Basic Math – 10 Hours - Online

Day/Time: Opens January 7, 2019 and closes on April 26, 2019.

Done on your own time at your own pace; you will receive an email ON or AFTER January 7, 2019 with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by April 26, 2019

Continuing Educ. Hours? No

This course covers basic math. The Learning Units include:

Whole Numbers
Simple and Complex Fractions
Decimals
Percentages
Measurements
Exponents
Ratios
Proportions
Plane and Solid Figures

This class is done on your own pace, but must be completed prior to taking the Pipe Trades Math Class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

Advanced Pipe Trades Math (SF Tech)
2019-01-07 17:30 - 2019-04-01 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math and Pipe Trades Math

Instructor: T. Martin

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Welding (M) FDL
2019-01-07 17:30 - 2019-03-11 20:30 | Fond du Lac Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Tabbert

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Soldering and Brazing (Mon.)
2019-01-07 17:30 - 2019-03-18 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: R. Siehs

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Mechanical Equipment Service 2
2019-01-07 17:30 - 2019-03-18 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service 2 – 33 Hours

Prerequisite: Mechanical Equipment Service 1

Instructor: Hagens/Valence/Torbeck

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Continuing Ed. Credits/Hrs? No

This course covers many aspects of the ever-changing Service Technician Field. The Learning Units include:

Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Blueprint Reading - Fabricators
2019-01-07 17:30 - 2019-03-11 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Fabricators – 30 Hours

Instructor: S. Krejcarek

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the basic knowledge needed to create and interpret process pipe drawings, and introduce the apprentice to pipe fittings, valves, and equipment. The Learning Units include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

This class takes place once a week for 10 weeks and is offered two times a year.

Pipe Trades Math for Fitters/Fab
2019-01-07 17:30 - 2019-03-11 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Welding (M)
2019-01-07 17:30 - 2019-03-11 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: D. Tremaine/J. Rothlesberger

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Pipe Trades Math (SF Tech)
2019-01-07 17:30 - 2019-04-01 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math/Pipe Trades Math

Instructor: N. Schauland

Day/Time: Monday starting January 7, 2019 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Basic Rigging for Field & Shop (Aft)
2019-01-08 12:30 - 2019-03-12 15:30 | Kaukauna Training Center, ,
Basic Rigging for Field & Shop – 30 Hours

Prerequisite: Pipe Trades Math

Day/Time: Tuesday starting January 8, 2019 from 12:30 pm - 3:30 pm for 10 weeks

Instructor: B. Rexses

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

First Aid/CPR/AED (T Night)
2019-01-08 17:30 - 2019-01-29 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: J. Larsen

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Basic Rigging for Field and Shop
2019-01-08 17:30 - 2019-03-12 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: F. Ujazdowski

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Isometric Drawing - Plumbers
2019-01-08 17:30 - 2019-02-26 20:30 | Kaukauna Training Center, ,
Isometric Drawing - Plumbers – 24 Hours

Prerequisite: Blueprint Reading for Plumbers

Instructor: J. Everard

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm to 8:30 pm for 8 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The Learning Units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Lay-outs
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to help lay-out Plumbing Installations

Soldering and Brazing (Tues.)
2019-01-08 17:30 - 2019-03-19 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: R. Siehs

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Welding (T)
2019-01-08 17:30 - 2019-03-12 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: J. Meyers/C. Sell

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Rigging with NCCCO Cert.
2019-01-08 17:30 - 2019-03-19 20:30 | Kaukauna Training Center, ,
Advanced Rigging with NCCCO Cert. – 33 Hours

NOTE: this is a prerequisite and the first 30 hours of the EPRI Rigging Certification class offered in the Spring.

Prerequisites: Basic Rigging

Instructor: B. Rexses

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to build upon the apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today's manufacturing and construction industries. The Learning Units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

4th Yr. Steamfitter Related
2019-01-08 17:30 - 2019-03-19 20:30 | Kaukauna Training Center, ,
4th Yr. Steamfitter Related – 33 Hours

Instructor: M. Darnick

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through four of the Steamfitter Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Math Review
Science Review
Refrigeration Review
Steam Review including Steam Tables
Hydronic Review

This class takes place once a week for 10 weeks and is offered once a year.

4th Yr. HVAC Service Related
2019-01-08 17:30 - 2019-03-19 20:30 | Kaukauna Training Center, ,
4th Yr.HVAC Service Related – 33 Hours

Instructor: S. Salentine

Day/Time: Tuesday starting January 8, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through four of the Steamfitter Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Math Review
Science Review
Refrigeration Review
Steam Review including Steam Tables
Hydronic Review

This class takes place once a week for 10 weeks and is offered once a year.

Advanced Pipe Trades Math (SF Tech)
2019-01-09 17:30 - 2019-04-03 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math/Pipe Trades Math

Instructor: N. Schauland

Day/Time: Wednesday starting January 9, 2019 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Construction Safety - OSHA 30
2019-01-10 17:30 - 2019-03-14 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: G. Guttenberg/B. Zamera

Day/Time: Thursday starting January 10, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Pipe Joining Applications
2019-01-10 17:30 - 2019-03-14 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Thursday starting January 3, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

4th Yr. Fabricator Related (4th Yr. Review) - "B" Week
2019-01-11 12:00 - 2019-04-05 15:30 | Kaukauna Training Center, ,
4th Yr. Fabricator Related – 28 Hours

Instructor: M. Stoop

Enroll in this class if your Day School is on "A" week.

Day/Time: Friday starting January 11, 2019 from 12:00 pm to 3:30 pm (every other Friday) for 8 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through three of the Fabricator Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Materials Review
Science Review
Trigonometry and Pipe Math Review
Piping Isometric Drawing Review
Blueprint/Spool Drawing Review

This class takes place every other week opposite of the 2nd Semester of 4th Year Paid Related Instruction.

Plumbing Service and Repair
2019-01-22 17:30 - 2019-04-30 20:30 | Kaukauna Training Center, ,
Plumbing Service and Repair – 45 Hours

Instructor: T. Sokoloski

Day/Time: Tuesday starting January 22, 2019 from 5:30 pm to 8:30 pm for 15 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

First Aid/CPR/AED (T Night/Session 2)
2019-02-12 17:30 - 2019-03-05 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: J. Larsen

Day/Time: Tuesday starting February 12, 2019 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Construction Safety - OSHA 30 (Aft.)
2019-03-21 12:30 - 2019-05-23 15:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Thursday starting March 21, 2019 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Welding (Aft. Mon. & Wed.)
2019-04-08 12:30 - 2019-05-08 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Lindahl/Various

Day/Time: Monday and Wednesday starting Monday, April 8, 2019 from 12:30 pm to 3:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Basic Rigging for Field and Shop
2019-04-09 17:30 - 2019-06-11 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: F. Ujazdowski

Day/Time: Tuesday starting April 9, 2019 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Welding (Mon. & Wed.)
2019-04-22 17:30 - 2019-05-22 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: D. Tremaine/J. Meyers

Day/Time: Monday and Wednesday starting Monday, April 22, 2019 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Service Solder, Braze and Welding
2019-04-23 17:30 - 2019-05-23 20:30 | Kaukauna Training Center, ,
Service Soldering, Brazing, and Welding – 30 Hours

Instructor: D. Schlimm/J. Meyers

Day/Time: Tuesday and Thursday starting April 23, 2019 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to set up the welding machine to simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: This class will not teach the apprentice how to weld pipe. The Learning Units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper operation of Torch and Welding Equipment

EPRI Rigging Certification
2019-04-23 17:30 - 2019-06-25 20:30 | Kaukauna Training Center, ,
EPRI Rigging Certification – 30 Hours

NOTE: Advanced Rigging is a prerequisite to this course as it is the first 30 hours of this 60 hour certification.

Instructor: B. Rexses/C. Saari

Day/Time: Tuesday starting April 23, 2019 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

Welding (Tues. & Thurs.)
2019-04-23 17:30 - 2019-05-23 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor:

Day/Time: Tuesday and Thursday starting Tuesday, April 23, 2019 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Pipe Joining Applications
2019-04-23 17:30 - 2019-05-23 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: TBD

Day/Time: Tuesday and Thursday starting April 23 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Basic Rigging for Field and Shop
2019-04-23 17:30 - 2019-05-23 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: B. Rexses

Day/Time: Tuesday & Thursday starting April 23, 2019 from 5:30 pm - 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

First Aid/CPR/AED (T Night)
2019-04-23 17:30 - 2019-05-14 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: J. Larsen

Day/Time: Tuesday starting April 23, 2019 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Transition to Trainer
2019-04-24 17:30 - 2019-05-08 20:30 | Kaukauna Training Center, ,
Transition to Trainer – 9 Hours

Prerequisite: 4th or 5th year apprentice

Instructor: T. Martin

Day/Time: 3 Wednesday nights - April 24, May 1 and May 8, 2019 from 5:30-8:30 pm

Note: This is a state requirement so you must attend all three nights to receive credit for the class!

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This one-day course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

Transit, Level & Laser
2019-04-25 17:30 - 2019-05-30 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser - 18 hours
Instructor: J. Everard

Day/Time: Thursday starting April 25, 2019 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to expose the apprentice to the operation, function, and proper use of a transit-level. The Learning Units include:

Setting up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’.
Transferring bench mark levels requiring multiple transit setups
Plumbing over a point

This class takes place once a week for 3 weeks and one Saturday. This class is offered one time a year.

Construction Safety - OSHA 30 - Online
2019-05-06 - 2020-06-30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours - ONLINE

Read carefully!! Each member that takes this online class will cost the Education Fund $99. You must complete the course within 60 days of requesting the class or you will be billed $99—the 60 days start the date you are emailed the Registration code. OSHA rules state you can only work on the online course 7.5 hours in a 24 hour period, so that means you cannot sit down in one weekend and get it done. ALSO, OSHA allows you 3 attempts to pass each section. If you fail a section 3 times, you will have to start the entire course over with a new code and you will be charged $99. When your schedule allows, email or call Ashley (ashley@ua400.org or 920-462-0408) to be sent the link and Registration code.

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Transition to Trainer
2019-05-10 07:30 - 15:30 | Kaukauna Training Center, ,
Transition to Trainer – 8 Hours

Prerequisite: 4th or 5th year apprentice

Instructor: T. Martin

Day/Time: Friday, May 10, 2019 from 7:30 am to 3:30 pm -- one day

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This one-day course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

First Aid/CPR/AED (T Night)
2019-05-14 17:30 - 2019-06-04 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: J. Larsen

Day/Time: Tuesday starting May 14, 2019 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Transition to Trainer
2019-05-31 07:30 - 15:30 | Kaukauna Training Center, ,
Transition to Trainer – 8 Hours

Prerequisite: 4th or 5th year apprentice

Instructor: T. Martin

Day/Time: Friday, May 31, 2019 from 7:30 am to 3:30 pm -- one day

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This one-day course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

--Union 101: The Future is You (Online)
2019-07-08 - 2019-11-20
Union 101: The Future is You -- Online

Day/Time: Opens July 30, 2019 and closes on November 3, 2019.

This class is a prerequisite to UA Local 400 Heritage.

Completed on your own time; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by November 3, 2019

Continuing Educ. Hours? No

--Use and Care of Tools/Local 400 Shop (Online)
2019-07-08 - 2019-12-13
Use and Care of Tools/Local 400 Shop – 10 Hours - Online

This course is a prerequisite to ALL Day school/Shop activities and Welding classes.

Day/Time: Opens July 8, 2019 and closes on December 13, 2019.

This class is done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by December 13, 2019.

Continuing Ed. Credit/Hrs? No

This course aims to train apprentices in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. You can expect to learn about the following:

Proper Tool Use
Tool Care and Maintenance
Safety
Ladders and Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use and Care)

--Basic Math (Online)
2019-07-08 - 2019-12-13
Basic Math – 10 Hours - Online

Day/Time: Opens July 8, 2019 and closes on December 13, 2019.

For New apprentices, this class MUST BE DONE before your first Day school class.

Completed on your own time at your own pace; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by December 13, 2019

Continuing Educ. Hours? No

This course covers basic math. The Learning Units include:

Whole Numbers
Simple and Complex Fractions
Decimals
Percentages
Measurements
Exponents
Ratios
Proportions
Plane and Solid Figures

This class is done on your own pace, but must be completed prior to taking the Pipe Trades Math Class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

Tube Bending Test Out
2019-08-06 17:30 - 19:30 | Kaukauna Training Center, ,
Tube Bending Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: K. Schneider

Test out will be held at the Kaukauna hall on Tuesday, August 6, 2019 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out.

Soldering and Brazing Test Out
2019-08-06 17:30 - 19:30 | Kaukauna Training Center, ,
Soldering and Brazing Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: D. Brazzale

Test out will be held at the Kaukauna hall on Tuesday, August 6, 2019 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out.

1st Year Apprentice Orientation
2019-08-08 12:30 - 15:30, 2019-08-08 17:00 - 20:00 | Kaukauna Training Center, ,
1st Year Apprentice Orientation:
Required for all new apprentices starting day school in the fall of 2019. Things covered will include:

prerequisite online classes
day school schedule
unpaid related classes--requirements and recommendations
work hours

Pipe Joining Applications Test Out
2019-08-08 17:30 - 19:30 | Kaukauna Training Center, ,
Pipe Joining Applications Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: DJ Kloida

Test out will be held at the Kaukauna hall on Thursday, August 8, 2019 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 30 hours for successfully testing out.

Pipe Trades Math for Fitters/Fabricators (Aft.)
2019-08-19 12:30 - 2019-10-21 15:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters/Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting August 19, 2019 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Pipe Trades Math for Fitters/Fabricators (FDL)
2019-08-19 17:30 - 2019-10-21 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Pipe Trades Math for Fitters/Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting August 19, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Welding (M - FDL)
2019-08-19 17:30 - 2019-10-28 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Tabbert

Day/Time: Monday starting August 19, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Medical Gas Certification
2019-08-19 17:30 - 2019-11-18 20:30 | Kaukauna Training Center, ,
Medical Gas Certification – 39 Hours

Prerequisite: 4 years of piping experience per NITC (if you are a 3rd yr. apprentice, you MUST turn to 4th year during the class in order to test)

Instructor: D. Huth/R. Krause

Day/Time: Monday starting, August 19, 2019 from 5:30 pm to 8:30 pm for 13 weeks with the test date to be determined.

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Plumbing Applications
2019-08-19 17:30 - 2019-10-09 20:30 | Kaukauna Training Center, ,
Plumbing Applications – 45 Hours

Instructor: B. Verstegen

Day/Time: Monday & Wednesday starting Monday, August 19, 2018 from 5:30 pm to 8:30 pm for 7.5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Advanced Pipe Trades Math (SF Tech)
2019-08-19 17:30 - 2019-11-18 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math/Pipe Trades Math

Instructor: N. Schauland

Day/Time: Monday starting August 19, 2019 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Welding (M)
2019-08-19 17:30 - 2019-10-28 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: D. Tremaine/J. Rothlesberger

Day/Time: Monday starting August 19, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

DDC CONTROLS & VFD's
2019-08-19 17:30 - 2019-10-28 20:30 | Kaukauna Training Center, ,
DDC Controls and Variable Frequency Drives – 30 Hours

Instructor: C. Nackers/A. Torbeck

Day/Time: Monday starting August 19, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives for the HVAC market in various applications. The Learning Units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

UA/MCA ForemanCertification
2019-08-19 17:30 - 2019-11-04 20:30 | Kaukauna Training Center, ,
UA/MCA Foreman Certification – 33 Hours

Instructor: D. Zeeman/T. Van Camp

Day/Time: Monday starting August 19, 2019 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

The objective of the United Association Foreman Certification Program is to provide highly qualified Foremen to fulfill the quality and workmanship requirements governing supervision activities. The Learning Units include:

The Standard for Excellence
Understanding the Full Cost of an Hour of Labor
Relationships, Leadership and Motivation
Image and Professionalism
Resolving Conflict and the Art of Negotiation
Discipline and Corrective Action
Documentation and Record-Keeping
Planning and Scheduling
Managing, Measuring, and Improving Productivity
Safety
Change Orders
Subcontractors and Suppliers
Project Close-Out
Putting the Standards of Excellence into Practice

Blueprint Reading - Fabricators
2019-08-19 17:30 - 2019-10-28 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Fabricators – 30 Hours

Instructor: S. Krejcarek

Day/Time: Monday starting August 19, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the basic knowledge needed to create and interpret process pipe drawings, and introduce the apprentice to pipe fittings, valves, and equipment. The Learning Units include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

This class takes place once a week for 10 weeks and is offered two times a year.

Soldering and Brazing (Aft.)
2019-08-20 12:30 - 2019-10-29 15:30 | Kaukauna Training Center, 2700 Northridge Dr, Kaukauna, WI, 54130, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: M. Stoop

Day/Time: Tuesday August 20, 2019 from 12:30 pm to 3:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Basic Rigging for Field and Shop (Aft)
2019-08-20 12:30 - 2019-10-22 15:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: B. Rexses

Day/Time: Tuesday starting August 20, 2019 from 12:30 pm - 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Welding (T)
2019-08-20 17:30 - 2019-10-22 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: J. Meyers/C. Sell

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Tube Bending
2019-08-20 17:30 - 2019-10-29 20:30 | Kaukauna Training Center, ,
Tube Bending – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: K. Schneider

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Advanced Rigging with NCCCO Cert.
2019-08-20 17:30 - 2019-11-05 20:30 | Kaukauna Training Center, ,
Advanced Rigging with NCCCO Cert. – 36 Hours

NOTE: this is a prerequisite and the first 30 hours of the EPRI Rigging Certification class offered in the Spring.

Prerequisites: Basic Rigging

Instructor: B. Rexses

Day/Time: Tuesday starting August 21, 2018 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to build upon the apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today's manufacturing and construction industries. The Learning Units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

Mechanical Equipment Service 1
2019-08-20 17:30 - 2019-11-05 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service 1 – 36 Hours

Instructors: B. Hagens/T. Grose

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm to 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers many aspects of the ever-changing Service Technician Field. Learning Units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls

Basic Boilers & Burners
2019-08-20 17:30 - 2019-11-05 20:30 | Kaukauna Training Center, ,
Basic Burners and Boilers – 36 Hours

Instructor: J. Valence

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm - 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is an introduction to the operation of boilers. The course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The Learning Units include:

Boiler Types and Design
Process Controls
Systems Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Pipe Trades Math for Fitters/Fabricators
2019-08-20 17:30 - 2019-10-22 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters/Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: R. Roebke

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Soldering and Brazing (FDL)
2019-08-20 17:30 - 2019-10-29 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: R. Siehs

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Fond du Lac Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Basic Rigging for Field and Shop (Tues.)
2019-08-20 17:30 - 2019-10-22 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: F. Ujazdowski

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Blueprint Reading - Plumbers
2019-08-20 17:30 - 2019-10-29 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Plumbers – 33 Hours

Instructor: J. Everard

Day/Time: Tuesday starting August 20, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan, and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Welding (W - Aft. - Fond du Lac)
2019-08-21 12:30 - 2019-10-23 15:30
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: F. Rogan

Day/Time: Wednesday starting August 21, 2019 from 12:30 pm to 3:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Welding (W - Aft. - Kaukauna)
2019-08-21 12:30 - 2019-10-23 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Lindahl/Various

Day/Time: Wednesday starting August 21, 2019 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Welding (W)
2019-08-21 17:30 - 2019-10-23 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: C. Smith/A. Schoettler

Day/Time: Wednesday starting August 21, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

UA Local 400 Heritage
2019-08-21 17:30 - 2019-11-13 20:30 | Kaukauna Training Center, ,
UA Heritage – 39 Hours

Prerequisite: Union 101: The Future is You (Online). This must be completed before the start of class.

Instructor: D. Klumpp

Day/Time: Wednesday starting August 21, 2019 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

Blueprint Reading - Steamfitters
2019-08-21 17:30 - 2019-10-23 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Steamfitter – 30 Hours

Instructor: F. Ujazdowski

Day/Time: Wednesday starting August 21, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Construction Safety - OSHA 30 (Aft.)
2019-08-22 12:30 - 2019-10-24 15:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Thursday starting August 22, 2019 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Metallurgy (Aft)
2019-08-22 12:30 - 2019-10-24 15:30 | Kaukauna Training Center, ,
Metallurgy – 30 Hours

Instructor: B. Meyerhofer

Day/Time: Thursday starting August 22, 2019 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Pipe Trades Math for Fitters/Fabricators (Th)
2019-08-22 17:30 - 2019-10-24 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters/Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Thursday starting August 22, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Welding (Th)
2019-08-22 17:30 - 2019-10-24 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Williquette/D. Saari

Day/Time: Thursday starting August 22, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Tube Bending
2019-08-22 17:30 - 2019-10-31 20:30 | Kaukauna Training Center, ,
Tube Bending – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: M. Darnick

Day/Time: Thursday starting August 22, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Metallurgy
2019-08-22 17:30 - 2019-10-24 20:30 | Kaukauna Training Center, ,
Metallurgy – 30 Hours

Instructor: S. Krejcarek

Day/Time: Thursday starting August 22, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Basic Rigging for Field and Shop (Thurs.)
2019-08-22 17:30 - 2019-10-24 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: J. Atkinson

Day/Time: Thursday starting August 22, 2019 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Advanced Pipe Trades Math (SF Tech)
2019-08-22 17:30 - 2019-11-14 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: T. Martin

Day/Time: Thursday starting August 22, 2019 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Pipe Joining Applications
2019-08-22 17:30 - 2019-10-24 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Thursday starting August 22, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

First Aid/CPR/AED
2019-08-22 17:30 - 2019-09-12 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting August 22, 2019 from 5:30 pm to 8:30 pm

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Soldering and Brazing
2019-08-27 17:30 - 2019-11-05 20:30 | Kaukauna Training Center, 2700 Northridge Dr, Kaukauna, WI, 54130, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: D. Brazzale

Day/Time: Tuesday August 27, 2019 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Transit, Level & Laser
2019-08-29 17:30 - 2019-10-03 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser - 18 hours
Instructor: J. Everard

Day/Time: Thursday starting August 29, 2019 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to expose the apprentice to the operation, function, and proper use of a transit-level. The Learning Units include:

Setting up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’.
Transferring bench mark levels requiring multiple transit setups
Plumbing over a point

This class takes place once a week for 3 weeks and one Saturday. This class is offered one time a year.

First Aid/CPR/AED (Aft.)
2019-09-04 12:30 - 2019-09-25 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Wednesday starting September 4, 2019 from 12:30 pm to 3:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Construction Safety - OSHA 30
2019-09-05 17:30 - 2019-11-07 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: G. Guttenberg/B. Zamera

Day/Time: Thursday starting September 5, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

First Aid/CPR/AED
2019-09-26 17:30 - 2019-10-17 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting September 26, 2019 from 5:30 pm to 8:30 pm

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED (FDL)
2019-10-22 17:30 - 2019-11-12 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting October 22, 2019 from 5:30 pm to 8:30 pm

Fond du Lac Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Basic Refrigeration/CFC Certification
2019-12-03 17:30 - 2019-12-17 20:30 | Kaukauna Training Center, ,
Basic Refrigeration/CFC Certification – 15 Hours

Instructor: B. Pigeon

Day/Time: Tuesday and Thursday starting December 3, 2019 from 5:30 pm to 8:30 pm for 2.5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This course covers Basic Refrigeration and the CFC Certification. The Learning Units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat transfer
Temperature/Pressure Relationship
Safety
Refrigeration containment

This course will also prepare students to test for CFC Certification in Type I (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (which encompasses Type I, II, and III).

Service Pipe Math and Tube Bending
2019-12-03 17:30 - 2019-12-17 20:30 | Kaukauna Training Center, ,
Service Pipe Math and Tube Bending – 12 Hours

Prerequisite: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Tuesday & Thursday starting Tuesday, December 3, 2019 from 5:30 pm to 8:30 pm for 2.5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This course teaches the apprentice basic 45° Pipe Math and Tube Bending. The Learning Units include:

45° Pipe Math
45° Pipe Offsets
Tube Bending Layout
Tube Bending Math

First Aid/CPR/AED (Tue. & Thurs.)
2019-12-03 17:30 - 2019-12-12 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Tuesday & Thursday starting Tuesday, December 3, 2019 from 5:30 pm to 8:30 pm for 2 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 6 hours

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Transition to Trainer
2019-12-05 17:30 - 2019-12-19 20:30 | Kaukauna Training Center, ,
Transition to Trainer – 9 Hours

Prerequisite: 4th or 5th year apprentice

Instructor: T. Martin

Day/Time: 3 Thursday nights - December 5, December 12 and December 19 from 5:30-8:30 pm

Note: This is a state requirement so you must attend all three nights to receive credit for the class!

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This one-day course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

Tube Bending Test Out
2019-12-17 17:30 - 19:30 | Kaukauna Training Center, ,
Tube Bending Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: K. Schneider

Test out will take place at the Kaukauna hall on Tuesday, December 17, 2019 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out.

Soldering and Brazing Test Out
2019-12-17 17:30 - 19:30 | Kaukauna Training Center, ,
Soldering and Brazing Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: D. Brazzale

Test out will be held at the Kaukauna hall on Tuesday, December 17, 2019 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out.

Pipe Joining Applications Test Out
2019-12-19 17:30 - 19:30 | Kaukauna Training Center, ,
Pipe Joining Applications Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: DJ Kloida

Test out will be held at the Kaukauna hall on Thursday, December 19 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 30 hours for successfully testing out.

--Basic Math (Online)
2020-01-06 - 2020-04-24
Basic Math – 15 Hours - Online

Day/Time: Opens January 6, 2020 and closes on April 24, 2020.

For New apprentices, this class MUST BE DONE before your first Day school class.

Completed on your own time at your own pace; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by April 24, 2020.

Continuing Educ. Hours? No

This course covers basic math. The Learning Units include:

Whole Numbers
Simple and Complex Fractions
Decimals
Percentages
Measurements
Exponents
Ratios
Proportions
Plane and Solid Figures

This class is done on your own pace, but must be completed prior to taking the Pipe Trades Math Class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

--Union 101: The Future is You (Online)
2020-01-06 - 2020-04-24
Union 101: The Future is You – 15 Hours - Online

Day/Time: Opens January 6, 2020 and closes on April 24, 2020.

This class is a prerequisite to UA Local 400 Heritage.

Completed on your own time; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by March 9, 2020

Continuing Educ. Hours? No

--Use and Care of Tools/Local 400 Shop (Online)
2020-01-06 - 2020-04-24
Use and Care of Tools/Local 400 Shop – 10 Hours - Online

This course is a prerequisite to ALL Day school/Shop activities and Welding classes.

Day/Time: Opens January 6, 2020 and closes on April 24, 2020.

This class is done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by April 24, 2020.

Continuing Ed. Credit/Hrs? No

This course aims to train apprentices in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. You can expect to learn about the following:

Proper Tool Use
Tool Care and Maintenance
Safety
Ladders and Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use and Care)

Tube Bending (Aft.)
2020-01-06 12:30 - 2020-03-09 15:30 | Kaukauna Training Center, ,
Tube Bending – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: B. Rexses

Day/Time: Monday starting January 6, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Basic Rigging for Field and Shop (Mon.)
2020-01-06 17:30 - 2020-03-09 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: B. Rexses

Day/Time: Monday starting January 6, 2020 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

UA/MCA ForemanCertification
2020-01-06 17:30 - 2020-03-16 20:30 | Kaukauna Training Center, ,
UA/MCA Foreman Certification – 33 Hours

Instructor: D. Zeeman/T. Van Camp

Day/Time: Monday starting January 6, 2020 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

The objective of the United Association Foreman Certification Program is to provide highly qualified Foremen to fulfill the quality and workmanship requirements governing supervision activities. The Learning Units include:

The Standard for Excellence
Understanding the Full Cost of an Hour of Labor
Relationships, Leadership and Motivation
Image and Professionalism
Resolving Conflict and the Art of Negotiation
Discipline and Corrective Action
Documentation and Record-Keeping
Planning and Scheduling
Managing, Measuring, and Improving Productivity
Safety
Change Orders
Subcontractors and Suppliers
Project Close-Out
Putting the Standards of Excellence into Practice

Construction Safety - OSHA 30 - FDL
2020-01-06 17:30 - 2020-03-09 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
OSHA-30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Monday starting January 6, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Welding (M - FDL)
2020-01-06 17:30 - 2020-03-09 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Tabbert

Day/Time: Monday starting January 6, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Mechanical Equipment Service 2
2020-01-06 17:30 - 2020-03-16 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service 2 – 33 Hours

Prerequisite: Mechanical Equipment Service 1

Instructor: Hagens/Valence/Torbeck

Day/Time: Monday starting January 6, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Continuing Ed. Credits/Hrs? No

This course covers many aspects of the ever-changing Service Technician Field. The Learning Units include:

Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Plumbing Service and Repair
2020-01-06 17:30 - 2020-04-13 20:30 | Kaukauna Training Center, ,
Plumbing Service and Repair – 45 Hours

Instructor: T. Sokoloski

Day/Time: Monday starting January 6, 2020 from 5:30 pm to 8:30 pm for 15 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Welding (M)
2020-01-06 17:30 - 2020-03-09 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: D. Tremaine/J. Rothlesberger

Day/Time: Monday starting January 6, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Medical Gas Certification
2020-01-06 17:30 - 2020-03-30 20:30 | Kaukauna Training Center, ,
Medical Gas Certification – 39 Hours

Prerequisite: 4 years of piping experience per NITC

Instructor: D. Huth/R. Krause

Day/Time: Monday starting, January 6, 2020 from 5:30 pm to 8:30 pm for 13 weeks with the test date to be determined.

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Soldering and Brazing (Mon.)
2020-01-06 17:30 - 2020-03-16 20:30 | Kaukauna Training Center, 2700 Northridge Dr, Kaukauna, WI, 54130, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: R. Siehs

Day/Time: starting Monday, January 6, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Advanced Pipe Trades Math (SF Tech)
2020-01-06 17:30 - 2020-03-30 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math/Pipe Trades Math

Instructor: N. Schauland

Day/Time: Monday starting January 6, 2020 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Blueprint Reading - Fabricators
2020-01-07 12:30 - 2020-03-10 15:30 | Kaukauna Training Center, ,
Blueprint Reading for Fabricators – 30 Hours

Instructor: N. Marshall

Day/Time: Tuesday starting January 7, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the basic knowledge needed to create and interpret process pipe drawings, and introduce the apprentice to pipe fittings, valves, and equipment. The Learning Units include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

This class takes place once a week for 10 weeks and is offered two times a year.

Soldering and Brazing (Aft.)
2020-01-07 12:30 - 2020-03-17 15:30 | Kaukauna Training Center, 2700 Northridge Dr, Kaukauna, WI, 54130, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: M. Stoop

Day/Time: starting Tuesday, January 7, 2020 from 12:30 pm to 3:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Basic Rigging for Field and Shop (Tues.)
2020-01-07 17:30 - 2020-03-10 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: F. Ujazdowski

Day/Time: Tuesday starting January 7, 2020 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Welding (T)
2020-01-07 17:30 - 2020-03-10 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: J. Meyers/C. Sell

Day/Time: Tuesday starting January 7, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Basic Rigging for Field and Shop (FDL)
2020-01-07 17:30 - 2020-03-10 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Basic Rigging for Field and Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: C. Peterson

Day/Time: Tuesday starting January 7, 2020 from 5:30 pm - 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Pipe Trades Math for Fitters/Fabricators
2020-01-07 17:30 - 2020-03-10 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters/Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: R. Roebke

Day/Time: Tuesday starting January 7, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Soldering and Brazing
2020-01-07 17:30 - 2020-03-17 20:30 | Kaukauna Training Center, 2700 Northridge Dr, Kaukauna, WI, 54130, United States
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: D. Brazzale

Day/Time: starting Tuesday, January 7, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

First Aid/CPR/AED (Aft)
2020-01-08 12:30 - 2020-01-29 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Wednesday starting January 8, 2020 from 12:30 pm to 3:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Welding (W - Aft. - Kaukauna)
2020-01-08 12:30 - 2020-03-11 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Lindahl/Various

Day/Time: Wednesday starting January 8, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Welding (W - FDL)
2020-01-08 17:30 - 2020-03-11 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: C. Schultz

Day/Time: Wednesday starting January 8, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

4th Yr. Steamfitter Related
2020-01-08 17:30 - 2020-03-18 20:30 | Kaukauna Training Center, ,
4th Yr. Steamfitter Related – 33 Hours

Instructor: R. Roebke

Day/Time: Wednesday starting January 8, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through four of the Steamfitter Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Math Review
Science Review
Refrigeration Review
Steam Review including Steam Tables
Hydronic Review

This class takes place once a week for 10 weeks and is offered once a year.

Blueprint Reading - Steamfitters
2020-01-08 17:30 - 2020-03-11 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Steamfitter – 30 Hours

Instructor: D. Delsman

Day/Time: Wednesday starting January 8, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Welding (W)
2020-01-08 17:30 - 2020-03-11 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: C. Smith/A. Schoettler

Day/Time: Wednesday starting January 8, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Pipe Trades Math (SF Tech)- Aft
2020-01-09 12:30 - 2020-04-02 15:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math/Pipe Trades Math

Instructor: B. Meyerhofer

Day/Time: Thursday starting January 9, 2020 from 12:30 pm to 3:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

First Aid/CPR/AED
2020-01-09 17:30 - 2020-01-30 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting January 9, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

4th Yr. Steamfitter Related
2020-01-09 17:30 - 2020-03-19 20:30 | Kaukauna Training Center, ,
4th Yr. Steamfitter Related – 33 Hours

Instructor: R. Roebke/Cole Markowski

Day/Time: Thursday starting January 9, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through four of the Steamfitter Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Math Review
Science Review
Refrigeration Review
Steam Review including Steam Tables
Hydronic Review

This class takes place once a week for 10 weeks and is offered once a year.

Relay Logic and PLC's
2020-01-09 17:30 - 2020-03-26 20:30 | Kaukauna Training Center, ,
Relay Logic and Programmable Logic Controllers – 36 Hours

Instructor: R. Gonzalez

Day/Time: Thursday starting January 9, 2020 from 5:30 pm to 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credits/Hrs? No

This course is designed to instruct the apprentice how to read and interpret basic electric ladder diagrams for troubleshooting electrical control systems, and understanding how to design multiple relays in a circuit to control systems or elements of HVAC equipment. PLC programming techniques and concepts will be explored in-depth with hands-on programming and individual PLC assembly and input/output wiring. PLC theory of operation and commonly used PLC functions are covered in detail. PLC programming will include digital inputs and outputs and analog inputs and outputs including 0-10VDC and 4 – 20 milliamp control, timers, and counters. Upon completion, the student will be able to program and perform basic troubleshooting on any major brand of PLC that uses PLC ladder logic.

The Learning Units include:

Basic Ladder Diagrams

Advanced Rigging with NCCCO Cert.
2020-01-09 17:30 - 2020-03-19 20:30 | Kaukauna Training Center, ,
Advanced Rigging with NCCCO Cert. – 33 Hours

NOTE: this is a prerequisite and the first 30 hours of the EPRI Rigging Certification class offered in the Spring.

Prerequisites: Basic Rigging

Instructor: B. Rexses

Day/Time: Thursday starting January 9, 2020 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to build upon the apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today's manufacturing and construction industries. The Learning Units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

Welding (Th)
2020-01-09 17:30 - 2020-03-12 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Williquette/D.Saari

Day/Time: Thursday starting January 9, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Pipe Trades Math (SF Tech)
2020-01-09 17:30 - 2020-04-02 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: T. Martin

Day/Time: Thursday starting January 9, 2020 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Liebert Service Repair and Maintenance
2020-01-14 17:00 - 2020-03-03 21:00 | Kaukauna Training Center, ,
Liebert Service, Repair and Maintenance – 18 Hours

Instructor: J. Valence

Day/Time: Tuesday starting January 14, 2020 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Isometric Drawing - Plumbers
2020-01-21 17:30 - 2020-03-10 20:30 | Kaukauna Training Center, ,
Isometric Drawing - Plumbers – 24 Hours

Prerequisite: Blueprint Reading for Plumbers

Instructor: J. Everard

Day/Time: Tuesday starting January 21, 2020 from 5:30 pm to 8:30 pm for 8 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The Learning Units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Lay-outs
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to help lay-out Plumbing Installations

Tube Bending
2020-01-21 17:30 - 2020-03-31 20:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: K. Schneider

Day/Time: Tuesday starting January 21, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Submerged Arc Welding Certification (UA 400)
2020-01-22 17:30 - 2020-02-26 20:30 | Kaukauna Training Center, ,
Submerged Arc Welding Certification – 18 Hours

Instructor: B. Schampers

Day/Time: Wednesday starting January 22, 2020 from 5:30 pm - 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to instruct welding personnel in arc welding safety and the submerged arc welding process (SAW). This course includes booth instruction, lecture and practice. Class size is limited to three students. The Learning Units include:

Arc Welding Safety of the SAW Process
The Fundamentals of the SAW Process
Wire and Flux Application, Polarity, and Troubleshooting of Weld Defects

Pipe Joining Applications (Aft.)
2020-01-23 12:30 - 2020-03-26 15:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Thursday starting January 23, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Pipe Joining Applications
2020-01-23 17:30 - 2020-03-26 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Thursday starting January 23, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Tube Bending (Thurs.)
2020-01-23 17:30 - 2020-03-26 20:30 | Kaukauna Training Center, ,
Tube Bending – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: M. Darnick

Day/Time: Thursday starting January 23, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Construction Safety - OSHA 30 - Kauk
2020-01-23 17:30 - 2020-03-26 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: G. Guttenberg/B. Zamera

Day/Time: Thursday starting January 23, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

UA Local 400 Heritage (Aft)
2020-01-29 12:30 - 2020-04-22 15:30 | Kaukauna Training Center, ,
UA Heritage – 39 Hours

Prerequisite: Union 101: The Future is You (Online). This must be completed before the start of class.

Instructor: B. Meyerhofer

Day/Time: Wednesday starting January 29, 2020 from 12:30 pm to 3:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

UA Local 400 Heritage
2020-01-29 17:30 - 2020-04-22 20:30 | Kaukauna Training Center, ,
UA Heritage – 39 Hours

Prerequisite: Union 101: The Future is You (online). This must be done before class starts.

Instructor: D. Klumpp/K. Rademaker

Day/Time: Wednesday starting January 29, 2020 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

First Aid/CPR/AED
2020-02-13 17:30 - 2020-03-05 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting February 13, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED (FDL)
2020-03-10 17:30 - 2020-03-31 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Tuesday starting March 10, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Orbital Welding Certification (UA 400)
2020-03-16 17:30 - 2020-03-30 20:30 | Kaukauna Training Center, ,
Orbital Welding Certification – 15 Hours

Instructor: K. Agamaite/D. Delsman

Day/Time: Monday and Wednesday starting March 16, 2020 from 5:30 pm - 8:30 pm for 2 1/2 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? Yes

This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with seventy-five percent of time spent on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The student must attain a UA GTAW Welding Certification prior to signing up for this class. The Learning Units include:

Safety and Basic Operation
Introduction to Tube Cutting and Tube Facing
System set-up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Backflow/Cross Connection Certification (EPRI)
2020-03-31 17:30 - 2020-05-12 20:30 | Kaukauna Training Center, ,
Backflow/Cross Connection Certification – 40 Hours

Instructor: R. Siehs/B. Elliott

Day/Time: Tuesday and Thursday starting March 31, 2020 from 5:30 pm - 8:30 pm for 6 1/2 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? Yes

Isometric Drawing - Plumbers
2020-04-01 17:30 - 2020-05-20 20:30 | Kaukauna Training Center, ,
Isometric Drawing - Plumbers – 24 Hours

Prerequisite: Blueprint Reading for Plumbers

Instructor: J. Everard

Date & Time: Tuesday starting April 1, 2020 from 5:30 pm to 8:30 pm for 8 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The Learning Units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Lay-outs
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to help lay-out Plumbing Installations

Welding (Aft. Mon. & Wed.)
2020-04-06 12:30 - 2020-05-06 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Lindahl/Various

Day/Time: Monday and Wednesday starting Monday, April 6, 2020 from 12:30 pm to 3:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Welding (Mon. & Wed.)
2020-04-06 17:30 - 2020-05-06 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: D. Tremaine/J. Meyers

Day/Time: Monday and Wednesday starting Monday, April 6, 2020 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Pipe Joining Applications
2020-04-07 17:30 - 2020-05-07 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Tuesday and Thursday starting Tuesday, April 7, 2020 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Service Solder, Braze and Welding
2020-04-07 17:30 - 2020-05-07 20:30 | Kaukauna Training Center, ,
Service Soldering, Brazing, and Welding – 30 Hours

Instructor: D. Schlimm/J. Meyers

Day/Time: Tuesday and Thursday starting April 7, 2020 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to set up the welding machine to simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: This class will not teach the apprentice how to weld pipe. The Learning Units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper operation of Torch and Welding Equipment

EPRI Rigging Certification
2020-04-07 17:30 - 2020-06-09 20:30 | Kaukauna Training Center, ,
EPRI Rigging Certification – 30 Hours

NOTE: Advanced Rigging is a prerequisite to this course as it is the first 30 hours of this 60 hour certification.

Instructor: B. Rexses/C. Saari

Day/Time: Tuesday starting April 7, 2020 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

First Aid/CPR/AED
2020-04-07 17:30 - 2020-04-28 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Tuesday starting April 7, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Advanced Pipe Trades Math
2020-04-13 17:30 - 2020-05-28 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math – 39 Hours

Prerequisite: Basic Math/Pipe Trades Math

Instructor: N. Schauland

Day/Time: Monday and Thursday starting April 13, 2020 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Transit, Level & Laser
2020-04-23 17:30 - 2020-05-28 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser - 18 hours
Instructor: J. Everard

Day/Time: Thursday starting April 23, 2020 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to expose the apprentice to the operation, function, and proper use of a transit-level. The Learning Units include:

Setting up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’.
Transferring bench mark levels requiring multiple transit setups
Plumbing over a point

This class takes place once a week for 3 weeks and one Saturday. This class is offered one time a year.

Transition to Trainer
2020-05-07 17:30 - 2020-05-21 20:30 | Kaukauna Training Center, ,
Transition to Trainer – 9 Hours

Prerequisite: 4th or 5th year apprentice

Instructor: T. Martin

Day/Time: Thursday starting May 7, 2020 from 5:30-8:30 pm for 3 weeks

Note: This is a state requirement so you must attend all three nights to receive credit for the class!

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This one-day course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

Transition to Trainer (All day Friday)
2020-05-08 07:30 - 15:30 | Kaukauna Training Center, ,
Transition to Trainer – 8 Hours

Prerequisite: 4th or 5th year apprentice

Instructor: T. Martin

Day/Time: Friday, May 8, 2020 from 7:30 am to 3:30 pm for 1 day.

Note: This is a state requirement so you must attend all three dates to receive credit for the class!

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This one-day course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

First Aid/CPR/AED
2020-05-12 17:30 - 2020-06-02 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Tuesday starting May 12, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

--Union 101: UA & Labor History (Online)
2020-06-01 - 2020-08-16
Union 101: UA & Labor History – 15 Hours - Online

Day/Time: Opens June 1, 2020 and closes on August 16, 2020.

This class is a prerequisite to UA Local 400 Heritage.

Completed on your own time; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by August 16, 2020

Continuing Educ. Hours? No

--Use and Care of Tools/Local 400 Shop (Online)
2020-06-01 - 2020-08-16
Use and Care of Tools/Local 400 Shop – 10 Hours - Online

This course is a prerequisite to ALL Day school/Shop activities and Welding classes.

Day/Time: Opens June 1, 2020 and closes on August 16, 2020.

This class is done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by August 16, 2020.

Continuing Ed. Credit/Hrs? No

This course aims to train apprentices in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. You can expect to learn about the following:

Proper Tool Use
Tool Care and Maintenance
Safety
Ladders and Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use and Care)

--Basic Math (Online)
2020-06-01 - 2020-08-16
Basic Math – 15 Hours - Online

Day/Time: Opens June 1, 2020 and closes on August 16, 2020.

For New apprentices, this class MUST BE DONE before your first Day school class.

Completed on your own time at your own pace; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by August 16, 2020.

Continuing Educ. Hours? No

This course covers basic math. The Learning Units include:

Whole Numbers
Simple and Complex Fractions
Decimals
Percentages
Measurements
Exponents
Ratios
Proportions
Plane and Solid Figures

This class is done on your own pace, but must be completed prior to taking the Pipe Trades Math Class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

Soldering and Brazing Test Out
2020-08-04 17:30 - 20:30 | Kaukauna Training Center, ,
Soldering and Brazing Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: D. Brazzale

Test out will be held at the Kaukauna hall on Tuesday, August 4, 2020 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out; you will only receive 3 hours.

Tube Bending Test Out
2020-08-05 17:30 - 20:30 | Kaukauna Training Center, ,
Tube Bending Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: M. Darnick

Test out will be held at the Kaukauna hall on Wednesday, August 5, 2020 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out; you will receive 3 hours.

Pipe Joining Applications Test Out
2020-08-06 17:30 - 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: Nick Reitzner

Test out will be held at the Kaukauna hall on Thursday, August 6, 2020 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 30 hours for successfully testing out; you will only receive 3 hours.

Tube Bending Test Out
2020-08-07 13:30 - 16:30 | Kaukauna Training Center, ,
Tube Bending Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: D. Julius

Test out will be held at the Kaukauna hall on Friday, August 7, 2020 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out; you will receive 3 hours.

Soldering and Brazing Test Out
2020-08-07 13:30 - 16:30 | Kaukauna Training Center, ,
Soldering and Brazing Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: D. Julius

Test out will be held at the Kaukauna hall on Friday, August 7, 2020 starting at 1:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out; you will only receive 3 hours.

Pipe Joining Applications Test Out
2020-08-07 13:30 - 16:30 | Kaukauna Training Center, ,
Pipe Joining Applications Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: Dan Julius

Test out will be held at the Kaukauna hall on Friday, August 7, 2020 starting at 1:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 30 hours for successfully testing out; you will only receive 3 hours.

Pipe Trades Math for Fitters & Fabricators
2020-08-24 12:30 - 2020-11-02 15:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday starting August 24, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Pipe Trades Math for Fitters & Fabricators
2020-08-24 17:30 - 2020-11-09 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: D. Julius & J. Olson

Day/Time: Monday starting August 24, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Blueprint Reading - Fabricators
2020-08-24 17:30 - 2020-11-02 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Fabricators – 30 Hours

Instructor: S. Krejcarek

Day/Time: Monday starting August 24, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the basic knowledge needed to create and interpret process pipe drawings, and introduce the apprentice to pipe fittings, valves, and equipment. The Learning Units include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

This class takes place once a week for 10 weeks and is offered two times a year.

Advanced Pipe Trades Math (SF Tech)
2020-08-24 17:30 - 2020-11-23 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: N. Schauland

Day/Time: Monday starting August 24, 2020 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Tube Bending
2020-08-24 17:30 - 2020-11-16 20:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: M. Darnick

Day/Time: Monday starting August 24, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

UA/MCA ForemanCertification
2020-08-24 17:30 - 2020-11-09 20:30 | Kaukauna Training Center, ,
UA/MCA Foreman Certification – 33 Hours

Instructor: D. Zeeman/T. Van Camp

Day/Time: Monday starting August 24, 2020 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

The objective of the United Association Foreman Certification Program is to provide highly qualified Foremen to fulfill the quality and workmanship requirements governing supervision activities. The Learning Units include:

The Standard for Excellence
Understanding the Full Cost of an Hour of Labor
Relationships, Leadership and Motivation
Image and Professionalism
Resolving Conflict and the Art of Negotiation
Discipline and Corrective Action
Documentation and Record-Keeping
Planning and Scheduling
Managing, Measuring, and Improving Productivity
Safety
Change Orders
Subcontractors and Suppliers
Project Close-Out
Putting the Standards of Excellence into Practice

Welding (M)
2020-08-24 17:30 - 2020-11-02 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Monday starting August 24, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Rigging with NCCCO Cert.
2020-08-24 17:30 - 2020-11-09 20:30 | Kaukauna Training Center, ,
Advanced Rigging with NCCCO Cert. – 33 Hours

NOTE: this is a prerequisite and the first 30 hours of the EPRI Rigging Certification class offered in the Spring.

Prerequisites: Basic Rigging

Instructor: B. Rexses

Day/Time: Monday starting August 24, 2020 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to build upon the apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today's manufacturing and construction industries. The Learning Units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

Welding (M)
2020-08-24 17:30 - 2020-11-02 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: T. Tabbert

Day/Time: Monday starting August 24, 2019 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Basic Rigging
2020-08-25 12:30 - 2020-10-27 15:30 | Kaukauna Training Center, ,
Basic Rigging – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: B. Rexses

Day/Time: Tuesday starting August 25, 2020 from 12:30 pm - 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Welding (T)
2020-08-25 17:30 - 2020-10-27 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Soldering and Brazing
2020-08-25 17:30 - 2020-11-03 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: D. Brazzale

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Pipe Trades Math for Fitters & Fabricators
2020-08-25 17:30 - 2020-10-27 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: R. Roebke

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Mechanical Equipment Service 1
2020-08-25 17:30 - 2020-11-10 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service 1 – 36 Hours

Instructors: B. Hagens/T. Grose

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers many aspects of the ever-changing Service Technician Field. Learning Units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls

Tube Bending
2020-08-25 17:30 - 2020-11-03 20:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: K. Schneider

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Advanced Rigging with NCCCO Cert.
2020-08-25 17:30 - 2020-11-03 20:30 | Kaukauna Training Center, ,
Advanced Rigging with NCCCO Cert. – 33 Hours

NOTE: this is a prerequisite and the first 30 hours of the EPRI Rigging Certification class offered in the Spring.

Prerequisites: Basic Rigging

Instructor: B. Rexses

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to build upon the apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today's manufacturing and construction industries. The Learning Units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

Blueprint Reading - Steamfitters
2020-08-25 17:30 - 2020-10-27 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Steamfitter – 30 Hours

Instructor: D. Julius

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Basic Boilers & Burners
2020-08-25 17:30 - 2020-11-10 20:30 | Kaukauna Training Center, ,
Basic Burners and Boilers – 36 Hours

Instructor: J. Valence

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm - 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is an introduction to the operation of boilers. The course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The Learning Units include:

Boiler Types and Design
Process Controls
Systems Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Basic Rigging
2020-08-25 17:30 - 2020-10-27 20:30 | Kaukauna Training Center, ,
Basic Rigging – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: C. Saari/D. Pugh

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

First Aid/CPR/AED
2020-08-25 17:30 - 2020-09-15 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Tuesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Welding (W)
2020-08-26 12:30 - 2020-10-28 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Wednesday starting August 26, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Submerged Arc Welding Certification (UA 400)
2020-08-26 17:00 - 2020-09-30 20:00 | Kaukauna Training Center, ,
Submerged Arc Welding Certification – 18 Hours

Instructor: B. Schampers

Day/Time: Wednesday starting August 26, 2020 from 5:30 pm - 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to instruct welding personnel in arc welding safety and the submerged arc welding process (SAW). This course includes booth instruction, lecture and practice. Class size is limited to three students. The Learning Units include:

Arc Welding Safety of the SAW Process
The Fundamentals of the SAW Process
Wire and Flux Application, Polarity, and Troubleshooting of Weld Defects

Virtual: UA Local 400 Heritage
2020-08-26 17:30 - 2020-11-18 20:30
UA Heritage – 39 Hours

Prerequisite: Union 101: UA & Labor History (online). This must be done before class starts.

Instructor: K. Rademaker

Day/Time: Wednesday starting August 26, 2020 from 5:30 pm to 8:30 pm for 13 weeks

Virtually joining the Kaukauna Training Center Class from your computer at home.

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

Welding (W)
2020-08-26 17:30 - 2020-10-28 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Wednesday starting August 26, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Welding (W)
2020-08-26 17:30 - 2020-10-28 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Wednesday starting August 26, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Blueprint Reading - Plumbers
2020-08-26 17:30 - 2020-11-04 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Plumbers – 33 Hours

Instructor: J. Everard

Day/Time: Wednesday starting August 26, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan, and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Medical Gas Certification
2020-08-26 17:30 - 2020-11-18 20:30 | Kaukauna Training Center, ,
Medical Gas Certification – 39 Hours

Prerequisite: 4 years of piping experience per NITC

Instructor: D. Huth/R. Krause

Day/Time: Wednesday starting, August 26, 2020 from 5:30 pm to 8:30 pm for 13 weeks with the test date to be determined.

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

First Aid/CPR/AED
2020-08-26 17:30 - 2020-09-16 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Wednesday starting August 25, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

UA Local 400 Heritage
2020-08-26 17:30 - 2020-11-18 20:30 | Kaukauna Training Center, ,
UA Heritage – 39 Hours

Prerequisite: Union 101: UA & Labor History (online). This must be done before class starts.

Instructor: D. Klumpp/K. Rademaker

Day/Time: Wednesday starting August 26, 2020 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

Construction Safety - OSHA 30
2020-08-27 12:30 - 2020-10-29 15:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Thursday starting August 27, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Metallurgy
2020-08-27 12:30 - 2020-10-29 15:30 | Kaukauna Training Center, ,
Metallurgy – 30 Hours

Instructor: B. Meyerhofer

Day/Time: Thursdays starting August 27, 2020 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Soldering and Brazing
2020-08-27 17:30 - 2020-11-05 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: C. Berendt

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Mechanical Equipment Service 1
2020-08-27 17:30 - 2020-11-12 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service 1 – 36 Hours

Instructors: B. Hagens/T. Grose

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers many aspects of the ever-changing Service Technician Field. Learning Units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls

Tube Bending
2020-08-27 17:30 - 2020-11-05 20:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: M. Darnick

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Advanced Pipe Trades Math (SF Tech)
2020-08-27 17:30 - 2020-11-19 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: N. Schauland

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Basic Boilers & Burners
2020-08-27 17:30 - 2020-11-12 20:30 | Kaukauna Training Center, ,
Basic Burners and Boilers – 36 Hours

Instructor: J. Valence

Day/Time: Thursday starting August 27, 2020 from 5:30 pm - 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is an introduction to the operation of boilers. The course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The Learning Units include:

Boiler Types and Design
Process Controls
Systems Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Blueprint Reading - Steamfitters
2020-08-27 17:30 - 2020-10-29 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Steamfitter – 30 Hours

Instructor: F. Ujazdowski

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Relay Logic and PLC's
2020-08-27 17:30 - 2020-11-12 20:30 | Kaukauna Training Center, ,
Relay Logic and Programmable Logic Controllers – 36 Hours

Instructor: S. Salentine & D. Mercier

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credits/Hrs? No

This course is designed to instruct the apprentice how to read and interpret basic electric ladder diagrams for troubleshooting electrical control systems, and understanding how to design multiple relays in a circuit to control systems or elements of HVAC equipment. PLC programming techniques and concepts will be explored in-depth with hands-on programming and individual PLC assembly and input/output wiring. PLC theory of operation and commonly used PLC functions are covered in detail. PLC programming will include digital inputs and outputs and analog inputs and outputs including 0-10VDC and 4 – 20 milliamp control, timers, and counters. Upon completion, the student will be able to program and perform basic troubleshooting on any major brand of PLC that uses PLC ladder logic.

The Learning Units include:

Basic Ladder Diagrams

Basic Rigging
2020-08-27 17:30 - 2020-10-29 20:30 | Kaukauna Training Center, ,
Basic Rigging – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: D. Pugh

Day/Time: Thursday starting August 27, 2020 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Metallurgy
2020-08-27 17:30 - 2020-10-29 20:30 | Kaukauna Training Center, ,
Metallurgy – 30 Hours

Instructor: S. Krejcarek

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Welding (Th)
2020-08-27 17:30 - 2020-10-29 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Thursday starting August 27, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Plumbing Applications
2020-08-31 17:30 - 2020-10-19 20:30 | Kaukauna Training Center, ,
Plumbing Applications – 45 Hours

Instructor: A. Koenigs/T. Adams

Day/Time: Monday & Wednesday starting Monday, August 31, 2020 from 5:30 pm to 8:30 pm for 7.5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Pipe Joining Applications
2020-09-01 17:30 - 2020-11-03 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: Nick Reitzner

Day/Time: Tuesday starting September 1, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Pipe Joining Applications
2020-09-03 17:30 - 2020-11-05 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: Nick Reitzner

Day/Time: Thursday starting September 3, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

New Member Orientation
2020-09-08 - 2020-11-29
New Member Orientation:
Required for all new members prior to taking courses through Local 400's Training Department. Things covered will include:

prerequisite online classes
day school schedule (for apprentices)
unpaid related classes--requirements and recommendations
work hours (for apprentices)

--Union 101: UA & Labor History (Online)
2020-09-08 - 2020-11-29
Union 101: UA & Labor History – 15 Hours - Online

Day/Time: Opens September 8, 2020 and closes on November 29, 2020.

This class is a prerequisite to UA Local 400 Heritage.

Completed on your own time; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by November 29, 2020

Continuing Educ. Hours? No

--Use and Care of Tools/Local 400 Shop (Online)
2020-09-08 - 2020-11-29
Use and Care of Tools/Local 400 Shop – 10 Hours - Online

This course is a prerequisite to ALL Day school/Shop activities and Welding classes.

Day/Time: Opens September 8, 2020 and closes on November 29, 2020.

This class is done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by November 29, 2020.

Continuing Ed. Credit/Hrs? No

This course aims to train apprentices in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. You can expect to learn about the following:

Proper Tool Use
Tool Care and Maintenance
Safety
Ladders and Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use and Care)

--Basic Math (Online)
2020-09-08 - 2020-11-29
Basic Math – 15 Hours - Online

Day/Time: Opens September 8, 2020 and closes on November 29, 2020.

For New apprentices, this class MUST BE DONE before your first Day school class.

Completed on your own time at your own pace; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by November 29, 2020.

Continuing Educ. Hours? No

This course covers basic math. The Learning Units include:

Whole Numbers
Simple and Complex Fractions
Decimals
Percentages
Measurements
Exponents
Ratios
Proportions
Plane and Solid Figures

This class is done on your own pace, but must be completed prior to taking the Pipe Trades Math Class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

Transition to Trainer (Online)
2020-09-08 - 2020-11-29, 2020-12-07 - 2021-02-28, 2021-03-08 - 2021-05-23
Transition to Trainer – 8 Hours

Prerequisite: 4th or 5th year apprentice

Online

Note: This is a state requirement.

Continuing Ed. Credit/Hrs? No

This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new journeyworker to a new set of basic tools, the new journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. [This class is for 4th and 5th year apprentices ONLY]. The Learning Units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

Construction Safety - OSHA 30
2020-09-10 17:30 - 2020-11-12 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: N. Berger

Day/Time: Thursday starting September 10, 2020 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Construction Safety - OSHA 30
2020-09-12 07:30 - 2020-09-26 15:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Saturday starting September 12, 2020 from 7:30 am to 4:000 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

First Aid/CPR/AED Recertification Only
2020-09-22 17:30 - 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Recertification Only – 3 Hours

Note: You must have a valid first aid/CPR card that is about to expire when signing up for this refresher class. If it’s expired, you will need to take the entire course again.

Instructor: M. Ott

Day/Time: Thursday, September 22, 2020 from 5:30 pm to 8:30 pm for 1 night

Kaukauna Training Center

Continuing Ed. Credit/Hrs? Yes, 3 hours

First Aid/CPR/AED
2020-09-29 17:30 - 2020-10-20 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Tuesdays starting September 29, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2020-09-30 17:30 - 2020-10-21 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Wednesdays starting September 30, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2020-10-01 17:30 - 2020-10-22 20:30 | Fond du Lac Training Ceter, 460 W 11th St , Fond du Lac , WI , 54935, United States
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting October 1, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Transit, Level & Laser
2020-10-01 17:30 - 2020-11-05 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser - 18 hours
Instructor: J. Everard

Day/Time: Thursday starting October 1, 2021 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to expose the apprentice to the operation, function, and proper use of a transit-level. The Learning Units include:

Setting up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’.
Transferring bench mark levels requiring multiple transit setups
Plumbing over a point

First Aid/CPR/AED
2020-10-07 12:30 - 2020-10-28 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Wednesday starting October 7, 2020 from 12:30 pm to 3:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2020-10-12 17:30 - 2020-11-02 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Mondays starting October 12, 2020 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2020-11-30 12:30 - 2020-12-14 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Monday starting November 30, 2020 from 12:30 pm to 3:30 pm for 3 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2020-11-30 17:30 - 2020-12-09 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Monday and Wednesday starting November 30, 2020 from 5:30 pm to 8:30 pm for 2 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Orbital Welding Certification (UA 400)
2020-11-30 17:30 - 2020-12-14 20:30 | Kaukauna Training Center, ,
Orbital Welding Certification – 15 Hours

Instructor: K. Agamaite

Day/Time: Monday and Wednesday starting November 30, 2020 from 5:30 pm - 8:30 pm for 2 1/2 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? Yes

This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with seventy-five percent of time spent on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The student must attain a UA GTAW Welding Certification prior to signing up for this class. The Learning Units include:

Safety and Basic Operation
Introduction to Tube Cutting and Tube Facing
System set-up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Service Pipe Math and Tube Bending
2020-11-30 17:30 - 2020-12-15 20:30 | Kaukauna Training Center, ,
Service Pipe Math and Tube Bending – 12 Hours

Prerequisite: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Monday and Tuesday starting November 30, 2020 from 5:30 pm to 8:30 pm for 3 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This course teaches the apprentice basic 45° Pipe Math and Tube Bending. The Learning Units include:

45° Pipe Math
45° Pipe Offsets
Tube Bending Layout
Tube Bending Math

Basic Refrigeration/CFC Certification
2020-12-01 17:30 - 2020-12-15 20:30 | Kaukauna Training Center, ,
Basic Refrigeration/CFC Certification – 15 Hours

Instructor: B. Pigeon

Day/Time: Tuesday and Thursday starting December 1, 2020 from 5:30 pm to 8:30 pm for 2.5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This course covers Basic Refrigeration and the CFC Certification. The Learning Units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat transfer
Temperature/Pressure Relationship
Safety
Refrigeration containment

This course will also prepare students to test for CFC Certification in Type I (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (which encompasses Type I, II, and III).

First Aid/CPR/AED
2020-12-01 17:30 - 2020-12-10 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Tuesday and Thursday starting December 1, 2020 from 5:30 pm to 8:30 pm for 2 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

--Use and Care of Tools/Local 400 Shop (Online)
2020-12-07 - 2021-02-28
Use and Care of Tools/Local 400 Shop – 10 Hours - Online

This course is a prerequisite to ALL Day school/Shop activities and Welding classes.

Day/Time: Opens December 7, 2020 and closes on February 28, 2021.

This class is done on your own time at your own pace; you will receive an email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by February 28, 2021.

Continuing Ed. Credit/Hrs? No

This course aims to train apprentices in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. You can expect to learn about the following:

Proper Tool Use
Tool Care and Maintenance
Safety
Ladders and Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use and Care)

--Union 101: UA & Labor History (Online)
2020-12-07 - 2021-02-28
Union 101: UA & Labor History – 15 Hours - Online

Day/Time: Opens December 7, 2020 and closes on February 28, 2021.

This class is a prerequisite to UA Local 400 Heritage.

Completed on your own time; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by February 28, 2021

Continuing Educ. Hours? No

--Basic Math (Online)
2020-12-07 - 2021-02-28
Basic Math – 15 Hours - Online

Day/Time: Opens December 7, 2020 and closes on February 28, 2021.

For New apprentices, this class MUST BE DONE before your first Day school class.

Completed on your own time at your own pace; you will receive a separate email with the link and your log in information once your enrollment is complete. Watch your email for this information. The class must be completed by February 28, 2021.

Continuing Educ. Hours? No

This course covers basic math. The Learning Units include:

Whole Numbers
Simple and Complex Fractions
Decimals
Percentages
Measurements
Exponents
Ratios
Proportions
Plane and Solid Figures

This class is done on your own pace, but must be completed prior to taking the Pipe Trades Math Class. We recommend that this class be taken prior to your first class of Day School. You are able to test out of this class by taking the pretest. If you achieve a score of 90% or better, you will not be required to take this class.

New Member Orientation (Online)
2020-12-07 - 2021-02-28, 2021-03-08 - 2021-05-23
New Member Orientation (Online):
Required for all new members prior to taking courses through Local 400's Training Department. Things covered will include:

prerequisite online classes
day school schedule (for apprentices)
unpaid related classes--requirements and recommendations
work hours (for apprentices)

Pipe Joining Applications Test Out
2020-12-14 17:30 - 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: Dan Julius

Test out will be held at the Kaukauna hall on Monday, December 14, 2020 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 30 hours for successfully testing out; you will only receive 3 hours.

Soldering and Brazing Test Out
2020-12-14 17:30 - 20:30 | Kaukauna Training Center, ,
Soldering and Brazing Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: Dan Julius

Test out will be held at the Kaukauna hall on Monday, December 14, 2020 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out; you will only receive 3 hours.

Tube Bending Test Out
2020-12-14 17:30 - 20:30 | Kaukauna Training Center, ,
Tube Bending Test Out:
Prerequisite: Pipe Trades Math for Fitter/Fabricators

Instructor: Dan Julius

Test out will be held at the Kaukauna hall on Monday, December 14, 2020 starting at 5:30 pm. If you successfully pass the test, you will not need to take the entire class. However, you will not receive 33 hours for successfully testing out; you will receive 3 hours.

Plumbing Service and Repair
2021-01-03 17:30 - 2021-04-05 20:30 | Kaukauna Training Center, ,
Plumbing Service and Repair – 45 Hours

Instructor: C. Boylan, N. Grams, and T. Grose

Day/Time: Monday starting January 3, 2020 from 5:30 pm to 8:30 pm for 15 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Tube Bending
2021-01-04 12:30 - 2021-03-15 15:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: B. Rexses

Day/Time: Monday starting January 5, 2021 from 12:30 pm to 3:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Welding (M)
2021-01-04 17:30 - 2021-03-08 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Monday starting January 4, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Rigging with NCCCO Cert.
2021-01-04 17:30 - 2021-03-15 20:30 | Kaukauna Training Center, ,
Advanced Rigging with NCCCO Cert. – 33 Hours

NOTE: this is a prerequisite and the first 30 hours of the EPRI Rigging Certification class offered in the Spring.

Prerequisites: Basic Rigging

Instructor: B. Rexses

Day/Time: Monday starting January 4, 2021 from 5:30 pm - 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to build upon the apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today's manufacturing and construction industries. The Learning Units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

Advanced Pipe Trades Math (SF Tech)
2021-01-04 17:30 - 2021-03-29 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: N. Schauland

Day/Time: Monday starting January 4, 2021 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Welding (M)
2021-01-04 17:30 - 2021-03-08 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Monday starting January 4, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Soldering and Brazing
2021-01-04 17:30 - 2021-03-16 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: R. Siehs

Day/Time: Monday starting January 4, 2021 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Pipe Trades Math for Fitters & Fabricators
2021-01-04 17:30 - 2021-03-08 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: D. Julius

Day/Time: Monday starting January 4, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Center

Continuing Ed Credit/Hrs? No

A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

DDC CONTROLS & VFD's
2021-01-04 17:30 - 2021-03-08 20:30 | Kaukauna Training Center, ,
DDC Controls and Variable Frequency Drives – 30 Hours

Instructor: C. Nackers/A. Torbeck

Day/Time: Monday starting January 4, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives for the HVAC market in various applications. The Learning Units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Blueprint Reading - Fabricators
2021-01-04 17:30 - 2021-03-08 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Fabricators – 30 Hours

Instructor: S. Krejcarek

Day/Time: Monday starting January 4, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the basic knowledge needed to create and interpret process pipe drawings, and introduce the apprentice to pipe fittings, valves, and equipment. The Learning Units include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

This class takes place once a week for 10 weeks and is offered two times a year.

First Aid/CPR/AED
2021-01-04 17:30 - 2021-01-25 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Monday starting January 6, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Soldering and Brazing
2021-01-05 12:30 - 2021-03-16 15:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: N. Marhsall

Day/Time: Tuesday starting January 5, 2021 from 12:30 pm to 3:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Blueprint Reading - Fabricators
2021-01-05 12:30 - 2021-03-09 15:30 | Kaukauna Training Center, ,
Blueprint Reading for Fabricators – 30 Hours

Instructor: S. Krejcarek

Day/Time: Tuesday starting January 5, 2021 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the basic knowledge needed to create and interpret process pipe drawings, and introduce the apprentice to pipe fittings, valves, and equipment. The Learning Units include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

This class takes place once a week for 10 weeks and is offered two times a year.

Basic Rigging
2021-01-05 17:30 - 2021-03-09 20:30
Basic Rigging for Field – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: C. Peterson

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm - 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Soldering and Brazing
2021-01-05 17:30 - 2021-03-09 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: D. Brazzale

Day/Time: Tuesday starting January 5, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Pipe Trades Math for Fitters & Fabricators
2021-01-05 17:30 - 2021-03-09 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Fitters & Fabricators – 30 Hours

Prerequisites: Basic Math (online class)

Instructor: R. Roebke or J. Olson

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

A Test Out option is available for this class. A score of at least 90% must be attained in order to test out. You may only take the test once.

This course covers math as it relates to the Steamfitting Construction trade. The Learning Units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-Out of Jump Over Fitting Offsets
Lay-Out of a 90° Elbow on an Odd-Degree Fitting
Lay-Out of an Odd Degree Rolling Offset
Lay0Out of a Multi-Piece Fitting
Lay-Out of a 45° Lateral Fitting

Pipe Joining Applications
2021-01-05 17:30 - 2021-03-19 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: N. Reitzner

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Welding (T)
2021-01-05 17:30 - 2021-03-09 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Tube Bending
2021-01-05 17:30 - 2021-03-16 20:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: K. Schneider

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Basic Rigging
2021-01-05 17:30 - 2021-03-09 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field/Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: C. Saari

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Basic Rigging
2021-01-05 17:30 - 2021-03-09 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field/Shop – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: M. Cook

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Basic Boilers & Burners
2021-01-05 17:30 - 2021-03-23 20:30 | Kaukauna Training Center, ,
Basic Burners and Boilers – 36 Hours

Instructor: J. Valence

Day/Time: Tuesday starting January 5, 2021 from 5:30 pm - 8:30 pm for 12 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is an introduction to the operation of boilers. The course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The Learning Units include:

Boiler Types and Design
Process Controls
Systems Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Welding (W)
2021-01-06 12:30 - 2021-03-10 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Wednesday starting January 6, 2021 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

UA Local 400 Heritage
2021-01-06 12:30 - 2021-03-31 15:30 | Kaukauna Training Center, ,
UA Heritage – 39 Hours

Prerequisite: Union 101: The Future is You (online). This must be done before class starts.

Instructor: D. Klumpp/K. Rademaker

Day/Time: Wednesday starting January 6, 2021 from 12:30 pm to 3:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

Welding (W)
2021-01-06 17:30 - 2021-03-10 20:30
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Wednesday starting January 6, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Welding (W)
2021-01-06 17:30 - 2021-03-10 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Wednesday starting January 6, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Virtual: UA Local 400 Heritage
2021-01-06 17:30 - 2021-03-31 20:30
Virtual: UA Heritage – 39 Hours

Prerequisite: Union 101: UA & Labor History (online). This must be done before class starts.

Instructor: K. Rademaker

Day/Time: Wednesday starting January 6, 2021 from 5:30 pm to 8:30 pm for 13 weeks

Virtually joining the Kaukauna Training Center Class from your computer at home.

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

First Aid/CPR/AED
2021-01-06 17:30 - 2021-01-27 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Wednesday starting January 6, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Construction Safety - OSHA 30
2021-01-06 17:30 - 2021-03-10 20:30
OSHA-30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Wednesday starting January 6, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

4th Yr. Steamfitter Related
2021-01-06 17:30 - 2021-03-17 20:30 | Kaukauna Training Center, ,
4th Yr. Steamfitter Related – 33 Hours

Instructor: A. Forrest

Day/Time: Wednesday starting January 6, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through four of the Steamfitter Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Math Review
Science Review
Refrigeration Review
Steam Review including Steam Tables
Hydronic Review

This class takes place once a week for 10 weeks and is offered once a year.

UA Local 400 Heritage
2021-01-06 17:30 - 2021-03-31 20:30 | Kaukauna Training Center, ,
UA Heritage – 39 Hours

Prerequisite: Union 101: The Future is You (online). This must be done before class starts.

Instructor: D. Klumpp/K. Rademaker

Day/Time: Wednesday starting January 6, 2021 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. The Learning Units include:

UA Standard of Excellence
UA Constitution
UA 400 By-laws
UA 400 Collective Bargaining Agreement
UA 400 Health and Welfare Fund
UA 400 Pension Funds
The cost of an hour of Labor – 2nd Year
Personal Finance and Fiscal Responsibility

This class takes place once a week for 10 weeks and is offered two times a year.

Isometric Drawing - Plumbers
2021-01-06 17:30 - 2021-02-24 20:30 | Kaukauna Training Center, ,
Isometric Drawing - Plumbers – 24 Hours

Prerequisite: Blueprint Reading for Plumbers

Instructor: J. Everard

Date & Time: Wednesday starting January 6, 2021 from 5:30 pm to 8:30 pm for 8 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The Learning Units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Lay-outs
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to help lay-out Plumbing Installations

Medical Gas Certification
2021-01-06 17:30 - 2021-03-31 20:30 | Kaukauna Training Center, ,
Medical Gas Certification – 39 Hours

Prerequisite: 4 years of piping experience per NITC

Instructor: D. Huth/R. Krause

Day/Time: Wednesday starting, January 6, 2021 from 5:30 pm to 8:30 pm for 13 weeks with the test date to be determined.

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Advanced Pipe Trades Math (SF Tech)
2021-01-07 12:30 - 2021-04-01 15:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: B. Meyerhofer

Day/Time: Thursday starting January 7, 2021 from 12:30 pm to 3:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Pipe Joining Applications
2021-01-07 12:30 - 2021-03-11 15:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Thursday starting January 7, 2021 from 12:30 pm to 3:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Welding (Th)
2021-01-07 17:30 - 2021-03-11 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Metallurgy
2021-01-07 17:30 - 2021-03-11 20:30 | Kaukauna Training Center, ,
Metallurgy – 30 Hours

Instructor: S. Krejcarek

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

Advanced Pipe Trades Math (SF Tech)
2021-01-07 17:30 - 2021-04-01 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: N. Schauland

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Mechanical Equipment Service 2
2021-01-07 17:30 - 2021-03-18 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service 2 – 33 Hours

Prerequisite: Mechanical Equipment Service 1

Instructor: Hagens/Valence/Torbeck

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 11 weeks

Continuing Ed. Credits/Hrs? No

This course covers many aspects of the ever-changing Service Technician Field. The Learning Units include:

Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

First Aid/CPR/AED
2021-01-07 17:30 - 2021-01-28 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

4th Yr. Steamfitter Related
2021-01-07 17:30 - 2021-03-18 20:30 | Kaukauna Training Center, ,
4th Yr. Steamfitter Related – 33 Hours

Instructor: C. Markowski

Day/Time: Thursday starting January 7, 2020 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course reviews years one through four of the Steamfitter Apprenticeship as a preparation for the apprentice’s final written turn out testing. The Learning Units include:

Pipe Math Review
Science Review
Refrigeration Review
Steam Review including Steam Tables
Hydronic Review

This class takes place once a week for 10 weeks and is offered once a year.

Basic Rigging
2021-01-07 17:30 - 2021-03-11 20:30 | Kaukauna Training Center, ,
Basic Rigging for Field – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: S. Stauber

Day/Time: Thursday starting January 7, 2021 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to educate the apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The Learning Units include:

Rigging Knots and Hitches
Rigging Equipment and Hardware Safety
Execute Safe Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

This class takes place once a week for 10 weeks and is offered two times a year.

Pipe Joining Applications
2021-01-07 17:30 - 2021-03-11 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: DJ Kloida

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Blueprint Reading - Steamfitters
2021-01-07 17:30 - 2021-03-11 20:30 | Kaukauna Training Center, ,
Blueprint Reading for Steamfitter – 30 Hours

Instructor: F. Ujazdowski

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Blueprint Reading for Plumbers
2021-01-07 17:30 - 2021-03-18 20:30
Blueprint Reading for Plumbers – 33 Hours

Instructor: A. Koenigs

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 11 weeks

FDL Training Center

Continuing Ed Credit/Hrs? No

This course will focus on understanding the basics of plan interpretation. The main focus will be on the understanding basics of a plan, and elevation drawings. The Learning Units include:

Interpreting Different Types of Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying common problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling

Tube Bending
2021-01-07 17:30 - 2021-03-18 20:30 | Kaukauna Training Center, ,
Tube Bending – 33 Hours

Prerequisites: Pipe Trades Math

Instructor: M. Darnick

Day/Time: Thursday starting January 7, 2021 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course covers the various methods of Tube Bending with proper techniques and safety in mind. The Learning Units include:

Safety Concerns during the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to Any Bend and Lay Out of Bends
Tube Bending Lay Out
Common Mistakes made during the Tube Bending Process
Line-Up and Leveling of Tubing during the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Soldering and Brazing
2021-01-13 17:30 - 2021-03-24 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: C. Berendt

Day/Time: Wednesday starting January 13, 2021 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Soldering and Brazing
2021-01-14 17:30 - 2021-03-25 20:30 | Kaukauna Training Center, ,
Soldering and Brazing – 33 Hours

Prerequisite: Pipe Trades Math

Instructor: C. Berendt

Day/Time: Thursday starting January 14, 2021 from 5:30 pm to 8:30 pm for 11 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course covers procedures for cutting, soldering and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The Learning Units include:

Safety and Safe Work Practices
The Soldering and Brazing Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joint Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Construction Safety - OSHA 30
2021-01-21 17:30 - 2021-03-25 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: B. Zaremba & N. Berger

Day/Time: Thursday starting January 21, 2021 from 5:30 pm to 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Basic Valve Repair Certification (EPRI)
2021-02-01 17:00 - 2021-03-03 21:00 | Kaukauna Training Center, ,
Basic Valve Repair Certification (EPRI) – 40 Hours

Instructor: R. Wagner

Day/Time: Monday and Wednesday starting February 1, 2021 from 5:00 pm - 9:00 pm for 5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

The objective of the United Association Valve Technician Certification Program is to provide highly qualified Valve Technicians to fulfill the quality and workmanship requirements governing valve maintenance and repair activities. The Learning Units include:

Introduction to Valves
Error Free Maintenance
Valve information and Prints
Precision Measuring
Fasteners and Torqueing
Flanges
Valve Packing
Gate and Globe Valves
Diaphragm, Butterfly, Ball, and Plug Valves
Introduction to Control Valves
Safety, Relief and Check Valves

First Aid/CPR/AED
2021-02-08 17:30 - 2021-03-01 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Monday starting February 8, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2021-02-10 17:30 - 2021-03-03 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: B. Elliott

Day/Time: Wednesday starting February 10, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2021-02-11 17:30 - 2021-03-04 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Thursday starting February 11, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Union 101: UA & Labor History ONLINE
2021-03-08 - 2021-05-23
Union 101: UA & Labor History ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting March 8, 2021 to May 24, 2021

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Math ONLINE
2021-03-08 - 2021-05-23
Basic Math ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting March 8, 2021 to May 24, 2021

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use and Care of Tools/Local 400 Shop ONLINE
2021-03-08 - 2021-05-23
Use & Care of Tools/Local 400 Shop ONLINE

Pre-Requisite: New Member Orientation

Day/Time: Online, Self Paced, starting March 8, 2021 to May 23, 2021

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Advanced Valve Repair Certification (EPRI)
2021-03-08 17:00 - 2021-04-07 21:00 | Kaukauna Training Center, ,
Advanced Valve Repair Certification (EPRI) – 32 Hours

Instructor: R. Wagner

Day/Time: Monday and Wednesday starting March 8, 2021 from 5:00 pm - 9:00 pm for 5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

The objective of the United Association Valve Technician Certification Program is to provide highly qualified Valve Technicians to fulfill the quality and workmanship requirements governing valve maintenance and repair activities. The Learning Units include:

Introduction to Valves
Error Free Maintenance
Valve information and Prints
Precision Measuring
Fasteners and Torqueing
Flanges
Valve Packing
Gate and Globe Valves
Diaphragm, Butterfly, Ball, and Plug Valves
Introduction to Control Valves
Safety, Relief and Check Valves

First Aid/CPR/AED
2021-03-22 17:30 - 2021-04-12 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
First Aid/CPR/AED – 12 Hours

Instructor: C. Emmer

Day/Time: Monday starting March 22, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

First Aid/CPR/AED
2021-03-24 17:30 - 2021-04-14 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
First Aid/CPR/AED – 12 Hours

Instructor: C. Emmer

Day/Time: Wednesday starting March 24, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Fond du Lac Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Backflow/Cross Connection Certification (EPRI)
2021-03-30 17:30 - 2021-05-11 20:30 | Kaukauna Training Center, ,
Backflow/Cross Connection Certification – 40 Hours

Instructor: R. Siehs/B. Elliott

Day/Time: Tuesday and Thursday starting March 30, 2021 from 5:30 pm - 8:30 pm for 6 1/2 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? Yes

Welding (Mon. & Wed.)
2021-04-05 12:30 - 2021-05-05 15:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: Various

Day/Time: Monday and Wednesday starting Monday, April 5, 2021 from 12:30 pm to 3:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Advanced Pipe Trades Math (SF Tech)
2021-04-12 17:30 - 2021-07-19 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: N. Schauland

Day/Time: Monday starting April 12, 2021 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Advanced Pipe Trades Math (SF Tech)
2021-04-14 17:30 - 2021-07-07 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math - (formerly Steamfitter Technology) – 39 Hours

Prerequisite: Basic Math & Pipe Trades Math

Instructor: N. Schauland

Day/Time: Wednesday starting April 14, 2021 from 5:30 pm to 8:30 pm for 13 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

(4th year apprentices will get preference for this class.) This course is a review class for the apprentice’s upcoming Final Practical Testing. The Learning Units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45° Lateral Project
Mitered Fitting Project
Threaded Pipe Project
Tube Bending Project
Soldering and Brazing Project

Construction Safety - OSHA 30
2021-04-19 17:30 - 2021-05-19 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: P. Carlson

Day/Time: Monday and Wednesday starting April 19, 2021 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Welding (Mon. & Wed.)
2021-04-19 17:30 - 2021-05-19 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: D. Tremaine/J. Meyers

Day/Time: Monday and Wednesday starting Monday, April 19, 2021 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

Service Solder, Braze and Welding
2021-04-19 17:30 - 2021-05-18 20:30 | Kaukauna Training Center, ,
Service Soldering, Brazing, and Welding – 30 Hours

Instructor: D. Schlimm

Day/Time: Monday and Tuesday starting April 19, 2021 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to set up the welding machine to simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: This class will not teach the apprentice how to weld pipe. The Learning Units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper operation of Torch and Welding Equipment

Orbital Welding Certification (UA 400)
2021-04-19 17:30 - 2021-05-03 20:30 | Kaukauna Training Center, ,
Orbital Welding Certification – 15 Hours

Instructor: K. Agamaite

Day/Time: Monday and Wednesday starting April 19, 2021 from 5:30 pm - 8:30 pm for 2 1/2 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? Yes

This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with seventy-five percent of time spent on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The student must attain a UA GTAW Welding Certification prior to signing up for this class. The Learning Units include:

Safety and Basic Operation
Introduction to Tube Cutting and Tube Facing
System set-up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Pipe Joining Applications
2021-04-20 17:30 - 2021-05-20 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications – 30 Hours

Prerequisites: Pipe Trades Math

Instructor: Nick Reitzner

Day/Time: Tuesday and Thursday starting April 20, 2021 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? No

This course is designed to expose the apprentice to all types of Pipe Joining methods. The Learning Units include:

Safety
Carbon Threaded Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Welding (Tue. & Th.)
2021-04-20 17:30 - 2021-05-20 20:30 | Kaukauna Training Center, ,
Welding – 30 Hours

Prerequisite: Use and Care of Tools/Local 400 Shop

Instructor: D. Tremaine/J. Meyers

Day/Time: Tuesdays AND Thursdays starting Tuesday, April 20, 2021 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/30 hrs

This course teaches the apprentice pipe welding techniques used in such applications as welding high alloys materials and process piping. Learning will be at the apprentice’s own pace, but will be structured so the apprentice masters each process before moving on to the next process. This will take several classes to complete. The Learning Units include:

SMAW – Flat Plate
SMAW - Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW - Pipe
GTAW – Flat Plate
GTAW – Pipe

EPRI Rigging Certification
2021-04-20 17:30 - 2021-06-22 20:30 | Kaukauna Training Center, ,
EPRI Rigging Certification – 30 Hours

NOTE: Advanced Rigging is a prerequisite to this course as it is the first 30 hours of this 60 hour certification.

Instructor: B. Rexses/C. Saari

Day/Time: Tuesday starting April 20, 2021 from 5:30 pm - 8:30 pm for 10 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

Construction Safety - OSHA 30
2021-04-20 17:30 - 2021-05-20 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Tuesday and Thursday starting April 20, 2021 from 5:30 pm to 8:30 pm for 5 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

Service Pipe Math and Tube Bending
2021-04-20 17:30 - 2021-04-29 20:30 | Kaukauna Training Center, ,
Service Pipe Math and Tube Bending – 12 Hours

Prerequisite: Basic Math (online class)

Instructor: B. Rexses

Day/Time: Tuesday and Thursday starting November 30, 2020 from 5:30 pm to 8:30 pm for 2 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs? No

This course teaches the apprentice basic 45° Pipe Math and Tube Bending. The Learning Units include:

45° Pipe Math
45° Pipe Offsets
Tube Bending Layout
Tube Bending Math

First Aid/CPR/AED
2021-04-21 17:30 - 2021-05-12 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Wednesday starting April 21, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Transit, Level & Laser
2021-04-21 17:30 - 2021-05-26 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser - 18 hours
Instructor: J. Everard

Day/Time: Wednesday starting April 21, 2021 from 5:30 pm to 8:30 pm for 6 weeks

Kaukauna Training Center

Continuing Ed. Credit/Hrs.? No

This course is designed to expose the apprentice to the operation, function, and proper use of a transit-level. The Learning Units include:

Setting up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’.
Transferring bench mark levels requiring multiple transit setups
Plumbing over a point

Construction Safety - OSHA 30
2021-04-23 07:30 - 2021-05-14 15:30 | Kaukauna Training Center, ,
OSHA 30 Construction Safety – 30 Hours

Instructor: M. Ott

Day/Time: Friday starting April 23, 2021 from 7:30 am to 3:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes

This course covers OSHA – 30 Construction Safety. The Learning Units include:

Introduction to OSHA
Occupational Health Hazards
Fall Protection
Scaffolds, Ladders, and Stairways
Excavations
Fire Protection and Prevention
Confined Spaces
Electrical Lock-out-Tagout/NFPA 70E
Welding and Cutting
Forklifts and Aerial Lifts
Personal Protective Equipment
Cranes and Derricks
Hand and Power Tools

First Aid/CPR/AED
2021-05-19 17:30 - 2021-06-09 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Instructor: M. Ott

Day/Time: Wednesday starting May 19, 2021 from 5:30 pm to 8:30 pm for 4 weeks

Kaukauna Training Center

Continuing Ed Credit/Hrs? Yes/6 hrs

This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries and sudden illnesses, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The Learning Units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This class must also be taken during the apprentice’s first year.

Backflow/Cross Connection Certification (EPRI)
2021-05-25 17:30 - 2021-07-08 20:30 | Kaukauna Training Center, ,
Backflow/Cross Connection Certification (ASSE)

Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting May 25, 2021 from 5:30 p.m. to 8:30 p.m. for 6 ½ weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: R. Siehs, B. Elliott, C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed for plumbers and other related mechanical contractors. The course covers basic backflow hydraulics, cross-connection identification, degree of hazard, operation of backflow prevention assemblies, applications and basic installation requirements of backflow prevention assemblies. A hands-on workshop will allow students to practice test procedures on the reduced pressure principal assembly, double check valve assembly, and pressure vacuum breaker. ASSE certification in backflow prevention assembly testing, repairing, and surveying adds nationally recognized credentials to your resume, enhances your skills, and increases the number of tasks you can perform – ultimately raising your employability.

Use and Care of Tools/Local 400 Shop ONLINE
2021-06-01 - 2021-08-22
Use & Care of Tools/Local 400 Shop ONLINE

Pre-Requisite: New Member Orientation

Day/Time: Online, Self Paced, starting June 1, 2021 to August 22, 2021

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2021-06-01 - 2021-08-22
Transition to Trainer

Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting June 1, 2021 to August 22, 2021

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2021-06-01 - 2021-08-22
Union 101: UA & Labor History ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting June 1, 2021 to August 22, 2021

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation ONLINE
2021-06-01 - 2021-08-22
New Member Orientation ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting June 1, 2021 to August 22, 2021

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: New Member Orientation Binder

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Math ONLINE
2021-06-01 - 2021-08-22
Basic Math ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting June 1, 2021 to August 22, 2021

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Pipe Joining Applications
2021-06-01 17:30 - 2021-07-01 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays AND Thursdays from 5:30 p.m. to 8:30 p.m. starting June 1, 2021 for 5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: N. Reitzner

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Transit, Level & Laser
2021-06-02 17:30 - 2021-07-07 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser

Pre-Requisite: N/A

Day/Time: Wednesdays from 5:30 p.m. to 8:30 p.m. starting June 9, 2021 for 6 weeks

Location: Kaukauna Training Center, Certification Room

Instructor: J. Everard

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

OSHA 30 Certification (Construction Safety)
2021-06-04 07:30 - 2021-06-25 15:30 | Kaukauna Training Center, ,
OSHA 30 Construction Safety – 30 Hours

Pre-Requisite: N/A

Day/Time: FRIDAYS from 7:30 a.m. to 3:30 p.m. starting June 4, 2021 for 4 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

Plumbing Applications
2021-06-07 17:30 - 2021-07-28 20:30 | Kaukauna Training Center, ,
Plumbing Applications – 45 Hours

Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays from 5:30 p.m. to 8:30 p.m. starting June 7, 2021 for 7.5 weeks

Location: Kaukauna Training Center, Plumbing Room

Instructor: A. Koenigs, T. Adams & M. Tessmer

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

First Aid/CPR/AED (Tuesday)
2021-06-08 17:00 - 2021-06-23 21:00 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Pre-Requisite: N/A

Day/Time: TUESDAYS starting June 8, 2021 from 5:00 p.m. to 9:00 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Room

Instructor: M. Ott

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

OSHA 30 Certification (Construction Safety)
2021-06-08 17:30 - 2021-07-08 20:30 | Kaukauna Training Center, ,
OSHA-30 Construction Safety – 30 Hours

Pre-Requisite: N/A

Day/Time: TUESDAYS AND THURSDAYS from 5:30 p.m. to 8:30 p.m. starting June 8, 2021 for 5 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: N. Berger

Course Materials Needed:

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

Service Solder, Braze & Welding
2021-06-08 17:30 - 2021-07-07 20:30 | Kaukauna Training Center, ,
Service Solder, Braze & Welding

Pre-Requisite: Use & Care of Tools

Day/Time: Tuesdays AND Wednesdays starting June 8, 2021 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Room TBD

Instructor: I. Brace

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to setup the welding machine to make simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: this class will not teach the apprentice how to weld pipe. The learning units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper Operation of Torch and Welding Equipment

SUMMER Class Enrollment Deadline: Friday, May 21st

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, May 21st. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED (Thursday)
2021-06-10 17:00 - 2021-06-24 21:00 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Pre-Requisite: N/A

Day/Time: THURSDAYS starting June 10, 2021 from 5:00 p.m. to 9:00 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Room

Instructor: P. Carlson

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Tube Bending Test Out
2021-06-14 13:30 - 16:30 | Kaukauna Training Center, ,
Tube Bending TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday from 1:30 p.m. to 4:30 p.m. on June 14, 2021

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications Test Out
2021-06-14 13:30 - 16:30 | Kaukauna Training Center, ,
Pipe Joining Applications TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 1:30 p.m. to 4:30 p.m. on June 14, 2021

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering & Brazing Test Out
2021-06-14 13:30 - 16:30 | Kaukauna Training Center, ,
Soldering and Brazing TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 1:30 p.m. to 4:30 p.m. on June 14, 2021

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering & Brazing Test Out
2021-06-14 16:30 - 19:30 | Kaukauna Training Center, ,
Soldering and Brazing TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on June 14, 2021

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications Test Out
2021-06-14 16:30 - 19:30 | Kaukauna Training Center, ,
Pipe Joining Applications TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on June 14, 2021

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending Test Out
2021-06-14 16:30 - 19:30 | Kaukauna Training Center, ,
Tube Bending TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on June 14, 2021

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Building Trades WRITTEN Testing (Changing UA Card to Pipefitter)
2021-06-14 17:00 - 20:00 | Kaukauna Training Center, ,
Building Trades WRITTEN Testing – Changing your UA Card to Pipefitter

Pre-Requisite: Completion of a UA 400 Building Trades Apprenticeship and a minimum of one year as a Building Trades Journeyman.

Recommended Courses to be passed prior to testing:

Tube Bending
Advanced Rigging

Requirement waived if you have a current EPRI Rigging Certification

Soldering and Brazing

Requirement waived if you have a current UA 51 Welding Certification

Advanced Pipe Math

Must have been taken within 3 years of testing

Welding

Requirement waived if you have a current UA 60 and UA 21 Welding Certification

Day/Time: Monday, June 14, 2021 from 5:00 p.m. to 8:00 p.m.

Location: Kaukauna Training Center, Room TBD

Proctor: Steamfitting Examining Board

Testing Description: A written test must be passed prior to any practical testing. The written testing is based upon common pipefitting concepts and pipe math. Review material is available on the UA 400 Website.

Must be proficient in the following skills:

Stick and TIG Welding
Advanced Rigging
Soldering and Brazing
Tube Bending
Threading of Carbon Pipe
45° Laterals
Mitered Fittings

Building Trades PRACTICAL Testing (Changing UA Card to Pipefitter)
2021-06-18 07:30 - 15:30 | Kaukauna Training Center, ,
Building Trades PRACTICAL Testing – Changing your UA Card to Pipefitter

Pre-Requisite: Completion of a UA 400 Building Trades Apprenticeship and a minimum of one year as a Building Trades Journeyman.

Recommended Courses to be passed prior to testing:

Tube Bending
Advanced Rigging

Requirement waived if you have a current EPRI Rigging Certification

Soldering and Brazing

Requirement waived if you have a current UA 51 Welding Certification

Advanced Pipe Math

Must have been taken within 3 years of testing

Welding

Requirement waived if you have a current UA 60 and UA 21 Welding Certification

Day/Time: Friday, June 18, 2021 from 7:30 a.m. to 3:30 p.m.

Location: Kaukauna Training Center, Room TBD

Proctor: Steamfitting Examining Board

Testing Description: A written test must be passed prior to any practical testing. The written testing is based upon common pipefitting concepts and pipe math. Review material is available on the UA 400 Website.

Must be proficient in the following skills:

Stick and TIG Welding
Advanced Rigging
Soldering and Brazing
Tube Bending
Threading of Carbon Pipe
45° Laterals
Mitered Fittings

Instrumentation Level I Certification
2021-07-06 17:00 - 2021-07-31 21:00 | Kaukauna Training Center, ,
Instrumentation Level I Certification – 60 Hours

Pre-Requisite: N/A

Day/Time: Tuesdays, Thursdays from 5:00 p.m. to 9:00 p.m., AND Saturdays from 7:30 a.m. to 4:00 p.m. starting July 6, 2021 for 4 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: J. Drzewiecki and R. Wanta

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Course Description: The objective of the United Association Instrumentation Technician Certification Program is to provide highly qualified Instrumentation Technicians to fulfill the quality and workmanship requirements governing instrumentation maintenance and repair activities. The learning units include:

Basic Science and Fundamentals Related to Instrumentation and Control
Principles and Operations of Industrial Instrumentation
Definitions and Symbols
Flow Diagrams
Level and Pressure Controls
Flow and Temperature Measuring Instruments
Calibration of Transmitters, Transducers, Valve Positioners, and Controllers
The Four Domains of Instrumentation: Level, Flow, Pressure, and Temperature

First Aid/CPR/AED (Tuesday)
2021-07-06 17:00 - 2021-07-20 21:00 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Pre-Requisite: N/A

Day/Time: TUESDAYS starting July 6, 2021 from 5:00 p.m. to 9:00 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Room

Instructor: M. Ott

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED (Thursday)
2021-07-08 17:00 - 2021-07-22 21:00 | Kaukauna Training Center, ,
First Aid/CPR/AED – 12 Hours

Pre-Requisite: N/A

Day/Time: THURSDAYS starting July 8, 2021 from 5:00 p.m. to 9:00 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Room

Instructor: P. Carlson

Course Materials Needed:

Proper PPE

Steel-Toed Shoes/Boots
Long Pants

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

UA Local 400 Heritage
2021-08-18 17:30 - 2021-11-10 20:30 | Kaukauna Training Center, ,
UA Local 400 Heritage

Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 18, 2021 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Meeting Classroom

Instructor: K. Rademaker/J. Burhow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
New Member Binder

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Transition to Trainer ONLINE
2021-08-30 - 2021-11-28
Transition to Trainer

Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting August 30, 2021 to November 28, 2021

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use and Care of Tools/Local 400 Shop ONLINE
2021-08-30 - 2021-11-28
Use & Care of Tools/Local 400 Shop ONLINE

Pre-Requisite: New Member Orientation

Day/Time: Online, Self Paced, starting August 30, 2021 to November 28, 2021

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation ONLINE
2021-08-30 - 2021-11-28
New Member Orientation ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting August 30, 2021 to November 28, 2021

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: New Member Orientation Binder

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2021-08-30 - 2021-11-28
Union 101: UA & Labor History ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting August 30, 2021 to November 28, 2021

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Math ONLINE
2021-08-30 - 2021-11-28
Basic Math ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting August 30, 2021 to November 28, 2021

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Welding (Monday)
2021-08-30 17:30 - 2021-11-08 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting August 30, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

DDC Controls/VFD’s
2021-08-30 17:30 - 2021-11-22 20:30 | Kaukauna Training Center, ,
DDC Controls/VFD’s

Pre-Requisite: N/A

Day/Time: Mondays starting August 30, 2021 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Lab Classroom

Instructor: C. Nackers and A. Torbeck

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Soldering & Brazing (Monday)
2021-08-30 17:30 - 2021-11-15 20:30 | Kaukauna Training Center, ,
Soldering & Brazing

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 30, 2021 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Soldering & Brazing Lab

Instructor: M. Tessmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Plumbing Applications
2021-08-30 17:30 - 2021-10-20 20:30 | Kaukauna Training Center, ,
Plumbing Applications

Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting August 30, 2021 from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: A. Koenigs & T. Adams

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Pipe Trades Math (Monday)
2021-08-30 17:30 - 2021-11-22 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math

Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting August 30, 2021 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Trades Math (Steamfitters/Fabricators) (AFTERNOON)
2021-08-31 12:30 - 2021-11-02 15:30 | Kaukauna Training Center, ,
Pipe Trades Math for Steamfitters & Fabricators

Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 31, 2021 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: B. Rexses

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Joining Applications (Tuesday)
2021-08-31 17:30 - 2021-11-02 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 31, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: N. Reitzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Mechanical Equipment Service (MES) 1
2021-08-31 17:30 - 2021-11-16 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service (MES) 1

Pre-Requisite: N/A

Day/Time: Tuesdays starting August 31, 2021 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Lab Classroom

Instructor: B. Hagens and T. Grose

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Tube Bending (Tuesday)
2021-08-31 17:30 - 2021-11-09 20:30 | Kaukauna Training Center, ,
Tube Bending

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 31, 2021 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Rigging with Crane Signal Certification
2021-08-31 17:30 - 2021-11-09 20:30 | Kaukauna Training Center, ,
Advanced Rigging with Crane Signal Certification

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Tuesdays starting August 31, 2021 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: C. Saari

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Rigging with Crane Signal Certification
2021-08-31 17:30 - 2021-11-09 20:30 | Kaukauna Training Center, ,
Advanced Rigging with Crane Signal Certification

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Tuesdays starting August 31, 2021 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: B. Rexses/C. Saari

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Tuesday)
2021-08-31 17:30 - 2021-11-02 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting August 31, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Boilers & Burners
2021-08-31 17:30 - 2021-11-16 20:30 | Kaukauna Training Center, ,
Basic Boilers & Burners

Pre-Requisite: N/A

Day/Time: Tuesdays starting August 31, 2021 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: J. Valence

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Wednesday AFTERNOON)
2021-09-01 12:30 - 2021-11-03 15:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting September 1, 2021 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Blueprint Reading - Plumbers
2021-09-01 17:30 - 2021-11-10 20:30 | Kaukauna Training Center, ,
Blueprint Reading – Plumbers

Pre-Requisite: N/A

Day/Time: Wednesdays starting September 1, 2021 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Wednesday FDL)
2021-09-01 17:30 - 2021-11-03 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting September 1, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center, Weld Shop

Instructor: C. Schultz

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Soldering & Brazing (Wednesday)
2021-09-01 17:30 - 2021-11-10 20:30 | Kaukauna Training Center, ,
Soldering & Brazing

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting September 1, 2021 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Soldering & Brazing Lab

Instructor: C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Rigging for the Shop & Field
2021-09-01 17:30 - 2021-11-03 20:30 | Kaukauna Training Center, ,
Basic Rigging for the Shop and Field

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting September 1, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: P. Pugh

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to education the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Rigging for the Shop & Field
2021-09-01 17:30 - 2021-11-03 20:30 | Kaukauna Training Center, ,
Basic Rigging for the Shop and Field

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting September 1, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to education the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Wednesday)
2021-09-01 17:30 - 2021-11-03 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting September 1, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Blueprint Reading - Steamfitters (Thursday)
2021-09-02 17:30 - 2021-11-04 20:30 | Kaukauna Training Center, ,
Blueprint Reading – Steamfitters

Pre-Requisite: N/A

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Pipe Trades Math (Thursday)
2021-09-02 17:30 - 2021-12-02 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math

Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Thursday)
2021-09-02 17:30 - 2021-11-04 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Relay Logic & PLC
2021-09-02 17:30 - 2021-11-18 20:30 | Kaukauna Training Center, ,
Relay Logic & PLC

Pre-Requisite: N/A

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Lab Classroom

Instructor: A. Koenigs & T. Adams

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Metallurgy
2021-09-02 17:30 - 2021-11-04 20:30 | Kaukauna Training Center, ,
Metallurgy

Pre-Requisite: N/A

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: S. Krejcarek

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

OSHA 30 Certification (Construction Safety)
2021-09-02 17:30 - 2021-11-04 20:30 | Kaukauna Training Center, ,
OSHA 30 Certification (Construction Safety)

Pre-Requisite: N/A

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Classroom

Instructor: P. Carlson & B. Zaremba

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Joining Applications (Thursday)
2021-09-02 17:30 - 2021-11-04 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: N. Reitzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Tube Bending (Thursday)
2021-09-02 17:30 - 2021-11-11 20:30 | Kaukauna Training Center, ,
Tube Bending

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting September 2, 2021 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Monday)
2021-09-13 17:30 - 2021-10-04 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Mondays starting September 13, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Tuesday)
2021-09-14 17:30 - 2021-10-05 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Tuesdays starting September 14, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: M. Ott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Metallurgy (AFTERNOON)
2021-09-16 12:30 - 2021-11-18 15:30 | Kaukauna Training Center, ,
Metallurgy

Pre-Requisite: N/A

Day/Time: Thursdays starting September 16, 2021 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Blueprint Reading - Steamfitters (Tuesday)
2021-10-05 17:30 - 2021-12-21 20:30 | Kaukauna Training Center, ,
Blueprint Reading – Steamfitters

Pre-Requisite: N/A

Day/Time: Tuesdays starting October 5, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Best

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED RE-CERTIFICATION
2021-10-05 17:30 - 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Re-Certification

Pre-Requisite: N/A

Day/Time: Tuesday, October 5, 2021 from 5:30 p.m. to 8:30 p.m.

Location: Kaukauna Training Center, Safety Classroom

Instructor: M. Ott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course recertifies your First Aid/CPR/AED Certification. This course is required BEFORE your expiration date; if you have an expired First Aid/CPR/AED Certification, you are required to re-take the entire course again.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Monday AFTERNOON)
2021-10-11 12:30 - 2021-11-01 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Mondays starting October 11, 2021 from 12:30 p.m. to 3:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Monday)
2021-10-11 17:30 - 2021-11-01 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Mondays starting October 11, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Tuesday FDL)
2021-10-12 17:30 - 2021-11-02 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Tuesdays starting October 12, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Fond du Lac Training Center, FDL Classroom

Instructor: C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Thursday)
2021-10-14 17:30 - 2021-11-04 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Thursdays starting October 14, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: M. Ott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, August 13th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, August 13th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Monday AFTERNOON)
2021-11-29 12:30 - 2021-12-20 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Mondays starting November 29, 2021 from 12:30 p.m. to 3:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

HOLIDAY Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Orbital UA Welding Certification
2021-11-29 17:30 - 2021-12-13 20:30 | Kaukauna Training Center, ,
Orbital UA Welding Certification

Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting November 29, 2021 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: K. Agamaite

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

HOLIDAY Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Monday)
2021-11-29 17:30 - 2021-12-20 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Mondays starting November 29, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

HOLIDAY Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Service Pipe Math & Tube Bending
2021-11-30 17:30 - 2021-12-16 20:30 | Kaukauna Training Center, ,
Service Pipe Math & Tube Bending

Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting November 30, 2021 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: B. Rexses

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

HOLIDAY Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Tuesday)
2021-11-30 17:30 - 2021-12-21 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Tuesdays starting November 30, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: M. Ott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Refrigeration/CFC Certification
2021-11-30 17:30 - 2021-12-14 20:30 | Kaukauna Training Center, ,
Basic Refrigeration/CFC Certification

Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting November 30, 2021 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: B. Pigeon

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat Transfer
Temperature/Pressure Relationship
Safety

This course also prepares students to test for CFC Certification in Type 1 (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (encompasses Type I, II, & III).

HOLIDAY Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Wednesday)
2021-12-01 17:30 - 2021-12-22 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Wednesdays starting December 1, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: M. Ott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

FALL Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Wednesday FDL)
2021-12-01 17:30 - 2021-12-22 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Wednesday starting December 1, 2021 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Fond du Lac Training Center, FDL Classroom

Instructor: C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

HOLIDAY Class Enrollment Deadline: Friday, November 19th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, November 19th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Math ONLINE
2021-12-06 - 2022-02-27
Basic Math ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting December 6, 2021 to February 27, 2022

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation ONLINE
2021-12-06 - 2022-02-27
New Member Orientation ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting December 6, 2021 to February 27, 2022

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: New Member Orientation Binder

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2021-12-06 - 2022-02-27
Transition to Trainer

Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting December 6, 2021 to February 27, 2022

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use and Care of Tools/Local 400 Shop ONLINE
2021-12-06 - 2022-02-27
Use & Care of Tools/Local 400 Shop ONLINE

Pre-Requisite: New Member Orientation

Day/Time: Online, Self Paced, starting December 6, 2021 to February 27, 2022

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2021-12-06 - 2022-02-27
Union 101: UA & Labor History ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting December 6, 2021 to February 27, 2022

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Building Trades WRITTEN Testing (Changing UA Card to Pipefitter)
2021-12-06 17:00 - 20:00 | Kaukauna Training Center, ,
Building Trades WRITTEN Testing – Changing your UA Card to Pipefitter

Pre-Requisite: Completion of a UA 400 Building Trades Apprenticeship and a minimum of one year as a Building Trades Journeyman.

Recommended Courses to be passed prior to testing:

Tube Bending
Advanced Rigging

Requirement waived if you have a current EPRI Rigging Certification

Soldering and Brazing

Requirement waived if you have a current UA 51 Welding Certification

Advanced Pipe Math

Must have been taken within 3 years of testing

Welding

Requirement waived if you have a current UA 60 and UA 21 Welding Certification

Day/Time: Monday, December 6, 2021 from 5:00 p.m. to 8:00 p.m.

Location: Kaukauna Training Center, Room TBD

Proctor: Steamfitting Examining Board

Testing Description: A written test must be passed prior to any practical testing. The written testing is based upon common pipefitting concepts and pipe math. Review material is available on the UA 400 Website.

Must be proficient in the following skills:

Stick and TIG Welding
Advanced Rigging
Soldering and Brazing
Tube Bending
Threading of Carbon Pipe
45° Laterals
Mitered Fittings

Building Trades PRACTICAL Testing (Changing UA Card to Pipefitter)
2021-12-10 07:30 - 15:30 | Kaukauna Training Center, ,
Building Trades PRACTICAL Testing – Changing your UA Card to Pipefitter

Pre-Requisite: Completion of a UA 400 Building Trades Apprenticeship and a minimum of one year as a Building Trades Journeyman.

Recommended Courses to be passed prior to testing:

Tube Bending
Advanced Rigging

Requirement waived if you have a current EPRI Rigging Certification

Soldering and Brazing

Requirement waived if you have a current UA 51 Welding Certification

Advanced Pipe Math

Must have been taken within 3 years of testing

Welding

Requirement waived if you have a current UA 60 and UA 21 Welding Certification

Day/Time: Friday, December 10, 2021 from 7:30 a.m. to 3:30 p.m.

Location: Kaukauna Training Center, Room TBD

Proctor: Steamfitting Examining Board

Testing Description: A written test must be passed prior to any practical testing. The written testing is based upon common pipefitting concepts and pipe math. Review material is available on the UA 400 Website.

Must be proficient in the following skills:

Stick and TIG Welding
Advanced Rigging
Soldering and Brazing
Tube Bending
Threading of Carbon Pipe
45° Laterals
Mitered Fittings

Soldering & Brazing Test Out
2021-12-20 16:30 - 19:30 | Kaukauna Training Center, ,
Soldering and Brazing TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on December 20, 2021

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications Test Out
2021-12-20 16:30 - 19:30 | Kaukauna Training Center, ,
Pipe Joining Applications TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on December 21, 2021

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending Test Out
2021-12-20 16:30 - 19:30 | Kaukauna Training Center, ,
Tube Bending TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on December 20, 2021

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Blueprint Reading – Fabricators (AFTERNOON)
2022-01-03 12:30 - 2022-03-07 15:30 | Kaukauna Training Center, ,
Blueprint Reading – Fabricators

Pre-Requisite: N/A

Day/Time: Mondays starting January 3, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Valve Repair Certification (EPRI)
2022-01-03 17:00 - 2022-01-31 21:00 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting January 3, 2022 from 5:00 p.m. to 9:00 p.m. for 5 weeks AND Saturday, January 22, 2022 from 5 p.m. to p.m.

Location: Kaukauna Training Center, Room TBD

Instructor: Ryan Wanta and Jesse Drzewiecki

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: The objective of the United Association Valve Technician Certification Program is to provide highly qualified Valve Technicians to fulfill the quality and craftsmanship requirements governing valve maintenance and repair activities. The learning units include:

Introduction to Valves
Error Free Maintenance
Valve Information & Prints
Precision Measuring
Fasteners and Torquing
Flanges
Valve Packing
Gate & Globe Valves
Diaphragm, Butterfly, Ball, and Plug Valves
Introduction to Control Valves
Safety, Relief, and Check Valves

Plumbing Applications
2022-01-03 17:30 - 2022-02-21 20:30 | Kaukauna Training Center, ,
Plumbing Applications

Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: A. Koenigs, M. Tessmer & T. Adams

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Plumbing Service & Repair
2022-01-03 17:30 - 2022-04-11 20:30 | Kaukauna Training Center, ,
Plumbing Service & Repair

Pre-Requisite: N/A

Day/Time: Mondays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: T. Grose, C. Boylan, and N. Grams

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will concentrate on hands-on skills training utilizing plumbing service mobile classroom training modules and appropriate tools and equipment. The course emphasizes the customer service and communication skills needed in the plumbing service industry. It will include material referencing plumbing service troubleshooting, repair installation, sales, business operations, vehicles and equipment, and company policies.

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Soldering & Brazing (Monday)
2022-01-03 17:30 - 2022-03-14 20:30 | Kaukauna Training Center, ,
Soldering & Brazing

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: M. Tessmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

DDC Controls/VFD’s
2022-01-03 17:30 - 2022-03-21 20:30 | Kaukauna Training Center, ,
DDC Controls/VFD’s

Pre-Requisite: N/A

Day/Time: Mondays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: C. Nackers and A. Torbeck

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Blueprint Reading – Fabricators
2022-01-03 17:30 - 2022-03-07 20:30 | Kaukauna Training Center, ,
Blueprint Reading – Fabricators

Pre-Requisite: N/A

Day/Time: Mondays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Krejcarek

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Monday)
2022-01-03 17:30 - 2022-03-07 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Pipe Trades Math (Monday)
2022-01-03 17:30 - 2022-03-14 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math

Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Monday FDL)
2022-01-03 17:30 - 2022-03-07 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting January 3, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center, Weld Shop

Instructor: T. Tabbert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Tuesday)
2022-01-04 17:30 - 2022-03-08 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Tube Bending (Tuesday)
2022-01-04 17:30 - 2022-03-15 20:30 | Kaukauna Training Center, ,
Tube Bending

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Soldering & Brazing (Tuesday)
2022-01-04 17:30 - 2022-03-15 20:30 | Kaukauna Training Center, ,
Soldering & Brazing

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: D. Brazzale

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Rigging for the Shop and Field (FDL)
2022-01-04 17:30 - 2022-03-08 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Basic Rigging for the Shop and Field

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center, FDL Classroom

Instructor: C. Peterson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to education the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Trades Math (Steamfitters/Fabricators)
2022-01-04 17:30 - 2022-03-08 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Steamfitters & Fabricators

Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: P. Markowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Joining Applications (Tuesday)
2022-01-04 17:30 - 2022-03-08 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: N. Reitzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Rigging with Crane Signal Certification
2022-01-04 17:30 - 2022-03-15 20:30 | Kaukauna Training Center, ,
Advanced Rigging with Crane Signal Certification

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Saari

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Blueprint Reading – Steamfitters (Tuesday)
2022-01-04 17:30 - 2022-03-08 20:30 | Kaukauna Training Center, ,
Blueprint Reading – Steamfitters

Pre-Requisite: N/A

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Trades Math (Steamfitters/Fabricators)
2022-01-04 17:30 - 2022-03-08 20:30 | Kaukauna Training Center, ,
Pipe Trades Math for Steamfitters & Fabricators

Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

4th Year HVAC Service Related
2022-01-04 17:30 - 2022-03-15 20:30 | Kaukauna Training Center, ,
4th Year HVAC Service Related

Pre-Requisite: N/A

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: S. Salentine

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Service Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Rigging with Crane Signal Certification
2022-01-04 17:30 - 2022-03-15 20:30 | Kaukauna Training Center, ,
Advanced Rigging with Crane Signal Certification

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Tuesdays starting January 4, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: B. Rexses

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights
NCCCO Signalperson Certification

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

UA Local 400 Heritage (AFTERNOON)
2022-01-05 12:30 - 2022-03-30 15:30 | Kaukauna Training Center, ,
UA Local 400 Heritage

Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 5, 2022 from 12:30 p.m. to 3:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
New Member Binder

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Welding (Wednesday AFTERNOON)
2022-01-05 12:30 - 2022-03-09 15:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 5, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Wednesday FDL)
2022-01-05 17:30 - 2022-03-09 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 5, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center, Weld Shop

Instructor: C. Schultz

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

OSHA 30 Certification (Construction Safety) (FDL)
2022-01-05 17:30 - 2022-03-09 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
OSHA 30 Certification (Construction Safety)

Pre-Requisite: N/A

Day/Time: Wednesdays starting January 5, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center, FDL Classroom

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Rigging for the Shop and Field
2022-01-05 17:30 - 2022-03-09 20:30 | Kaukauna Training Center, ,
Basic Rigging for the Shop and Field

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 5, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: D. Pugh

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to education the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

UA Local 400 Heritage
2022-01-05 17:30 - 2022-03-30 20:30 | Kaukauna Training Center, ,
UA Local 400 Heritage

Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 5, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Union Hall, Meeting Classroom

Instructor: K. Rademaker/J. Burhow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
New Member Binder

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

UA Local 400 Heritage
2022-01-05 17:30 - 2022-03-30 20:30 | Kaukauna Training Center, ,
UA Local 400 Heritage

Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 5, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Meeting Classroom

Instructor: K. Rademaker/J. Burhow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
New Member Binder

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Basic Rigging for the Shop and Field
2022-01-05 17:30 - 2022-03-09 20:30 | Kaukauna Training Center, ,
Basic Rigging for the Shop and Field

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 5, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to education the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Wednesday)
2022-01-05 17:30 - 2022-03-09 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 5, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Pipe Trades Math (AFTERNOON)
2022-01-06 12:30 - 2022-03-31 15:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math

Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting August 23, 2021 from 12:30 p.m. to 3:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Joining Applications (AFTERNOON)
2022-01-06 12:30 - 2022-03-10 15:30 | Kaukauna Training Center, ,
Pipe Joining Applications

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 6, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Pipe Trades Math (Thursday)
2022-01-06 17:30 - 2022-03-17 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math

Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Thursday)
2022-01-06 17:30 - 2022-03-10 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Mechanical Equipment Service (MES) 2
2022-01-06 17:30 - 2022-03-17 20:30 | Kaukauna Training Center, ,
Mechanical Equipment Service (MES) 2

Pre-Requisite: Mechanical Equipment Service (MES) 1

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Basement Classroom

Instructor: B. Hagens, J. Valence, and A. Torbeck

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Tube Bending (Thursday)
2022-01-06 17:30 - 2022-03-17 20:30 | Kaukauna Training Center, ,
Tube Bending

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Blueprint Reading – Steamfitters (Thursday)
2022-01-06 17:30 - 2022-03-10 20:30 | Kaukauna Training Center, ,
Blueprint Reading – Steamfitters

Pre-Requisite: N/A

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

4th Year Steamfitter Related (Thursday)
2022-01-06 17:30 - 2022-03-17 20:30 | Kaukauna Training Center, ,
4th Year Steamfitter Related

Pre-Requisite: N/A

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: C. Markowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

4th Year Steamfitter Related (Thursday)
2022-01-06 17:30 - 2022-03-17 20:30 | Kaukauna Training Center, ,
4th Year Steamfitter Related

Pre-Requisite: N/A

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: C. Markowski & C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Relay Logic & PLC
2022-01-06 17:30 - 2022-03-24 20:30 | Kaukauna Training Center, ,
Relay Logic & PLC

Pre-Requisite: N/A

Day/Time: Thursdays starting January 6, 2022 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: D. Mercier and S. Salentine

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Monday)
2022-01-09 17:30 - 2022-03-13 20:30, 2023-01-09 17:30 - 2023-03-13 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting January 9, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Welding (Tuesday)
2022-01-10 17:30 - 2022-03-14 20:30, 2023-01-10 17:30 - 2023-03-14 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Welding (Wednesday)
2022-01-11 17:30 - 2022-03-08 20:30, 2023-01-11 17:30 - 2023-03-15 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Isometric Drawing – Plumbers
2022-01-12 17:30 - 2022-03-02 20:30 | Kaukauna Training Center, ,
Isometric Drawing – Plumbers

Pre-Requisite: Blueprint Reading for Plumbers

Day/Time: Wednesdays starting January 12, 2022 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Monday)
2022-01-17 17:30 - 2022-02-07 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Mondays starting January 17, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Thursday)
2022-01-20 17:30 - 2022-02-10 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Thursdays starting January 20, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: P. Carlson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

WINTER Class Enrollment Deadline: Friday, December 10th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, December 10th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Valve Repair Certification (EPRI)
2022-02-07 17:00 - 2022-02-21 21:00 | Kaukauna Training Center, ,
Pre-Requisite: EPRI Basic Valve Repair Certification

Day/Time: Mondays AND Wednesdays starting February 7, 2022 from 5:00 p.m. to 9:00 p.m. for 2.5 weeks AND Saturday, February 12, 2022 from 7 a.m. to 4:00 p.m.

Location: Kaukauna Training Center, Room TBD

Instructor: R. Wanta & J. Drzewiecki

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The objective of the United Association Valve Technician Certification Program is to provide highly qualified Valve Technicians to fulfill the quality and craftsmanship requirements governing valve maintenance and repair activities. The learning units include:

Introduction to Valves
Error Free Maintenance
Valve Information & Prints
Precision Measuring
Fasteners and Torquing
Flanges
Valve Packing
Gate & Globe Valves
Diaphragm, Butterfly, Ball, and Plug Valves
Introduction to Control Valves
Safety, Relief, and Check Valves

Use and Care of Tools/Local 400 Shop ONLINE
2022-03-07 - 2022-05-22
Use & Care of Tools/Local 400 Shop ONLINE

Pre-Requisite: New Member Orientation

Day/Time: Online, Self Paced, starting March 7, 2022 to March 22, 2022

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2022-03-07 - 2022-05-22
Union 101: UA & Labor History ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting March 7, 2022 to May 22, 2022

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400. You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Math ONLINE
2022-03-07 - 2022-05-22
Basic Math ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting March 7, 2022 to May 22, 2022

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation ONLINE
2022-03-07 - 2022-05-22
New Member Orientation ONLINE

Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting March 7, 2022 to May 22, 2022

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: N/A

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Welding (Monday AND Wednesday) (AFTERNOON)
2022-04-11 12:30 - 2022-05-11 15:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 11, 2022 from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

Basic Rigging for the Shop and Field
2022-04-11 17:30 - 2022-05-11 20:30 | Kaukauna Training Center, ,
Basic Rigging for the Shop and Field

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays AND Wednesdays starting April 11, 2021, 2022 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. VanDyke

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to education the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Service Solder, Braze & Welding
2022-04-11 17:30 - 2022-05-11 20:30 | Kaukauna Training Center, ,
Service Solder, Braze & Welding

Pre-Requisite: Use & Care of Tools

Day/Time: Mondays AND Wednesdays starting April 11, 2022 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: D. Schlimm/TBT

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to setup the welding machine to make simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: this class will not teach the apprentice how to weld pipe. The learning units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper Operation of Torch and Welding Equipment

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Monday AND Wednesday)
2022-04-11 17:30 - 2022-05-11 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 11, 2022 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

Blueprint Reading – Steamfitters (Tuesday AND Thursday)
2022-04-12 17:30 - 2022-05-12 20:30 | Kaukauna Training Center, ,
Blueprint Reading – Steamfitters

Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting April 12, 2022 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

SPRING Class Enrollment Deadline: March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Tuesday FDL)
2022-04-12 17:30 - 2022-05-03 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Tuesdays starting April 12, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Fond du Lac Training Center, Safety Classroom

Instructor: C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Backflow/Cross Connection Certification (ASSE)
2022-04-12 17:30 - 2022-05-24 20:30 | Kaukauna Training Center, ,
Backflow/Cross Connection Certification (ASSE)

Pre-Requisite: 5 Years of Piping Experience (Doesn't necessarily need to be Union Piping Experience)

Day/Time: Tuesdays AND Thursdays starting April 12, 2022 from 5:30 p.m. to 8:30 p.m. for 6 ½ weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: B. Elliott, C. Emmer, & R. Siehs

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed for plumbers and other related mechanical contractors. The course covers basic backflow hydraulics, cross-connection identification, degree of hazard, operation of backflow prevention assemblies, applications and basic installation requirements of backflow prevention assemblies. A hands-on workshop will allow students to practice test procedures on the reduced pressure principal assembly, double check valve assembly, and pressure vacuum breaker. ASSE certification in backflow prevention assembly testing, repairing, and surveying adds nationally recognized credentials to your resume, enhances your skills, and increases the number of tasks you can perform – ultimately raising your employability.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

EPRI Rigging & Crane Signal Certification
2022-04-12 17:30 - 2022-06-14 20:30 | Kaukauna Training Center, ,
EPRI Rigging & Crane Signal Certification

Pre-Requisite: Advanced Rigging, Basic Rigging, Pipe Trades Math for Steamfitters and Fabricators, Basic Math Online

Day/Time: Tuesdays starting April 20, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: C. Saari

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Red ITP Crane Book
Math/Tube Bending Cards

Course Description: The objective of the United Association Industrial Rigging Certification Program is to provide highly qualified Industrial Riggers to fulfill the quality and workmanship requirements governing rigging activities. The training program consists of 60 to 80 hours of training, of which a minimum of 35% must be hands-on practical exercises. Copies of the Industrial Rigging Training Manual and IPT’s Crane and Rigging Handbook are available from the IPT Bookstore for individuals to use during the Industrial Rigging training programs.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Advanced Pipe Trades Math
2022-04-12 17:30 - 2022-05-24 20:30 | Kaukauna Training Center, ,
Advanced Pipe Trades Math

Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays AND Thursdays starting April 12, 2022 from 5:30 p.m. to 8:30 p.m. for 6.5 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Joining Applications
2022-04-12 17:30 - 2022-05-12 20:30 | Kaukauna Training Center, ,
Pipe Joining Applications

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 12, 2022 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: N. Reitzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Welding (Tuesday AND Thursday)
2022-04-12 17:30 - 2022-05-12 20:30 | Kaukauna Training Center, ,
Welding

Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays AND Thursdays starting April 12, 2022 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW - Pipe

First Aid/CPR/AED Certification (Thursday)
2022-04-14 17:30 - 2022-05-05 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Thursdays starting April 14, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: P. Carlson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Service Pipe Math & Tube Bending
2022-04-19 17:30 - 2022-04-28 20:30 | Kaukauna Training Center, ,
Service Pipe Math & Tube Bending

Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 19, 2022 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: B. Rexses

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Transit, Level & Laser
2022-04-20 17:30 - 2022-05-25 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser

Pre-Requisite: N/A

Day/Time: Wednesdays starting April 20, 2022 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

OSHA 30 Certification (Construction Safety)
2022-04-25 17:30 - 2022-05-11 20:30 | Kaukauna Training Center, ,
OSHA 30 Certification (Construction Safety)

Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting April 25, 2022 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Meeting Classroom

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED RE-CERTIFICATION (AFTERNOON)
2022-05-09 12:30 - 15:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Re-certification

Pre-Requisite: VALID (non-expired) First Aid/CPR/AED Certification

Day/Time: Monday, May 9, 2022 from 12:30 p.m. to 3:30 p.m.

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description:

This course is required BEFORE your expiration date; if you have an expired First Aid/CPR/AED Certification, you are required to re-take the entire course again.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Tuesday)
2022-05-10 17:30 - 2022-05-31 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Tuesdays starting May 10, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

First Aid/CPR/AED Certification (Thursday)
2022-05-12 17:30 - 2022-05-26 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Thursdays starting May 12, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: P. Carlson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Transit, Level & Laser
2022-05-26 17:30 - 2022-06-30 20:30 | Kaukauna Training Center, ,
Transit, Level & Laser

Pre-Requisite: N/A

Day/Time: Thursdays starting May 26th, 2022 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: R. Hopfensperberg

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Transition to Trainer ONLINE
2022-06-01 - 2022-08-21
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting June 1 through August 21.

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

OSHA 30 Certification (Construction Safety) ONLINE
2022-06-01 - 2022-08-21, 2022-08-29 - 2022-11-27, 2022-12-05 - 2023-02-26, 2023-03-06 - 2023-05-21
Pre-Requisite: N/A

Day/Time: Online, Self Paced, Completion Required within 60 Days of Receiving the Code

Location: Online, N/A

Instructor: N/A, Third Party: Click Safety

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices.

Digital Multimeter Basics ONLINE
2022-06-01 - 2022-08-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1, 2022 to August 21, 2022

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

TBD

This is a required class PRIOR to starting Day School for HVAC Service Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades Benefits Introduction ONLINE
2022-06-01 - 2022-08-21, 2022-08-29 - 2022-11-27, 2022-12-05 - 2023-02-26, 2023-03-06 - 2023-05-21
Pre-Requisite:

New Member Orientation Online

Day/Time: Online, Self Paced, starting June 1, 2022 to August 21, 2022

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

TBD

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2022-06-01 - 2022-08-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1 though August 21.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop ONLINE
2022-06-01 - 2022-08-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1, 2022 though August 21, 2022.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation - ONLINE
2022-06-01 - 2022-08-21
Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting June 1 though August 21.

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: N/A

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Math ONLINE
2022-06-01 - 2022-08-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1st through August 21st.

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

First Aid/CPR/AED Certification (Thursday)
2022-06-02 17:30 - 2022-06-16 20:30 | Kaukauna Training Center, ,
First Aid/CPR/AED Certification

Pre-Requisite: N/A

Day/Time: Thursdays starting June 2, 2022 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

SPRING Class Enrollment Deadline: Friday, March 25th

If you need to CANCEL A CLASS in which you are enrolled, you must do so by Friday, March 25th. Failure remove yourself from the class by the enrollment deadline and/or attend the class you enrolled in will result in you being charged a non-refundable fee of $100 PER OFFENSE that must be paid before you are eligible to sign up or attend any other Unpaid Related classes the Local 400 Training Department offers.

Pipe Joining Applications Test Out
2022-06-06 16:30 - 19:30 | Kaukauna Training Center, ,
Pipe Joining Applications TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on June 6, 2022

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering & Brazing Test Out
2022-06-06 16:30 - 19:30 | Kaukauna Training Center, ,
Soldering and Brazing TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on June 6, 2022

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending Test Out
2022-06-06 16:30 - 19:30 | Kaukauna Training Center, ,
Tube Bending TEST OUT

Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: MONDAY from 4:30 p.m. to 7:30 p.m. on June 6, 2022

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius/S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

UA Local 400 Heritage (MONDAY and WEDNESDAY)
2022-06-13 17:30 - 2022-07-27 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Mondays AND Wednesdays starting June 13, 2022 from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Tube Bending TEST OUT (AFTERNOON)
2022-06-20 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 20, 2022 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Trades Math for Fitters and Fabricators (AFTERNOON)
2022-08-22 12:30 - 2022-11-07 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Monday AFTERNOONS starting August 22, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: C. Robedeaux

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Soldering & Brazing (MONDAY)
2022-08-22 17:30 - 2022-11-07 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 22, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Plumbing Applications (MONDAYS & WEDNESDAYS)
2022-08-22 17:30 - 2022-10-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting August 22, 2022 from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: T. Adams, A. Koenigs & M. Tessmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Basic Service & Customer Relations
2022-08-22 17:30 - 2022-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting August 22, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: B. Hagens & A. Kloehn

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Troubleshooting Procedures
Troubleshooting Responsibilities
Electrical Safety
Troubleshooting Motors
Troubleshooting Relays and Starters
Troubleshooting Power Service
Value of Customer Service
Communication Skills
Leadership Skills
Service Tech Challenges

DDC Controls/VFD's
2022-08-22 17:30 - 2022-11-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting August 22, 2022 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: T. Grose, C. Nackers and A. Torbeck

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Welding (MONDAY)
2022-08-22 17:30 - 2022-10-31 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting August 22, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Advanced Pipe Trades Math (MONDAY)
2022-08-22 17:30 - 2022-11-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting August 22, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Mechanical Equipment Service
2022-08-23 17:30 - 2022-11-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 23, 2022 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: B. Hagens

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

UA Local 400 Heritage
2022-08-24 17:30 - 2022-11-16 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 24, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: N. Rietzner & J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

UA Local 400 Heritage (VIRTUAL from FDL)
2022-08-24 17:30 - 2022-11-16 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, WI, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 24, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Fond du Lac Training Center (Virtual from the FDL Training Center, NOT Remote)

Instructor: N. Rietzner & J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Advanced Pipe Trades Math (THURSDAY)
2022-08-25 17:30 - 2022-11-17 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting August 25, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Union 101: UA & Labor History ONLINE
2022-08-29 - 2022-11-27
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting August 29 through November 27.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop ONLINE
2022-08-29 - 2022-11-27
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting August 29 through November 27.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2022-08-29 - 2022-11-27
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting August 29 though November 27.

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Pipe Joining Applications (AFTERNOONS)
2022-08-29 12:30 - 2022-11-07 15:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday AFTERNOONS starting August 29, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Basic Rigging for the SHOP (AFTERNOON)
2022-08-30 12:30 - 2022-11-01 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesday AFTERNOONS starting August 30, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks.

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Pipe Trades Math for Fitters and Fabricators
2022-08-30 17:30 - 2022-11-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Olson & J. Tesch

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (TUESDAY)
2022-08-30 17:30 - 2022-11-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: N. Rietzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Welding (TUESDAY)
2022-08-30 17:30 - 2022-11-01 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Pipe Trades Math for Fitters and Fabricators (VIRTUAL from FDL)
2022-08-30 17:30 - 2022-11-01 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, WI, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center (Virtual at FDL Training Center, NOT Remote)

Instructor: J. Olson & J. Tesch

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Blueprint Reading for Steamfitters (TUESDAY)
2022-08-30 17:30 - 2022-11-22 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Pipe Trades Math for Fitters and Fabricators
2022-08-30 17:30 - 2022-11-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: K. Wagner & J. Barlow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Advanced Rigging
2022-08-30 17:30 - 2022-11-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Saari & S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

Tube Bending (TUESDAY)
2022-08-30 17:30 - 2022-11-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 30, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Welding (WEDNESDAY AFTERNOON)
2022-08-31 12:30 - 2022-11-02 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesday AFTERNOONS starting August 31, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Blueprint Reading for Plumbers
2022-08-31 17:30 - 2022-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting August 31, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Welding (WEDNESDAY in FDL)
2022-08-31 17:30 - 2022-11-02 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 31, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Soldering & Brazing (WEDNESDAY)
2022-08-31 17:30 - 2022-11-09 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 31, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: M. Tessmer & R. VanderGrinten

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Welding (WEDNESDAY)
2022-08-31 17:30 - 2022-11-02 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 31, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Basic Rigging for the FIELD
2022-08-31 17:30 - 2022-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 31, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: J VanDyke

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Basic Rigging for the FIELD
2022-08-31 17:30 - 2022-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 31, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Basic Rigging for the SHOP
2022-08-31 17:30 - 2022-11-02 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 31, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks.

Location: Kaukauna Training Center, Safety Classroom

Instructor: W. Kempka

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Metallurgy (AFTERNOON)
2022-09-01 12:30 - 2022-11-03 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130 , United States
Pre-Requisite: N/A

Day/Time: Thursday AFTERNOONS starting September 1, 2022 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

Tube Bending (THURSDAY)
2022-09-01 17:30 - 2022-11-10 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting September 1, 2022 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Blueprint Reading for Steamfitters (THURSDAY)
2022-09-01 17:30 - 2022-12-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting September 1, 2022 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Welding (THURSDAY)
2022-09-01 17:30 - 2022-11-03 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting September 1, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Metallurgy
2022-09-01 17:30 - 2022-11-03 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130 , United States
Pre-Requisite: N/A

Day/Time: Thursdays starting September 1, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: S. Krejcarek

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

OSHA 30 Certification (Construction Safety)
2022-09-01 17:30 - 2022-11-03 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting September 1, 2022 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: N. Berger and B. Zaremba

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices.

First Aid/CPR/AED Certification (TUESDAY)
2022-09-06 17:30 - 2022-09-27 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting September 6, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2022-09-12 17:30 - 2022-10-03 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting September 12, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2022-10-10 17:30 - 2022-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting October 10, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2022-10-11 17:30 - 2022-11-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting October 11, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Orbital UA Welding Certification (Mondays AND Wednesdays)
2022-10-31 17:30 - 2022-11-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting October 31, 2022 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: K. Agamaite

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

First Aid/CPR/AED Certification (AFTERNOON)
2022-11-28 12:30 - 2022-12-19 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Monday AFTERNOONS starting November 28, 2022 from 12:30 p.m. to 3:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2022-11-28 17:30 - 2022-12-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting November 28, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Math ONLINE
2022-12-05 - 2023-02-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 5, 2022 through February 26, 2023

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation - ONLINE
2022-12-05 - 2023-02-26
Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting December 2, 2022 through February 26, 2023.

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: N/A

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2022-12-05 - 2023-02-26
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting December 5, 2022 through February 26, 2023.

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2022-12-05 - 2023-02-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 5, 2022 through February 26, 2023.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop ONLINE
2022-12-05 - 2023-02-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 5, 2022 through February 26, 2023.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Digital Multimeter Basics ONLINE
2022-12-05 - 2023-02-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 5, 2022 to February 26, 2023.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

TBD

This is a required class PRIOR to starting Day School for HVAC Service Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

First Aid/CPR/AED Certification (FDL)
2022-12-05 17:30 - 2022-12-14 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, WI, United States
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting December 5, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Fond du Lac Training Center, Safety Classroom

Instructor: C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Refrigeration/CFC Certification
2022-12-05 17:30 - 2022-12-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting December 5, 2022 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: T. Grossman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat Transfer
Temperature/Pressure Relationship
Safety

This course also prepares students to test for CFC Certification in Type 1 (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (encompasses Type I, II, & III).

Orbital UA Welding Certification (Mondays AND Wednesdays)
2022-12-05 17:30 - 2022-12-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting December 5, 2022 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: K. Agamaite

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Youth Apprentice Skills Workshop (Tuesday AND Thursday)
2022-12-06 17:30 - 2022-12-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools

Day/Time: Tuesdays AND Thursdays starting December 6, 2022 from 5:30 p.m. to 8:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: DJ Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Threading Pipe
Torching Metal
Soldering Copper
Welding
Safety

Service Pipe Math & Tube Bending
2022-12-06 17:30 - 2022-12-22 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting December 6, 2022 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

First Aid/CPR/AED Certification (TUESDAY and THURSDAY)
2022-12-06 17:30 - 2022-12-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays and Thursdays starting December 6, 2022 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Tube Bending TEST OUT
2022-12-12 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 12, 2022 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT
2022-12-12 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 12, 2022 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Building Trades WRITTEN Testing (Changing UA Card to Pipefitter)
2022-12-12 17:00 - 20:00 | Kaukauna Training Center, ,
Building Trades WRITTEN Testing – Changing your UA Card to Pipefitter

Pre-Requisite: Completion of a UA 400 Building Trades Apprenticeship and a minimum of one year as a Building Trades Journeyman.

Recommended Courses to be passed prior to testing:

Tube Bending
Advanced Rigging

Requirement waived if you have a current EPRI Rigging Certification

Soldering and Brazing

Requirement waived if you have a current UA 51 Welding Certification

Advanced Pipe Math

Must have been taken within 3 years of testing

Welding

Requirement waived if you have a current UA 60 and UA 21 Welding Certification

Day/Time: Monday, December 12th, 2022 from 5:00 p.m. to 8:00 p.m.

Location: Kaukauna Training Center, Room TBD

Proctor: Steamfitting Examining Board

Testing Description: A written test must be passed prior to any practical testing. The written testing is based upon common pipefitting concepts and pipe math. Review material is available on the UA 400 Website.

Must be proficient in the following skills:

Stick and TIG Welding
Advanced Rigging
Soldering and Brazing
Tube Bending
Threading of Carbon Pipe
45° Laterals
Mitered Fittings

Building Trades PRACTICAL Testing (Changing UA Card to Pipefitter)
2022-12-16 07:30 - 15:30 | Kaukauna Training Center, ,
Building Trades PRACTICAL Testing – Changing your UA Card to Pipefitter

Pre-Requisite: Completion of a UA 400 Building Trades Apprenticeship and a minimum of one year as a Building Trades Journeyman.

Recommended Courses to be passed prior to testing:

Tube Bending
Advanced Rigging

Requirement waived if you have a current EPRI Rigging Certification

Soldering and Brazing

Requirement waived if you have a current UA 51 Welding Certification

Advanced Pipe Math

Must have been taken within 3 years of testing

Welding

Requirement waived if you have a current UA 60 and UA 21 Welding Certification

Day/Time: Friday, December 16th, 2022 from 7:30 a.m. to 3:30 p.m.

Location: Kaukauna Training Center, Room TBD

Proctor: Steamfitting Examining Board

Testing Description: A written test must be passed prior to any practical testing. The written testing is based upon common pipefitting concepts and pipe math. Review material is available on the UA 400 Website.

Must be proficient in the following skills:

Stick and TIG Welding
Advanced Rigging
Soldering and Brazing
Tube Bending
Threading of Carbon Pipe
45° Laterals
Mitered Fittings

Blueprint Reading for Fabricators (AFTERNOON)
2023-01-09 12:30 - 2023-03-13 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 9, 2023 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

First Aid/CPR/AED Certification (MONDAY)
2023-01-09 17:30 - 2023-01-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 9, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

DDC Controls/VFD's
2023-01-09 17:30 - 2023-03-27 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 9, 2023 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: T. Grose, C. Nackers and A. Torbeck

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Plumbing Service & Repair
2023-01-09 17:30 - 2023-04-17 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 9, 2023 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: T. Grose, C. Boylan, and N. Grams

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will concentrate on hands-on skills training utilizing plumbing service mobile classroom training modules and appropriate tools and equipment. The course emphasizes the customer service and communication skills needed in the plumbing service industry. It will include material referencing plumbing service troubleshooting, repair installation, sales, business operations, vehicles and equipment, and company policies.

4th Year Steamfitter Related (MONDAY)
2023-01-09 17:30 - 2023-03-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 9, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Advanced Pipe Trades Math (MONDAY)
2023-01-09 17:30 - 2023-04-03 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting January 9, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: N. Schauland

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Blueprint Reading for Fabricators
2023-01-09 17:30 - 2023-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 9, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Krejcarek

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

Advanced Rigging
2023-01-10 17:30 - 2023-03-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Saari & S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

First Aid/CPR/AED Certification (TUESDAY)
2023-01-10 17:30 - 2023-01-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Pipe Trades Math for Fitters and Fabricators
2023-01-10 17:30 - 2023-03-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: K. Wagner & J. Tesch

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (TUESDAY)
2023-01-10 17:30 - 2023-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: N. Rietzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

4th Year HVAC Service Related
2023-01-10 17:30 - 2023-03-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: B. Davister

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Service Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Tube Bending (TUESDAY)
2023-01-10 17:30 - 2023-03-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Pipe Trades Math for Fitters and Fabricators (VIRTUAL from FDL)
2023-01-10 17:30 - 2023-03-14 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, WI, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center (Virtual from the FDL Training Center, NOT Remote)

Instructor: J. Olson & J. Barlow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Blueprint Reading for Steamfitters (TUESDAY)
2023-01-10 17:30 - 2023-04-04 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Welding (WEDNESDAY AFTERNOON)
2023-01-11 12:30 - 2023-03-15 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesday AFTERNOONS starting January 5, 2023 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Medical Gas Certification
2023-01-11 17:30 - 2023-03-22 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 4 Years of Piping Experience per NITC

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: D. Huth and R. Krause

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: A Medical Gas Installer certification candidate is a qualified individual who can demonstrate competence within their scope and will be proficient in and experienced in the installation of medical gas and vacuum systems covered by the ASSE Series 6000 Standard. Installers include anyone who works on or installs piping or components, including brazers. A qualified Medical Gas Installer may perform these tasks alone, or through the supervision of other individuals.

In addition to knowledge of product installation, a Medical Gas Installer is required to have a general knowledge of the applicable laws, codes, rules, listing agencies, and regulations from the federal, state, and local levels pertaining to medical gas and vacuum systems as well as knowledge of product performance, system and system component testing, documenting and recording, and medical gas terminology. Medical gas systems and equipment covered in the ASSE Series 6000 Standard include health care facilities within the scope of NFPA 99, Health Care Facilities Code. Medical gas piping systems include vacuum piping.

Soldering & Brazing (WEDNESDAY)
2023-01-11 17:30 - 2023-03-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: R. VanderGrinten

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Welding (WEDNESDAY in FDL)
2023-01-11 17:30 - 2023-03-15 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Fond du Lac Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Basic Rigging for the FIELD
2023-01-11 17:30 - 2023-03-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: J VanDyke

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Basic Rigging for the FIELD
2023-01-11 17:30 - 2023-03-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: D. Pugh

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Plumbing Applications
2023-01-11 17:30 - 2023-04-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: T. Adams, N. Leiser & M. Tessmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Isometric Drawing for Plumbers
2023-01-11 17:30 - 2023-03-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Blueprint Reading for Plumbers

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

Basic Rigging for the SHOP
2023-01-11 17:30 - 2023-03-15 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 11, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks.

Location: Kaukauna Training Center, Safety Classroom

Instructor: W. Kempka

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Advanced Pipe Trades Math (AFTERNOON)
2023-01-12 12:30 - 2023-04-06 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting January 12, 2023 from 12:30 p.m. to 3:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Tube Bending (THURSDAY)
2023-01-12 17:30 - 2023-03-23 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 12, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Blueprint Reading for Steamfitters (THURSDAY)
2023-01-12 17:30 - 2023-04-06 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 12, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

OSHA 30 Certification (Construction Safety)
2023-01-12 17:30 - 2023-03-16 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 12, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: B. Zaremba

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices.

4th Year Steamfitter Related (THURSDAY)
2023-01-12 17:30 - 2023-03-23 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 12, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Welding (THURSDAY)
2023-01-12 17:30 - 2023-03-16 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting January 12, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Relay Logic & PLC
2023-01-12 17:30 - 2023-03-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 12, 2023 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: D. Mercier and J. Benz

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Mechanical Equipment Service
2023-01-12 17:30 - 2023-04-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 10, 2023 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: B. Hagens

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Soldering & Brazing (MONDAY)
2023-01-16 17:30 - 2023-03-27 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 16, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: M. Tessmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

UA Local 400 Heritage (AFTERNOON)
2023-02-08 12:30 - 2023-05-03 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting February 8th, 2023 from 12:30 p.m. to 3:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

First Aid/CPR/AED Certification (MONDAY)
2023-02-13 17:30 - 2023-03-06 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting February 13, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2023-02-14 17:30 - 2023-03-07 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting February 14, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Math ONLINE
2023-03-06 - 2023-05-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 6 through May 21.

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop ONLINE
2023-03-06 - 2023-05-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 6 through May 21.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2023-03-06 - 2023-05-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 6 through May 21.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Digital Multimeter Basics ONLINE
2023-03-06 - 2023-05-21
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 6, 2023 to May 21, 2023.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

TBD

This is a required class PRIOR to starting Day School for HVAC Service Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2023-03-06 - 2023-05-21
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting March 6 through May 21.

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

First Aid/CPR/AED Certification (TUESDAY)
2023-03-14 17:30 - 2023-04-04 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting March 14, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

UA Local 400 Heritage
2023-03-15 17:30 - 2023-06-07 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting February 8, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: N. Rietzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

UA Local 400 Heritage (VIRTUAL from FDL)
2023-03-15 17:30 - 2023-06-07 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, WI, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting February 8, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Fond du Lac Training Center (Virtual from the FDL Training Center, NOT Remote)

Instructor: N. Rietzner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Tube Bending TEST OUT
2023-04-03 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, April 3, 3023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications TEST OUT
2023-04-03 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive , Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, April 3, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT
2023-04-03 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, April 3, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Welding (MONDAY and WEDNESDAY AFTERNOON)
2023-04-10 12:30 - 2023-05-10 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Monday AND Wednesday AFTERNOONS starting April 10, 2023 from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Service Solder, Braze & Welding
2023-04-10 17:30 - 2023-05-10 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 10, 2023 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: B. Davister & J. Hooyman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to setup the welding machine to make simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: this class will not teach the apprentice how to weld pipe. The learning units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper Operation of Torch and Welding Equipment

Welding (MONDAY and WEDNESDAY)
2023-04-10 17:30 - 2023-05-10 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 10, 2023 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Youth Apprentice Skills Workshop
2023-04-10 17:30 - 2023-04-24 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools

Day/Time: Mondays starting April 10, 2023 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: DJ Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Threading Pipe
Torching Metal
Soldering Copper
Welding
Safety

Advanced Pipe Trades Math (MONDAY and WEDNESDAY)
2023-04-10 17:30 - 2023-05-22 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays AND WEDNESDAYS starting April 10, 2023 from 5:30 p.m. to 8:30 p.m. for 6.5 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Welding (TUESDAY and THURSDAY)
2023-04-11 17:30 - 2023-05-11 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays AND Thursdays starting April 11, 2023 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Service Pipe Math & Tube Bending
2023-04-11 17:30 - 2023-04-27 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 11, 2023 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

Basic Boilers & Burners
2023-04-11 17:30 - 2023-05-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting April 11, 2023 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Certification Classroom

Instructor: J. Valence

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Backflow/Cross Connection Certification (WI & ASSE)
2023-04-11 17:30 - 2023-05-23 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 5 Years of Piping Experience (Doesn't necessarily need to be Union Piping Experience)

Day/Time: Tuesdays AND Thursdays starting April 11, 2023 from 5:30 p.m. to 8:30 p.m. for 6 ½ weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: B. Elliott & C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed for plumbers and other related mechanical contractors. The course covers basic backflow hydraulics, cross-connection identification, degree of hazard, operation of backflow prevention assemblies, applications and basic installation requirements of backflow prevention assemblies. A hands-on workshop will allow students to practice test procedures on the reduced pressure principal assembly, double check valve assembly, and pressure vacuum breaker. ASSE certification in backflow prevention assembly testing, repairing, and surveying adds nationally recognized credentials to your resume, enhances your skills, and increases the number of tasks you can perform – ultimately raising your employability.

Pipe Joining Applications (Tuesday and Thursday)
2023-04-11 17:30 - 2023-05-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesday & Thursday starting April 10, 2023 from 5:30 p.m. to 8:30 p.m. for 5 weeks.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Orbital UA Welding Certification (SATURDAY)
2023-04-15 07:30 - 2023-04-22 15:30 | Kaukauna Training Center, ,
Pre-Requisite: GTAW Cert.

Day/Time: Saturdays starting April 15th from 7:30 a.m. to 3:30 p.m. for 2 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: K. Agamaite

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

First Aid/CPR/AED Certification (AFTERNOON)
2023-04-17 12:30 - 2023-05-08 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Monday AFTERNOONS starting April 17, 2023 from 12:30 p.m. to 3:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2023-04-17 17:30 - 2023-05-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting April 17, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2023-04-18 17:30 - 2023-05-09 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting April 18, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Transit, Level & Laser
2023-04-20 17:30 - 2023-05-25 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting April 20, 2023 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: R. Hopfensperger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

OSHA 30 Certification (Construction Safety) (FRIDAY DURING THE DAY)
2023-05-05 07:30 - 2023-05-26 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Fridays DURING THE DAY starting May 5, 2023 from 7:30 a.m. to 3:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices.

First Aid/CPR/AED Certification (FDL)
2023-05-30 17:30 - 2023-06-13 20:30 | Fond du Lac Training Center, 460 W. 11th Street, Fond du Lac, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting May 30, 2023 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Fond du Lac Training Center, Safety Classroom

Instructor: C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

OSHA 30 Certification - Construction Safety (ONLINE)
2023-05-31 - 2023-08-20, 2023-08-28 - 2023-11-25, 2023-12-04 - 2024-02-25, 2024-03-04 - 2024-05-26

Metal Trades Benefits Introduction (ONLINE)
2023-05-31 - 2023-08-20
Pre-Requisite:

New Member Orientation Online

Day/Time: Online, Self Paced, starting May 31st through August 20th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

TBD

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Digital Multimeter Basics (ONLINE)
2023-05-31 - 2023-08-20
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting May 31st through August 20th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Digital Multimeter Principles Book (Metal Trades Members owe a $50 deposit, deposit is returned to the Member upon book being returned in good condition)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop (ONLINE)
2023-05-31 - 2023-08-20
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting May 31st through August 20th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Math (ONLINE)
2023-05-31 - 2023-08-20
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting May 31st through August 20th.

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer (ONLINE)
2023-05-31 - 2023-08-20
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting May 31st through August 20th.

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation (ONLINE)
2023-05-31 - 2023-08-20
Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting May 31st through August 20th.

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: N/A

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History (ONLINE)
2023-05-31 - 2023-08-20
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting May 31st through August 20th.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Isometric Drawing - Plumbers
2023-06-05 17:30 - 2023-07-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting June 5, 2023 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

OSHA 30 Certification - Construction Safety
2023-06-06 17:30 - 2023-08-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting June 6, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible to advance to Year 2 wage raise.

First Aid/CPR/AED Certification (TUESDAY)
2023-06-06 17:30 - 2023-06-20 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting June 6, 2023 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

UA Heritage
2023-06-10 - 2023-07-26 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time:

Wednesday, April 10th from 5:30 p.m. to 8:30 p.m.
Tuesday, April 16th from 5:30 p.m. to 8:30 p.m.
Wednesday, April 17th from 5:30 p.m. to 8:30 p.m.
Tuesday, April 23rd from 5:30 p.m. to 8:30 p.m.
Wednesday, April 24th from 5:30 p.m. to 8:30 p.m.
Wednesday, May 1st from 5:30 p.m. to 8:30 p.m.
Wednesday, May 8th from 5:30 p.m. to 8:30 p.m.
Wednesday, May 15th from 5:30 p.m. to 8:30 p.m.
Wednesday, May 22nd from 5:30 p.m. to 8:30 p.m.
Wednesday, May 29th from 5:30 p.m. to 8:30 p.m.
Wednesday, June 5th from 5:30 p.m. to 8:30 p.m.
Wednesday, June 12th from 5:30 p.m. to 8:30 p.m.
Wednesday, June 19th from 5:30 p.m. to 8:30 p.m.

Location: Kaukauna Training Center, Main Meeting Hall Classroom

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

UA Heritage (Virtual from FDL)
2023-06-10 - 2023-07-26 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time:

Saturday, June 10th from 7:00 a.m. to 3:00 p.m.
Monday, June 12th from 5:30 p.m. to 8:30 p.m.
Wednesday, June 14th from 5:30 p.m. to 8:30 p.m.
Wednesday, June 21st from 5:30 p.m. to 8:30 p.m. (Union Meeting @ Kaukauna Meeting Room)
Saturday, June 24th from 7:00 a.m. to 3:00 p.m.
Wednesday, June 28th from 5:30 p.m. to 8:30 p.m.
OFF INDEPENDENCE DAY WEEK
Wednesday, July 12th from 5:30 p.m. to 8:30 p.m.
Wednesday, July 19th from 5:30 p.m. to 8:30 p.m. (Union Meeting @ Kaukauna Meeting Room)
Wednesday, July 26th from 5:30 p.m. to 8:30 p.m.

Location: Virtual from FDL

Instructor: K. Rademaker/J. Beyer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

UA Heritage
2023-06-10 - 2023-07-26 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time:

Saturday, June 10th from 7:00 a.m. to 3:00 p.m.
Monday, June 12th from 5:30 p.m. to 8:30 p.m.
Wednesday, June 14th from 5:30 p.m. to 8:30 p.m.
Wednesday, June 21st from 5:30 p.m. to 8:30 p.m.
Saturday, June 24th from 7:00 a.m. to 3:00 p.m.
Wednesday, June 28th from 5:30 p.m. to 8:30 p.m.
OFF INDEPENDENCE DAY WEEK
Wednesday, July 12th from 5:30 p.m. to 8:30 p.m.
Wednesday, July 19th from 5:30 p.m. to 8:30 p.m.
Wednesday, July 26th from 5:30 p.m. to 8:30 p.m.

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: K. Rademaker/J. Beyer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Tube Bending TEST OUT (AFTERNOON)
2023-06-12 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 12, 2023 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT (AFTERNOON)
2023-06-12 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 12, 2023 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications TEST OUT (AFTERNOON)
2023-06-12 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive , Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 12, 2023 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending TEST OUT
2023-06-12 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 12, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT
2023-06-12 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 12, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications TEST OUT
2023-06-12 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive , Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 12, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Transit, Level & Laser
2023-06-14 17:30 - 2023-07-26 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting June 14, 2023 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: A. Wied

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

Youth Apprentice Skills Workshop (MONDAY & WEDNESDAY)
2023-07-10 17:30 - 2023-07-17 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools

Day/Time: Mondays AND Wednesdays starting July 10, 2023 from 5:30 p.m. to 8:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: DJ Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Threading Pipe
Torching Metal
Soldering Copper
Welding
Safety

First Aid/CPR/AED Certification (TUESDAY)
2023-07-11 17:30 - 2023-07-25 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting July 11, 2023 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Pipe Joining Applications (AFTERNOONS)
2023-08-21 12:30 - 2023-10-30 15:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 21, 2023 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Pipe Trades Math for Steamfitters & Fabricators (AFTERNOONS)
2023-08-21 12:30 - 2023-10-30 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Mondays starting August 21, 2023 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: C. Robedeaux

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Advanced Pipe Trades Math (MONDAY)
2023-08-21 17:30 - 2023-11-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting August 21, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Welding (MONDAY)
2023-08-21 17:30 - 2023-10-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting August 21, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Soldering & Brazing
2023-08-21 17:30 - 2023-11-06 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 21, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: M. Tessmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Advanced Rigging
2023-08-21 17:30 - 2023-11-06 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Mondays starting August 21, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber & D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

Mechanical Equipment Service (MES)
2023-08-22 17:30 - 2023-11-28 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 22, 2023 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: B. Hagens, J. Valence and T. Grose

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Plumbing Applications (TUESDAY & THURSDAY)
2023-08-22 17:30 - 2023-10-10 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting August 22, 2023 from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: T. Adams & N. Leiser

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Advanced Pipe Trades Math (TUESDAY)
2023-08-22 17:30 - 2023-11-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting August 22, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

UA Heritage
2023-08-23 17:30 - 2023-11-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 23, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: K. Rademaker & J. Beyer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

UA Heritage (Virtual from FDL)
2023-08-23 17:30 - 2023-11-15 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 23, 2023 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Virtual from FDL Training Center

Instructor: K. Rademaker & J. Beyer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Basic Math (ONLINE)
2023-08-28 - 2023-11-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting August 28th through November 26th.

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Digital Multimeter Basics (ONLINE)
2023-08-28 - 2023-11-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting August 28th through November 26th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Digital Multimeter Principles Book (Metal Trades Members owe a $50 deposit, deposit is returned to the Member upon book being returned in good condition)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer (ONLINE)
2023-08-28 - 2023-11-26
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting August 28th through November 26th.

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop (ONLINE)
2023-08-28 - 2023-11-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting August 28th through November 26th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History (ONLINE)
2023-08-28 - 2023-11-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting August 28th through November 26th.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

New Member Orientation (ONLINE)
2023-08-28 - 2023-11-26
Pre-Requisite: N/A

Day/Time: Online, Self Paced, starting August 28th through November 26th.

Location: Online, N/A

Instructor: Scott Wenger and Ashley Thompson

Course Materials Needed: N/A

Course Description: This course is required for all new members prior to taking courses through Local 400’s Training Department. The learning units include:

Pre-Requisite Online Classes
Paid Related, Day School (for Apprentices)
Unpaid Related, Night School, and Recommendations
On The Job (OJT Hours) (for Apprentices)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades Benefits Introduction (ONLINE)
2023-08-28 - 2023-11-26
Pre-Requisite:

New Member Orientation Online

Day/Time: Online, Self Paced, starting August 28th through November 26th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed: N/A

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Rigging - SHOP (AFTERNOONS)
2023-08-29 12:30 - 2023-10-31 15:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 29th from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Welding (TUESDAY)
2023-08-29 17:30 - 2023-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesday starting August 29, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Tube Bending (TUESDAY)
2023-08-29 17:30 - 2023-11-07 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 29, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Pipe Trades Math for Steamfitters & Fabricators (Virtual from FDL)
2023-08-29 17:30 - 2023-10-31 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 29, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Virtual from FDL Training Center

Instructor: J. Barlow & A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Trades Math for Steamfitters & Fabricators (TUESDAY)
2023-08-29 17:30 - 2023-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 29, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Barlow & A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (TUESDAY)
2023-08-29 17:30 - 2023-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 29, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Welding (AFTERNOONS)
2023-08-30 12:30 - 2023-11-01 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 30, 2023 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Basic Rigging - FIELD
2023-08-30 17:30 - 2023-11-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 30, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: M. Bice, A. Gussert, & J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Blueprint Reading - Plumbers
2023-08-30 17:30 - 2023-11-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting August 30, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard & C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Basic Rigging - SHOP
2023-08-30 17:30 - 2023-11-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 30, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: W. Kempka

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Welding (WEDNESDAY)
2023-08-30 17:30 - 2023-11-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 30, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Metallurgy (AFTERNOONS)
2023-08-31 12:30 - 2023-11-02 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting August 31, 2023 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Krejcarek

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

Blueprint Reading - Steamfitters
2023-08-31 17:30 - 2023-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting August 31, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Pipe Trades Math for Steamfitters & Fabricators (THURSDAY)
2023-08-31 17:30 - 2023-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Thursdays starting August 31, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Relay Logic & PLC
2023-08-31 17:30 - 2023-11-16 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 1st Year of Day School Complete

Day/Time: Thursdays starting August 31, 2023 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: D. Mercier, J. Benz & B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

OSHA 30 Certification - Construction Safety
2023-08-31 17:30 - 2023-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting August 31, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Classroom

Instructor: B. Zaremba & M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Welding (THURSDAY)
2023-08-31 17:30 - 2023-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting August 31, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Metallurgy
2023-08-31 17:30 - 2023-11-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting August 31, 2023 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: S. Krejcarek

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

Tube Bending (THURSDAY)
2023-08-31 17:30 - 2023-11-09 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting August 31, 2023 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

First Aid/CPR/AED Certification (TUESDAY)
2023-09-05 17:30 - 2023-09-19 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 5, 2023 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2023-09-25 17:30 - 2023-10-09 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting September 25, 2023 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2023-10-10 17:30 - 2023-10-24 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting October 10, 2023 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2023-10-16 17:30 - 2023-10-30 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting October 16, 2023 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY AFTERNOON)
2023-11-27 12:30 - 2023-12-11 16:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting November 27, 2023 from 12:30 p.m. to 4:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Orbital UA Welding Certification (MONDAY & WEDNESDAY)
2023-11-27 17:30 - 2023-12-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite: GTAW Cert.

Day/Time: Mondays AND Wednesdays starting November 27, 2023 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: K. Agamaite

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

First Aid/CPR/AED Certification (MONDAY)
2023-11-27 17:30 - 2023-12-11 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting November 27, 2023 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Service Pipe Math & Tube Bending (TUESDAYS & THURSDAYS)
2023-11-28 17:30 - 2023-12-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting November 28, 2023 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

Youth Apprentice Skills Workshop (TUESDAY & THURSDAY)
2023-11-28 17:30 - 2023-12-05 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools

Day/Time: Tuesdays AND Thursdays starting November 28, 2023 from 5:30 p.m. to 8:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: DJ Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Threading Pipe
Torching Metal
Soldering Copper
Welding
Safety

First Aid/CPR/AED Certification (TUESDAY AND THURSDAY)
2023-11-28 17:30 - 2023-12-05 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting November 28, 2023 from 5:30 p.m. to 9:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Refrigeration/CFC Certification
2023-11-28 17:30 - 2023-12-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting November 28, 2023 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: T. Grossman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat Transfer
Temperature/Pressure Relationship
Safety

This course also prepares students to test for CFC Certification in Type 1 (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (encompasses Type I, II, & III).

Basic Math (ONLINE)
2023-12-04 - 2024-02-25
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 4th through February 25th

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Digital Multimeter Basics (ONLINE)
2023-12-04 - 2024-02-25
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 4th through February 25th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Digital Multimeter Principles Book (Metal Trades Members owe a $50 deposit, deposit is returned to the Member upon book being returned in good condition)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades Benefits Introduction (ONLINE)
2023-12-04 - 2024-02-25
Pre-Requisite:

New Member Orientation Online

Day/Time: Online, Self Paced, starting December 4th through February 25th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed: N/A

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History (ONLINE)
2023-12-04 - 2024-02-25
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 4th through February 25th.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop (ONLINE)
2023-12-04 - 2024-02-25
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 4th through February 25th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Pipe Joining Applications TEST OUT (AFTERNOON)
2023-12-11 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive , Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 11, 2023 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT (AFTERNOON)
2023-12-11 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 11, 2023 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending TEST OUT (AFTERNOON)
2023-12-11 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 11, 3023 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications TEST OUT
2023-12-11 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive , Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 11, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT
2023-12-11 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 11, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending TEST OUT
2023-12-11 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, December 11, 2023 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

First Aid/CPR/AED Certification (Mon/Tue/Wed in FDL)
2023-12-18 17:30 - 2023-12-20 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Pre-Requisite: N/A

Day/Time: Monday, Tuesday AND Wednesday, December 18, 19, & 20, 2023 from 5:30 p.m. to 8:30 p.m.

Location: FDL Training Center

Instructor: C. Emmer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Blueprint Reading - Fabricators (MONDAY AFTERNOON)
2024-01-08 12:30 - 2024-03-11 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 8, 2024 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

Plumbing Service & Repair
2024-01-08 17:30 - 2024-04-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Grose, C. Boylan, and N. Grams

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will concentrate on hands-on skills training utilizing plumbing service mobile classroom training modules and appropriate tools and equipment. The course emphasizes the customer service and communication skills needed in the plumbing service industry. It will include material referencing plumbing service troubleshooting, repair installation, sales, business operations, vehicles and equipment, and company policies.

4th Year Steamfitter Related (MONDAY)
2024-01-08 17:30 - 2024-03-18 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: C. Berendt

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Welding (MONDAY)
2024-01-08 17:30 - 2024-03-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Advanced Pipe Trades Math (MONDAY)
2024-01-08 17:30 - 2024-04-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Basic Rigging - FIELD (MONDAY)
2024-01-08 17:30 - 2024-03-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Basic Rigging - FIELD (MONDAY)
2024-01-08 17:30 - 2024-03-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Advanced Rigging
2024-01-08 17:30 - 2024-03-18 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the Field, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber & D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

DDC Controls/VFD's
2024-01-08 17:30 - 2024-03-25 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 1st Year of Day School Complete

Day/Time: Mondays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: C. Nackers, A. Torbeck & T. Grose

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Welding (TUESDAY)
2024-01-09 17:30 - 2024-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesday starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Tube Bending (TUESDAY)
2024-01-09 17:30 - 2024-03-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Plumbing Applications
2024-01-09 17:30 - 2024-04-16 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, Plumbing Classroom & Solder & Braze Lab

Instructor: T. Adams & N. Leiser

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Blueprint Reading - Steamfitters (TUESDAY)
2024-01-09 17:30 - 2024-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Advanced Pipe Trades Math (TUESDAY)
2024-01-09 17:30 - 2024-04-02 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

4th Year HVAC Service Related
2024-01-09 17:30 - 2024-03-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Davister

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Service Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Pipe Joining Applications (TUESDAY)
2024-01-09 17:30 - 2024-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Basic Service & Customer Relations
2024-01-09 17:30 - 2024-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: A. Koenigs & K. Bahr

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Pipe Trades Math for Steamfitters & Fabricators (TUESDAY)
2024-01-09 17:30 - 2024-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting January 9, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Barlow & A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

UA Local 400 Heritage (WEDNESDAY AFTERNOON)
2024-01-10 12:30 - 2024-04-03 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 10, 2024 from 12:30 p.m. to 3:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: M. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Welding (WEDNESDAY AFTERNOON)
2024-01-10 12:30 - 2024-03-13 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 10, 2024 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

UA Heritage
2024-01-10 17:30 - 2024-04-03 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: K. Rademaker & J. Beyer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Blueprint Reading - Fabricators
2024-01-10 17:30 - 2024-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: T. Lom

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

Blueprint Reading - Plumbers
2024-01-10 17:30 - 2024-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Isometric Drawing - Plumbers
2024-01-10 17:30 - 2024-02-28 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

Medical Gas Certification
2024-01-10 17:30 - 2024-03-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 4 Years of Piping Experience per NITC

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: D. Huth and R. Krause

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: A Medical Gas Installer certification candidate is a qualified individual who can demonstrate competence within their scope and will be proficient in and experienced in the installation of medical gas and vacuum systems covered by the ASSE Series 6000 Standard. Installers include anyone who works on or installs piping or components, including brazers. A qualified Medical Gas Installer may perform these tasks alone, or through the supervision of other individuals.

In addition to knowledge of product installation, a Medical Gas Installer is required to have a general knowledge of the applicable laws, codes, rules, listing agencies, and regulations from the federal, state, and local levels pertaining to medical gas and vacuum systems as well as knowledge of product performance, system and system component testing, documenting and recording, and medical gas terminology. Medical gas systems and equipment covered in the ASSE Series 6000 Standard include health care facilities within the scope of NFPA 99, Health Care Facilities Code. Medical gas piping systems include vacuum piping.

Welding (Wednesday in FDL)
2024-01-10 17:30 - 2024-03-13 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: FDL Weld Shop

Instructor: F. Rogan

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Welding (WEDNESDAY)
2024-01-10 17:30 - 2024-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

UA Heritage (Virtual from FDL)
2024-01-10 17:30 - 2024-04-03 20:30 | Fond du Lac Training Center, 460 W 11th St, Fond du Lac, WI, 54935, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 13 weeks

Location: Virtual from FDL Training Center

Instructor: K. Rademaker & J. Beyer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Basic Rigging - FIELD (WEDNESDAY)
2024-01-10 17:30 - 2024-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: A. Gussert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Advanced Pipe Trades Math (THURSDAY AFTERNOON)
2024-01-11 12:30 - 2024-04-04 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting January 11, 2024 from 12:30 p.m. to 3:30 p.m. for 13 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

4th Year Steamfitter Related (THURSDAY)
2024-01-11 17:30 - 2024-03-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 11, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: C. Markowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Basic Rigging - FIELD (THURSDAY)
2024-01-11 17:30 - 2024-03-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 11, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Welding (THURSDAY)
2024-01-11 17:30 - 2024-03-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting January 11, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

OSHA 30 Certification - Construction Safety
2024-01-11 17:30 - 2024-03-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 11, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Classroom

Instructor: B. Zaremba & M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Tube Bending (THURSDAY)
2024-01-11 17:30 - 2024-03-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 11, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Pipe Trades Math for Steamfitters & Fabricators (THURSDAY)
2024-01-11 17:30 - 2024-03-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Thursdays starting January 11, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Relay Logic & PLC
2024-01-11 17:30 - 2024-03-28 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 1st Year of Day School Complete

Day/Time: Thursdays starting January 11, 2024 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: D. Mercier, J. Benz & B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Soldering & Brazing (THURSDAY)
2024-01-11 17:30 - 2024-03-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 10, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

First Aid/CPR/AED Certification (MONDAY)
2024-01-15 17:30 - 2024-01-29 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 15, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2024-01-16 17:30 - 2024-01-30 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 16, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2024-02-12 17:30 - 2024-02-26 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting February 12, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2024-02-13 17:30 - 2024-02-27 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting February 13, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Digital Multimeter Basics ONLINE
2024-03-04 - 2024-05-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 4th through May 26th.

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Digital Multimeter Principles Book (Metal Trades Members owe a $50 deposit, deposit is returned to the Member upon book being returned in good condition)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Math (ONLINE)
2024-03-04 - 2024-05-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 4th through May 26th.

Location: Online, N/A

Instructor: S. Wenger and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer (ONLINE)
2024-03-04 - 2024-05-26
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting March 4th through May 26th.

Location: Online, N/A

Instructor: S. Wenger

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This is a state requirement. This course deals with gaining skills to become a jobsite trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the new Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to your trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History (ONLINE)
2024-03-04 - 2024-05-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 4th through May 26th.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day to day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop (ONLINE)
2024-03-04 - 2024-05-26
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 4th through May 26th.

Location: Online, N/A

Instructor: S. Wenger & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: This course aims to train members in the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

This is a required class PRIOR to starting Day School for Apprentices.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades Benefits Introduction (ONLINE)
2024-03-04 - 2024-05-26
Pre-Requisite:

Day/Time: Online, Self Paced, starting March 4th through May 26th.

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed: N/A

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Youth Apprentice Skills Workshop (Mondays)
2024-03-18 17:30 - 2024-04-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools

Day/Time: Mondays starting March 18, 2024 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: DJ Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Threading Pipe
Torching Metal
Soldering Copper
Welding
Safety

First Aid/CPR/AED Certification (TUESDAY)
2024-03-19 17:30 - 2024-04-02 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting March 19, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Service Solder, Braze & Welding
2024-04-01 17:30 - 2024-05-01 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 1, 2024 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: J. Hooyman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to setup the welding machine to make simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: this class will not teach the apprentice how to weld pipe. The learning units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper Operation of Torch and Welding Equipment

First Aid/CPR/AED Certification (MONDAY AFTERNOON)
2024-04-08 12:30 - 2024-04-22 16:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting April 8, 2024 from 12:30 p.m. to 4:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Welding (MONDAY and WEDNESDAY AFTERNOON)
2024-04-08 12:30 - 2024-05-08 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 8, 2024 from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Welding (MONDAY and WEDNESDAY)
2024-04-08 17:30 - 2024-05-08 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 8, 2024 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

First Aid/CPR/AED Certification (MONDAY)
2024-04-08 17:30 - 2024-04-22 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting April 8, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Rigging - SHOP (AFTERNOONS)
2024-04-09 12:30 - 2024-05-09 15:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 9th from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: D. Wampole

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Welding (TUESDAY and THURSDAY)
2024-04-09 17:30 - 2024-05-09 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays AND Thursdays starting April 9, 2024 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW - Pipe

Advanced Pipe Trades Math (TUESDAY and THURSDAY)
2024-04-09 17:30 - 2024-05-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays AND Thursdays starting April 9, 2024 from 5:30 p.m. to 8:30 p.m. for 5.5 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Backflow/Cross Connection Certification (WI & ASSE)
2024-04-09 17:30 - 2024-05-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 5 Years of Piping Experience (Doesn't necessarily need to be Union Piping Experience)

Day/Time: Tuesdays AND Thursdays starting April 9, 2024 from 5:30 p.m. to 8:30 p.m. for 6 ½ weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Emmer & C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed for plumbers and other related mechanical contractors. The course covers basic backflow hydraulics, cross-connection identification, degree of hazard, operation of backflow prevention assemblies, applications and basic installation requirements of backflow prevention assemblies. A hands-on workshop will allow students to practice test procedures on the reduced pressure principal assembly, double check valve assembly, and pressure vacuum breaker. ASSE certification in backflow prevention assembly testing, repairing, and surveying adds nationally recognized credentials to your resume, enhances your skills, and increases the number of tasks you can perform – ultimately raising your employability.

Basic Boilers & Burners
2024-04-09 17:30 - 2024-05-09 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting April 9, 2024 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Valence

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Pipe Joining Applications (Tuesday and Thursday)
2024-04-09 17:30 - 2024-05-09 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesday & Thursday starting April 9, 2024 from 5:30 p.m. to 8:30 p.m. for 5 weeks.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Service Pipe Math & Tube Bending
2024-04-09 17:30 - 2024-04-25 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 9, 2024 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

Advanced Rigging
2024-04-09 17:30 - 2024-05-23 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the Field, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging, Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 9, 2024 from 5:30 p.m. to 8:30 p.m. for 11 3-hour sessions.

You’ll have to be slightly flexible for the duration of the class as the instructors have a few Thursdays where they’re unable to teach, so we don’t have an end date determined.

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber & D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

First Aid/CPR/AED Certification (TUESDAY)
2024-04-09 17:30 - 2024-04-23 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting April 9, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

UA Heritage (Virtual from LU400 FDL Location)
2024-04-10 17:30 - 2024-06-19 20:30 | 460 West 11th Street, 460 West 11th Street, Fond du Lac, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting April 10, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Fond du Lac Training Center (Kaukauna on Union Meeting Nights)

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

UA Heritage
2024-04-10 17:30 - 2024-06-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting April 10, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitting Classroom or Main Meeting Hall (pending class size)

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Transit, Level & Laser
2024-04-10 17:30 - 2024-05-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting April 10, 2024 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: A. Wied

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

Orbital UA Welding Certification (MONDAY & WEDNESDAY)
2024-05-13 17:30 - 2024-05-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite: GTAW Cert.

Day/Time: Mondays AND Wednesdays starting May 13, 2024 through May 29, 2024 from 5:30 p.m. to 8:30 p.m. (May 27th - Memorial Day, No Class)

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: D. Klumpp

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Metal Trades 101: MT Advancement ONLINE
2024-06-03 - 2024-08-18
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting June 3rd through August 18th

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

Basic Math ONLINE
2024-06-03 - 2024-08-18
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 3, 2024 to August 18, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, deposit is returned to the Member upon book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Electricity ONLINE
2024-06-03 - 2024-08-18
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 3, 2024 to August 18, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Basic Electricity Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2024-06-03 - 2024-08-18
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting June 3, 2024 to August 18, 2024

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This course is required by the state of Wisconsin and deals with gaining skills to become a job site trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to their trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Digital Multimeter Basics ONLINE
2024-06-03 - 2024-08-18
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 3, 2024 to August 18, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Multimeter Textbook (Metal Trades Members owe a $50 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Use & Care of Tools/Local 400 Shop ONLINE
2024-06-03 - 2024-08-18
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 3, 2024 to August 18, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course aims to train members the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

OSHA 30 Certification (Construction Safety) ONLINE
2024-06-03 - 2024-08-18, 2024-09-04 - 2024-11-24, 2024-12-02 - 2025-02-23, 2025-03-03 - 2025-05-18
Pre-Requisite: N/A

Day/Time: Online, Self-Paced, Completion Required within 60 Days of Receiving the Code

Location: Online, N/A

Instructor: N/A, Third Party: Click Safety

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement, and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, and Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Union 101: UA & Labor History ONLINE
2024-06-03 - 2024-08-18
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 3, 2024 to August 18, 2024

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

First Aid/CPR/AED Certification
2024-06-04 17:30 - 2024-06-18 09:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting June 4, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Pipe Joining Applications TEST OUT (AFTERNOON)
2024-06-10 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive , Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 10, 2024 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending TEST OUT (AFTERNOON)
2024-06-10 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 10, 2024 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT (AFTERNOON)
2024-06-10 13:30 - 16:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 10, 2024 from 1:30 p.m. to 4:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Soldering and Brazing TEST OUT
2024-06-10 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 10, 2024 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Solder & Braze Room

Instructor: D. Julius & S. Wenger

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Tube Bending TEST OUT
2024-06-10 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 10, 2024 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, Tube Bending Room

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Math/Tube Bending Cards

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

Pipe Joining Applications TEST OUT
2024-06-10 16:30 - 19:30 | Kaukauna Training Center, 2700 Northridge Drive , Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday, June 10, 2024 from 4:30 p.m. to 7:30 p.m.

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: D. Julius

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: If you successfully pass the test, you will not need to take the entire class; however, you will NOT receive 30 hours of credit. You will only receive 3 hours of credit.

First Aid/CPR/AED Certification
2024-07-16 17:30 - 2024-07-30 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting July 16, 2024 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Pipe Trades Math for Steamfitters & Fabricators (Afternoon)
2024-08-19 12:30 - 2024-10-28 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Monday starting August 19, 2024 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: C. Robedeaux

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Advanced Pipe Trades Math (Monday)
2024-08-19 17:30 - 2024-11-04 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting August 19, 2024, from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: C. Roberts

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Industrial Rigging I (Advanced Rigging)
2024-08-19 17:30 - 2024-11-04 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the FIELD, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging for the FIELD, Basic Math Online

Day/Time: Mondays starting August 19, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber and D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

Basic Service & Customer Relations
2024-08-19 17:30 - 2024-10-28 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting August 19, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: K. Bahr & A. Kloehn

Course Materials Needed:

Pen
Notebook
Computer (Personal Device or LU400 Chromebook)
Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on learning the proper etiquette for interacting with outside customers as well as inside customers at your business. Including communication styles and ways to properly interact with co-workers, direct reports and managers. This will also help you gain confidence in interactions and methods of de-escalation during tough situations. You will also learn how to read body language and understand the different personality types of people you will comes across in the workforce.

DDC Controls/VFD’s
2024-08-19 17:30 - 2024-11-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Mondays starting August 19, 2024 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: C. Nackers, T. Grose and A. Torbeck

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Soldering & Brazing
2024-08-19 17:30 - 2024-11-04 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 19, 2024, from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Soldering and Brazing Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Mechanical Equipment Service (MES) (Tuesday)
2024-08-20 17:30 - 2024-10-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 20, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: B. Hagens

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Tube Bending (Tuesday)
2024-08-20 17:30 - 2024-10-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 20, 2024, from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Advanced Pipe Trades Math (Tuesday)
2024-08-20 17:30 - 2024-10-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting August 20, 2024 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Mechanical Equipment Service (MES) (Wednesday)
2024-08-21 17:30 - 2024-10-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting August 21, 2024, from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: B. Hagens

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

UA Local 400 Heritage
2024-08-21 17:30 - 2024-10-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 21, 2024, from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Main Meeting Hall

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Relay Logic & PLC
2024-08-22 17:30 - 2024-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Thursdays starting August 22, 2024, from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Benz & B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Metallurgy
2024-08-22 17:30 - 2024-10-24 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting August 22, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: N. Lintner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

Pipe Trades Math for Steamfitters & Fabricators (Tuesday)
2024-08-27 17:30 - 2024-10-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 27, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. Barlow and A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

OSHA 30 Certification (Construction Safety) (Tuesday)
2024-08-27 17:30 - 2024-10-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 27, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: N. Berger

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumbing Applications (Tuesday and Thursday)
2024-08-27 17:30 - 2024-10-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting August 27, 2024, from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Plumbing Classroom & Solder and Braze Lab

Instructor: T. Adams & N. Leiser

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Welding (Tuesday)
2024-08-27 17:30 - 2024-10-29 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting August 27, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Welding (Wednesday Afternoon)
2024-08-28 12:30 - 2024-10-30 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 28, 2024 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Basic Rigging for the Field (Wednesday)
2024-08-28 17:30 - 2024-10-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 28, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: A. Gussert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Blueprint Reading – Plumbers
2024-08-28 17:30 - 2024-10-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting August 28, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Welding (Wednesday)
2024-08-28 17:30 - 2024-10-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesday starting August 28, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Basic Rigging for the Shop
2024-08-28 17:30 - 2024-10-30 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 28, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: W. Kempka

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Metallurgy (Afternoon)
2024-08-29 12:30 - 2024-10-31 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting August 29, 2024, from 12:30 p.m. to 5:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: D. Wampole

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This class will provide you with a basic understanding of the properties of metals and their alloys as well as an introduction to the science of forming alloys. In addition, common manufacturing flaws and the modes of common failure of engineering alloys will be introduced, allowing you to identify processes and techniques that will help you improve your product quality and reliability. Demonstrations and real-world examples are used to amplify key points in the class.

Pipe Trades Math for Steamfitters & Fabricators (Thursday)
2024-08-29 17:30 - 2024-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Thursday starting August 29, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Welding (Thursday)
2024-08-29 17:30 - 2024-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting August 29, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

OSHA 30 Certification (Construction Safety) (Thursday)
2024-08-29 17:30 - 2024-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting August 29, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Basic Rigging for the Field (Thursday)
2024-08-29 17:30 - 2024-10-31 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting August 29, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Pipe Joining Applications (Tuesday)
2024-09-03 17:30 - 2024-11-05 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting September 3, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Blueprint Reading – Steamfitters
2024-09-03 17:30 - 2024-11-05 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting September 3, 2024, from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

First Aid/CPR/AED Certification
2024-09-03 17:30 - 2024-09-17 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting September 3, 2024, from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Transition to Trainer ONLINE
2024-09-04 - 2024-11-24
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting September 4, 2024 to November 24, 2024

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This course is required by the state of Wisconsin and deals with gaining skills to become a job site trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to their trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Math ONLINE
2024-09-04 - 2024-11-24
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 4, 2024 to November 24, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Digital Multimeter Basics ONLINE
2024-09-04 - 2024-11-24
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 4, 2024 to November 24, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Multimeter Book (Metal Trades Members owe a $50 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Basic Electricity ONLINE
2024-09-04 - 2024-11-24
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 4, 2024 to November 24, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Basic Electricity Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course covers basic electricity. The Learning Units include:

Electrical Safety
Fundamentals of Electricity
Producing Electricity
Magnetism and Electricity
Electromagnetism
Fundamentals of Electrical Circuits
Electric Power and Energy
Direct Current, Series, and Parallel Circuits
Compound Circuits
Conductors and Electrical Wiring Methods
Alternating Current
Inductance and Capacitance
Alternating–Current Systems
Motor Controls and Control Circuits
Alternating-Current Meters and Instruments

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop ONLINE
2024-09-04 - 2024-11-24
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 4, 2024 to November 24, 2024

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course aims to train members the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2024-09-04 - 2024-11-24
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 4, 2024 to November 24, 2024

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Metal Trades 101: MT Advancement ONLINE
2024-09-04 - 2024-11-24
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting September 4th through November 24th

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

First Aid/CPR/AED Certification
2024-09-23 17:30 - 2024-10-07 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting September 23, 2024, from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification
2024-10-14 17:30 - 2024-10-28 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting October 14, 2024, from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification
2024-10-15 17:30 - 2024-10-29 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting October 15, 2024, from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Math ONLINE
2024-12-02 - 2025-02-23
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 2, 2024 to February 23, 2025

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades 101: MT Advancement ONLINE
2024-12-02 - 2025-02-23
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting December 2th through February 23rd

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

Use & Care of Tools/Local 400 Shop ONLINE
2024-12-02 - 2025-02-23
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 2, 2024 to February 23, 2025

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course aims to train members the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Digital Multimeter Basics ONLINE
2024-12-02 - 2025-02-23
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 2, 2024 to February 23, 2025

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Multimeter Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Transition to Trainer ONLINE
2024-12-03 - 2025-02-23
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting December 3, 2024 to February 23, 2025

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This course is required by the state of Wisconsin and deals with gaining skills to become a job site trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to their trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2024-12-03 - 2025-02-23
Pre-Requisite:

Metal Trades, Training Contract Trainees and Apprentices: New Member Orientation Online
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 3, 2024 to February 23, 2025

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Blackboard.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Refrigeration/CFC Certification (Tuesday AND Thursday)
2024-12-03 17:30 - 2024-12-17 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting December 3, 2024, from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: T. Grossman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat Transfer
Temperature/Pressure Relationship
Safety

This course also prepares students to test for CFC Certification in Type 1 (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (encompasses Type I, II, & III).

First Aid/CPR/AED Certification (Tuesday and Thursday)
2024-12-03 17:30 - 2024-12-10 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays & Thursdays starting December 3, 2024, from 5:30 p.m. to 9:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Service Pipe Math & Tube Bending (Tuesday and Thursday)
2024-12-03 17:30 - 2024-12-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting December 3, 2024 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

First Aid/CPR/AED Certification (Wednesday-Monday-Wednesday Afternoon)
2024-12-04 12:30 - 2024-12-11 16:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays & Wednesdays starting December 4, 2024, from 12:30 p.m. to 4:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (Monday and Wednesday)
2024-12-04 17:30 - 2024-12-11 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays & Wednesdays starting December 4, 2024, from 5:30 p.m. to 9:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Youth Apprenticeship Skills Workshop (Tuesday and Thursday)
2024-12-05 17:30 - 2024-12-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools

Day/Time: Tuesdays AND Thursdays starting December 5, 2024 from 12:30 p.m. to 3:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: DJ Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Threading Pipe
Torching Metal
Tool & Material Identification
Soldering Copper
Welding
Safety

Blueprint Reading for Fabricators (Afternoon)
2025-01-06 12:30 - 2025-03-10 15:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 6, 2025 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Room

Instructor: D. Wampole

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

Welding (Monday)
2025-01-06 17:30 - 2025-03-10 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Soldering & Brazing (Monday)
2025-01-06 17:30 - 2025-03-17 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Soldering & Brazing Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Plumbing Service & Repair
2025-01-06 17:30 - 2025-04-14 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Grose, C. Boylan, and N. Grams

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will concentrate on hands-on skills training utilizing plumbing service mobile classroom training modules and appropriate tools and equipment. The course emphasizes the customer service and communication skills needed in the plumbing service industry. It will include material referencing plumbing service troubleshooting, repair installation, sales, business operations, vehicles and equipment, and company policies.

DDC Controls & VFD's
2025-01-06 17:30 - 2025-03-24 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: C. Nackers, A. Torbeck & T. Grose

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Blueprint Reading - Fabricators
2025-01-06 17:30 - 2025-03-10 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: Tony Lom

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning unites include:

Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Flow Diagrams
Piping Plans and Elevations
Piping Isometrics
Piping Spools

Basic Rigging for the Field (Monday)
2025-01-06 17:30 - 2025-03-10 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Industrial Rigging I & UA Crane Signal Certification (Advanced Rigging)
2025-01-06 17:30 - 2025-03-24 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the FIELD, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging for the FIELD, Basic Math Online

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber and D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

4th Year Steamfitter Related (Monday)
2025-01-06 17:30 - 2025-03-17 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 6, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. Joseph

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Welding (Tuesday)
2025-01-07 17:30 - 2025-03-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Tube Bending (Tuesday)
2025-01-07 17:30 - 2025-03-18 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Plumbing Applications
2025-01-07 17:30 - 2025-04-15 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, Plumbing Classroom & Solder and Braze Lab

Instructor: T. Adams, J. Parker and N. Leiser

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Pipe Trades Math for Steamfitters & Fabricators (Tuesday)
2025-01-07 17:30 - 2025-03-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. Barlow and A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (Tuesday)
2025-01-07 17:30 - 2025-03-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Blueprint Reading - Steamfitters (Tuesday)
2025-01-07 17:30 - 2025-03-11 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Advanced Pipe Trades Math (Tuesday)
2025-01-07 17:30 - 2025-03-18 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

4th Year HVAC Service Related
2025-01-07 17:30 - 2025-03-18 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 7, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: J. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Service Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Welding (Wednesday Afternoon)
2025-01-08 12:30 - 2025-03-12 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 8, 2025, from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

UA Heritage (Afternoon)
2025-01-08 12:30 - 2025-03-12 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 8, 2025 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: D. Wampole

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Welding (Wednesday)
2025-01-08 17:30 - 2025-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 8, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

UA Heritage
2025-01-08 17:30 - 2025-03-19 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 8, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Meeting Hall

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Isometric Drawing - Plumbers
2025-01-08 17:30 - 2025-02-26 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 8, 2025 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

Blueprint Reading - Plumbers
2025-01-08 17:30 - 2025-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 8, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Room

Instructor: C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Basic Rigging for the Field (Wednesday)
2025-01-08 17:30 - 2025-03-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 8, 2024 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: A. Gussert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Advanced Pipe Trades Math (Afternoon)
2025-01-09 12:30 - 2025-03-20 15:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting January 9, 2025 from 12:30 p.m. to 3:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Welding (Thursday)
2025-01-09 17:30 - 2025-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Tube Bending (Thursday)
2025-01-09 17:30 - 2025-03-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Soldering & Brazing (Thursday)
2025-01-09 17:30 - 2025-03-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Soldering & Brazing Lab

Instructor: J. Schmechel & C. Markowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Relay Logic & PLC's
2025-01-09 17:30 - 2025-03-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Benz and B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Pipe Trades Math for Steamfitters & Fabricators (Thursday)
2025-01-09 17:30 - 2025-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Basic Math Online

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

OSHA 30 Certification - Construction Safety
2025-01-09 17:30 - 2025-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Blueprint Reading - Steamfitters (Thursday)
2025-01-09 17:30 - 2025-03-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Room

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

4th Year Steamfitter Related (Thursday)
2025-01-09 17:30 - 2025-03-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Thursdays starting January 9, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

First Aid/CPR/AED Certification (Monday)
2025-01-13 17:30 - 2025-01-27 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting January 13, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (Tuesday)
2025-01-14 17:30 - 2025-01-28 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 14, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (Monday)
2025-02-10 17:30 - 2025-02-24 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting February 10, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (Tuesday)
2025-02-11 17:30 - 2025-02-25 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting February 11, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Math ONLINE
2025-03-03 - 2025-05-18
Pre-Requisite:

Metal Trades & MESTs: Metal Trades 101: MT Advancement Online
Youth Apprentices, Apprentices, Training Agreements, Journeymen: N/A

Day/Time: Online, Self Paced, starting March 3, 2025 to May 18, 2025

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2025-03-03 - 2025-05-18
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting March 3, 2025 to May 18, 2025

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This course is required by the state of Wisconsin and deals with gaining skills to become a job site trainer, role model, and perhaps a mentor to those who follow you. Most learning takes place through the daily interaction between an apprentice and his or her co-workers. By introducing the new Journeyworker to a new set of basic tools, the Journeyworker will seek out opportunities to actively improve apprenticeship training and to give back to their trade. The learning units include:

Making the Transition from Student to Teacher
Providing Orientation – Serving as a Mentor and Job Coach
Fostering a Positive Work Environment
Planning Hands-On Skill Training
Provide Feedback on Job Performance

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Union 101: UA & Labor History ONLINE
2025-03-03 - 2025-05-18
Pre-Requisite:

Metal Trades & MESTs: Metal Trades 101: MT Advancement Online
Youth Apprentices, Apprentices, Training Agreements, Journeymen: N/A

Day/Time: Online, Self Paced, starting March 3, 2025 to May 18, 2025

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description:

This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and Local 400.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Use & Care of Tools/Local 400 Shop ONLINE
2025-03-03 - 2025-05-18
Pre-Requisite:

Metal Trades & MESTs: Metal Trades 101: MT Advancement Online
Youth Apprentices, Apprentices, Training Agreements, Journeymen: N/A

Day/Time: Online, Self Paced, starting March 3, 2025 to May 18, 2025

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course aims to train members the proper use and care of hand tools, power tools, and Local 400 shop equipment as well as shop safety. The learning units include:

Proper Tool Use
Tool Care & Maintenance
Safety
Ladders & Scaffolding
Measurement and Layout Tools
Hand and Power Tools
Local 400 Shop Equipment (Use & Care)

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Metal Trades 101: MT Advancement ONLINE
2025-03-03 - 2025-05-18
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting March 3rd through May 18th

Location: Online, N/A

Instructor: Training Dept.

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

First Aid/CPR/AED Certification (Tuesday)
2025-03-18 17:30 - 2025-04-02 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting March 18, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Welding (Monday & Wednesday Afternoon)
2025-04-07 12:30 - 2025-05-07 15:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 7, 2025 from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Youth Apprentice Skills Workshop
2025-04-07 17:30 - 2025-04-21 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools

Day/Time: Mondays starting April 7, 2025 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, 2nd Floor Pipe Lab

Instructor: DJ Kloida

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Threading Pipe
Torching Metal
Tool & Material Identification
Soldering Copper
Welding
Safety

First Aid/CPR/AED Certification (Monday)
2025-04-07 17:30 - 2025-04-21 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays starting April 7, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Industrial Rigging II & Crane Signal Certification (EPRI Rigging)
2025-04-07 17:30 - 2025-05-12 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Industrial Rigging I, Basic Rigging for the FIELD, Pipe Trades Math for Steamfitters and Fabricators, Basic Math Online

Day/Time: Mondays starting April 7, 2025 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Red ITP Crane Book
Pipefitting Cards

Course Description: The objective of the United Association Industrial Rigging Certification Program is to provide highly qualified Industrial Riggers to fulfill the quality and workmanship requirements governing rigging activities. The training program consists of 60 to 80 hours of training, of which a minimum of 35% must be hands-on practical exercises. Copies of the Industrial Rigging Training Manual and IPT’s Crane and Rigging Handbook are available from the IPT Bookstore for individuals to use during the Industrial Rigging training programs.

Welding (Tuesday & Thursday)
2025-04-08 17:30 - 2025-05-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays AND Thursdays starting April 8, 2025 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Pipe Joining Applications (Tuesday & Thursday)
2025-04-08 17:30 - 2025-05-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 8, 2025 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: Tyler Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

First Aid/CPR/AED Certification (Tuesday)
2025-04-08 17:30 - 2025-04-22 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays starting April 8, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Construction Safety Room

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Boilers & Burners (Tuesday & Thursday)
2025-04-08 17:30 - 2025-05-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting April 8, 2025 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Valence

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Backflow/Cross Connection Certification (Tuesday & Thursday)
2025-04-08 17:30 - 2025-05-20 20:30 | Kaukauna Training Center, ,
Pre-Requisite: 5 Years of Piping Experience (Doesn't necessarily need to be Union Piping Experience)

Day/Time: Tuesdays AND Thursdays starting April 8, 2025 from 5:30 p.m. to 8:30 p.m. for 6 ½ weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Emmer, C. Cappaert, & J. VandeHey

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed for plumbers and other related mechanical contractors. The course covers basic backflow hydraulics, cross-connection identification, degree of hazard, operation of backflow prevention assemblies, applications and basic installation requirements of backflow prevention assemblies. A hands-on workshop will allow students to practice test procedures on the reduced pressure principal assembly, double check valve assembly, and pressure vacuum breaker. ASSE certification in backflow prevention assembly testing, repairing, and surveying adds nationally recognized credentials to your resume, enhances your skills, and increases the number of tasks you can perform – ultimately raising your employability.

Advanced Pipe Trades Math (Tuesday & Thursday)
2025-04-08 17:30 - 2025-05-13 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays AND Thursdays starting April 8, 2025 from 5:30 p.m. to 8:30 p.m. for 5.5 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Basic Rigging for the Field (Tuesday AND Thursday)
2025-04-08 17:30 - 2025-05-08 20:30 | Kaukauna Training Center, ,
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 8th from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Blueprint Reading Room

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

UA Heritage
2025-04-09 17:30 - 2025-06-18 20:30 | Kaukauna Training Center, ,
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting April 9, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Transit, Level & Laser
2025-04-30 17:30 - 2025-06-04 20:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Wednesdays starting April 30, 2025 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Everard/J. Parker

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

Orbital Welding (Monday and Wednesday)
2025-05-12 17:30 - 2025-05-28 20:30 | Kaukauna Training Center, ,
Pre-Requisite: GTAW Cert.

Day/Time: Mondays AND Wednesdays starting May 12th from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: Various

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Basic Math ONLINE
2025-06-02 - 2025-08-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 2, 2025 through August 17, 2025

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades 101: MT Advancement ONLINE
2025-06-02 - 2025-08-17
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting June 2, 2025 through August 17, 2025

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

OSHA 30 Certification (Construction Safety) ONLINE
2025-06-02 - 2025-08-17, 2025-09-01 - 2025-11-16, 2025-12-01 - 2026-02-22, 2026-03-09 - 2026-05-17
Pre-Requisite: N/A

Day/Time: Online, Self-Paced, Completion Required within 60 Days of Receiving the Code

Location: Online, N/A

Instructor: N/A, Third Party: Click Safety

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement, and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, and Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise per JAC rules and regulations.

Transition to Trainer ONLINE
2025-06-02 - 2025-08-07
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting June 2, 2025 through August 17, 2025.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This state-required course in Wisconsin equips journey workers with the essential skills to become effective job site trainers, role models, and mentors. Since most apprenticeship learning happens through daily interactions with experienced professionals, this course empowers journey workers to actively enhance apprenticeship training and contribute to their trade.

Through this training, you will gain practical tools to:

Transition from worker to trainer
Provide effective orientation and mentorship
Foster a positive and productive work environment
Plan and deliver hands-on skill training
Give constructive feedback on job performance

This self-paced course is delivered online through Canvas. Once the course is open, you will receive an email with access details. Mid-semester enrollment is available, but completion by the deadline is required for credit. Failure to complete the course in full will result in restarting from the beginning.

Union 101: UA & Labor History ONLINE
2025-06-02 - 2025-08-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 2, 2025 through August 17, 2025.

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides a comprehensive overview of the history of the United Association, emphasizing how past experiences have shaped and strengthened the organization. Participants will also gain insight into the daily operations of Local 400 and its working relationships with signatory contractors.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Use & Care of Tools ONLINE
2025-06-02 - 2025-08-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 2, 2025 through August 17, 2025.

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides hands-on training in the proper use, maintenance, and safety of hand tools, power tools, and Local 400 shop equipment. Participants will develop essential skills to ensure efficiency, accuracy, and workplace safety. Key topics covered include:

Proper Tool Use
Tool Care & Maintenance
Safety Protocols
Ladders & Scaffolding Best Practices
Measurement and Layout Tools
Hand and Power Tools Operation
Local 400 Shop Equipment: Use & Maintenance

This course is designed to enhance proficiency and promote a safe working environment for all members.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Computers ONLINE
2025-06-02 - 2025-08-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices, Journeyworkers: N/A

Day/Time: Online, Self Paced, starting June 2, 2025 to August 17, 2026.

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

PERSONAL, reliable computer with Microsoft Word, Excel, and PowerPoint capabilities (LU400 does not provide)

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.

All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.

This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

First Aid/CPR/AED Certification
2025-06-03 17:30 - 2025-06-17 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting June 3, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification
2025-07-15 17:30 - 2025-07-29 20:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting July 15, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Pipe Joining Applications (AFTERNOONS)
2025-08-18 12:30 - 2025-10-27 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 18, 2025 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Welding (MONDAY)
2025-08-18 17:30 - 2025-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting August 18, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Industrial Rigging I (with UA Crane Signal Certification-optional) (Advanced Rigging)
2025-08-18 17:30 - 2025-11-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the FIELD, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging for the FIELD, Basic Math Online

Day/Time: Mondays starting August 18, 2025 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber & J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

Pipe Trades Math for Fitters & Fabricators (MONDAY)
2025-08-18 17:30 - 2025-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Mondays starting August 18, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Advanced Pipe Trades Math (MONDAY)
2025-08-18 17:30 - 2025-11-03 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting August 18, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Basic Service & Customer Relations
2025-08-18 17:30 - 2025-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting August 18, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: K. Bahr & A. Kloehn

Course Materials Needed:

Pen
Notebook
Computer (Personal Device or LU400 Chromebook)
Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on learning the proper etiquette for interacting with outside customers as well as inside customers at your business. Including communication styles and ways to properly interact with co-workers, direct reports and managers. This will also help you gain confidence in interactions and methods of de-escalation during tough situations. You will also learn how to read body language and understand the different personality types of people you will comes across in the workforce.

Soldering & Brazing
2025-08-18 17:30 - 2025-11-03 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 18, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Soldering & Brazing Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

DDC Controls & VFD's
2025-08-18 17:30 - 2025-11-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Mondays starting August 18, 2025 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: C. Nackers/A. Torbeck/T. Grose

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Mechanical Equipment Service (MES)
2025-08-19 17:30 - 2025-11-04 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 4th Year Apprentice minimum

Day/Time: Tuesdays starting August 19, 2025 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: B. Hagens and J. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Tube Bending (TUESDAY)
2025-08-19 17:30 - 2025-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 19, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Advanced Pipe Trades Math (TUESDAY)
2025-08-19 17:30 - 2025-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting August 19, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

UA Heritage
2025-08-20 17:30 - 2025-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 20, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Main Meeting Hall

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Relay Logic & PLC's
2025-08-21 17:30 - 2025-10-30 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Thursdays starting August 21st, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Benz & B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Tube Bending (THURSDAY)
2025-08-21 17:30 - 2025-10-30 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting August 21, 2025 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Isometric Drawing - Plumbers
2025-08-25 17:30 - 2025-10-13 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting August 25, 2025 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

Basic Rigging for the SHOP (AFTERNOONS)
2025-08-26 12:30 - 2025-10-28 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 26, 2025 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: D. Wampole

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices in a shop environment. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Welding (TUESDAY)
2025-08-26 17:30 - 2025-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting August 26, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Pipe Joining Applications
2025-08-26 17:30 - 2025-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 26, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman & M. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Pipe Trades Math for Fitters & Fabricators (TUESDAY)
2025-08-26 17:30 - 2025-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 26, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. Barlow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

First Aid CPR/AED Certification (TUESDAY)
2025-08-26 17:30 - 2025-09-09 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 26, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Burners and Boilers
2025-08-26 17:30 - 2025-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesday nights starting August 26, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: E. Beulen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Plumbing Applications (TUESDAYS AND THURSDAYS)
2025-08-26 17:30 - 2025-10-14 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting August 26, 2025 from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Sprinkler Fitter Classroom and Solder & Braze Lab

Instructor: T. Adams/N. Leiser/J. Parker

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Welding (AFTERNOONS)
2025-08-27 12:30 - 2025-10-29 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 27, 2025 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Welding (WEDNESDAY)
2025-08-27 17:30 - 2025-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 27, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Basic Rigging for the FIELD (WEDNESDAY)
2025-08-27 17:30 - 2025-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 27, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: A. Gussert & D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Basic Rigging for the SHOP (Fabricators)
2025-08-27 17:30 - 2025-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Pipe Trades Math, Basic Math Online

Day/Time: Wednesdays starting August 27, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: T. Hidde

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices in a shop environment. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Blueprint Reading - Plumbers
2025-08-27 17:30 - 2025-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting August 27, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Metallurgy (AFTERNOONS)
2025-08-28 12:30 - 2025-10-30 15:30 | Kaukauna Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 28, 2025 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: D. Wampole

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course offers a foundational understanding of the properties of metals and their alloys, as well as an introduction to alloy formation principles. Students will explore common manufacturing defects and failure mechanisms in engineering alloys, equipping them with the knowledge to enhance product quality and reliability. Key concepts will be reinforced through demonstrations and real-world case studies, providing practical insights into metallurgical processes and applications.

OSHA 30 Certification (Construction Safety) (THURSDAY)
2025-08-28 17:30 - 2025-10-30 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 28, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Main Meeting Hall

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Financial Literacy
2025-08-28 17:30 - 2025-10-30 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 3rd Year Apprentice or above

Day/Time: Thursdays starting August 28, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Calculator

Course Description: This class is an instructor-led curriculum designed to equip UA400 members with the essential knowledge and practical skills needed to manage their personal finances confidently and effectively. Through engaging lessons, skill-building activities, and access to valuable resources, participants will learn how to make informed financial decisions and develop healthy money habits.

This course covers a range of financial topics tailored to support everyday needs, including budgeting, saving, understanding credit, managing debt, and planning for the future.

Please note: The instructor is not a financial advisor and will not provide personal financial advice. Instead, the instruction is focused on delivering unbiased, relevant, and accurate financial education to empower members to take control of their financial well-being.

The learning units include:

Your Money Values and Influences
You Can Bank On It
Your Income and Expenses
Your Spending and Saving Plan
Your Savings
Credit Reports and Scores
Borrowing Basics
Managing Debt
Using Credit Cards
Building your Financial Future
Protecting you Identity and Other Assets
Making Housing Decisions
Buying a Home
Disasters – Financial Preparation and Recovery

Metallurgy
2025-08-28 17:30 - 2025-10-30 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 28, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course offers a foundational understanding of the properties of metals and their alloys, as well as an introduction to alloy formation principles. Students will explore common manufacturing defects and failure mechanisms in engineering alloys, equipping them with the knowledge to enhance product quality and reliability. Key concepts will be reinforced through demonstrations and real-world case studies, providing practical insights into metallurgical processes and applications.

Pipe Trades Math for Fitters & Fabricators (THURSDAY)
2025-08-28 17:30 - 2025-10-30 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Thursdays starting August 28, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Welding (THURSDAY)
2025-08-28 17:30 - 2025-10-30 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting August 28, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Basic Math ONLINE
2025-09-01 - 2025-11-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 1, 2025 through November 16, 2025.

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades 101: MT Advancement ONLINE
2025-09-02 - 2025-11-16
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting September 2, 2025 through November 16, 2025.

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2025-09-02 - 2025-11-16
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting September 2, 2025 through November 16, 2025.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This state-required course in Wisconsin equips journey workers with the essential skills to become effective job site trainers, role models, and mentors. Since most apprenticeship learning happens through daily interactions with experienced professionals, this course empowers journey workers to actively enhance apprenticeship training and contribute to their trade.

Through this training, you will gain practical tools to:

Transition from worker to trainer
Provide effective orientation and mentorship
Foster a positive and productive work environment
Plan and deliver hands-on skill training
Give constructive feedback on job performance

This self-paced course is delivered online through Canvas. Once the course is open, you will receive an email with access details. Mid-semester enrollment is available, but completion by the deadline is required for credit. Failure to complete the course in full will result in restarting from the beginning.

Union 101: UA & Labor History ONLINE
2025-09-02 - 2025-11-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 2, 2025 through November 16, 2025.

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides a comprehensive overview of the history of the United Association, emphasizing how past experiences have shaped and strengthened the organization. Participants will also gain insight into the daily operations of Local 400 and its working relationships with signatory contractors.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Use & Care of Tools ONLINE
2025-09-02 - 2025-11-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 2, 2025 through November 16, 2025.

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides hands-on training in the proper use, maintenance, and safety of hand tools, power tools, and Local 400 shop equipment. Participants will develop essential skills to ensure efficiency, accuracy, and workplace safety. Key topics covered include:

Proper Tool Use
Tool Care & Maintenance
Safety Protocols
Ladders & Scaffolding Best Practices
Measurement and Layout Tools
Hand and Power Tools Operation
Local 400 Shop Equipment: Use & Maintenance

This course is designed to enhance proficiency and promote a safe working environment for all members.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Computers ONLINE
2025-09-02 - 2025-11-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices, Journeyworkers: N/A

Day/Time: Online, Self Paced, starting September 2, 2025 to November 16, 2025.

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

PERSONAL, reliable computer with Microsoft Word, Excel, and PowerPoint capabilities (LU400 does not provide)

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.

All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.

This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

Blueprint Reading - Steamfitters
2025-09-02 17:30 - 2025-11-04 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting September 2, 2025 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

First Aid/CPR/AED Certification (MONDAY)
2025-09-08 17:30 - 2025-09-22 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting September 8, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2025-09-23 17:30 - 2025-10-07 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting September 23, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (MONDAY)
2025-10-06 17:30 - 2025-10-20 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting October 6, 2025 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Orbital Welding Certification (AFTERNOONS)
2025-11-10 12:30 - 2025-12-08 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: GTAW Cert.

Day/Time: Mondays starting November 10th from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: Various

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Basic Math ONLINE
2025-12-01 - 2026-02-22
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 1, 2025 through February 22, 2026.

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Computers ONLINE
2025-12-01 - 2026-02-22
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices, Journeyworkers: N/A

Day/Time: Online, Self Paced, starting December 1, 2025 to February 22, 2026.

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

PERSONAL, reliable computer with Microsoft Word, Excel, and PowerPoint capabilities (LU400 does not provide)

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.

All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.

This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

Metal Trades 101: MT Advancement ONLINE
2025-12-01 - 2026-02-22
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting December 1, 2025 through February 22, 2026.

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2025-12-01 - 2026-02-22
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting December 1, 2025 through February 22, 2026.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This state-required course in Wisconsin equips journey workers with the essential skills to become effective job site trainers, role models, and mentors. Since most apprenticeship learning happens through daily interactions with experienced professionals, this course empowers journey workers to actively enhance apprenticeship training and contribute to their trade.

Through this training, you will gain practical tools to:

Transition from worker to trainer
Provide effective orientation and mentorship
Foster a positive and productive work environment
Plan and deliver hands-on skill training
Give constructive feedback on job performance

This self-paced course is delivered online through Canvas. Once the course is open, you will receive an email with access details. Mid-semester enrollment is available, but completion by the deadline is required for credit. Failure to complete the course in full will result in restarting from the beginning.

Union 101: UA & Labor History ONLINE
2025-12-01 - 2026-02-22
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 1, 2025 through February 22, 2026.

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides a comprehensive overview of the history of the United Association, emphasizing how past experiences have shaped and strengthened the organization. Participants will also gain insight into the daily operations of Local 400 and its working relationships with signatory contractors.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Use & Care of Tools ONLINE
2025-12-01 - 2026-02-22
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting December 1, 2025 through February 22, 2026.

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides hands-on training in the proper use, maintenance, and safety of hand tools, power tools, and Local 400 shop equipment. Participants will develop essential skills to ensure efficiency, accuracy, and workplace safety. Key topics covered include:

Proper Tool Use
Tool Care & Maintenance
Safety Protocols
Ladders & Scaffolding Best Practices
Measurement and Layout Tools
Hand and Power Tools Operation
Local 400 Shop Equipment: Use & Maintenance

This course is designed to enhance proficiency and promote a safe working environment for all members.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Orbital Welding Certification (MONDAY AND WEDNESDAY)
2025-12-01 17:30 - 2025-12-15 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: GTAW Cert.

Day/Time: Mondays AND Wednesdays starting December 1, 2025 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: Various

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Basic Refrigeration & CFC Certification (TUESDAY AND THURSDAY)
2025-12-02 17:30 - 2025-12-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting December 2, 2025 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: T. Grossman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat Transfer
Temperature/Pressure Relationship
Safety

This course also prepares students to test for CFC Certification in Type 1 (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (encompasses Type I, II, & III).

Service Pipe Math & Tube Bending (TUESDAY AND THURSDAY)
2025-12-02 17:30 - 2025-12-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting December 2, 2025 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

First Aid/CPR/AED Certification (MONDAY AND WEDNESDAY)
2025-12-08 17:30 - 2025-12-15 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting December 8, 2025 from 5:30 p.m. to 9:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, Safety Room

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Blueprint Reading - Fabricators (AFTERNOONS)
2026-01-05 12:30 - 2026-03-09 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 5, 2026 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: D. Wampole

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning units include:

Welding Symbols
Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Orthographic Drawings
Piping Plans and Elevations
Piping Isometrics
Spool Drawings

Advanced Pipe Math (MONDAY)
2026-01-05 17:30 - 2026-03-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: K. Wagner

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Blueprint Reading - Fabricators
2026-01-05 17:30 - 2026-03-09 08:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning units include:

Welding Symbols
Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Orthographic Drawings
Piping Plans and Elevations
Piping Isometrics
Spool Drawings

DDC Controls/VFD's
2026-01-05 17:30 - 2026-03-23 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Mondays starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: C. Nackers and A. Torbeck

Course Materials Needed:530p

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

First Aid/CPR/AED Certification (MONDAY)
2026-01-05 17:30 - 2026-01-19 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 5, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Rigging for the FIELD (MONDAY)
2026-01-05 17:30 - 2026-03-09 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Monday starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

4th Year Steamfitter Related (MONDAY)
2026-01-05 17:30 - 2026-03-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. Smet

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Welding (MONDAY)
2026-01-05 17:30 - 2026-03-09 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Soldering & Brazing (MONDAY)
2026-01-05 17:30 - 2026-03-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Plumbing Service & Repair
2026-01-05 17:30 - 2026-04-13 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 5, 2026 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: C. Boylan/J. Vandehey

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will concentrate on hands-on skills training utilizing plumbing service mobile classroom training modules and appropriate tools and equipment. The course emphasizes the customer service and communication skills needed in the plumbing service industry. It will include material referencing plumbing service troubleshooting, repair installation, sales, business operations, vehicles and equipment, and company policies.

Blueprint Reading - Steamfitters (TUESDAY)
2026-01-06 17:30 - 2026-03-10 08:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Advanced Pipe Math (TUESDAY)
2026-01-06 17:30 - 2026-03-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer/J. Walls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

4th Year HVAC Service Related
2026-01-06 17:30 - 2026-03-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Service Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

First Aid/CPR/AED Certification (TUESDAY)
2026-01-06 17:30 - 2026-01-20 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Pipe Joining Applications (TUESDAY)
2026-01-06 17:30 - 2026-03-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

OSHA 30 Construction Certification (TUESDAY)
2026-01-06 17:30 - 2026-03-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: N. Berger

Course Materials Needed: N/A

Course Description: The learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement and Safety Management Programs
Fall Protection
Scaffolds
Stairway and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical (NFPA 70E and Lockout Tagout)
Welding & Cutting
Power Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, ad Barricades
Safety & Health Programs

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Welding (TUESDAY)
2026-01-06 17:30 - 2026-03-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Tube Bending (TUESDAY)
2026-01-06 17:30 - 2026-03-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Plumbing Applications
2026-01-06 17:30 - 2026-04-14 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, Sprinkler Fitter Classroom & 2nd Floor Plumbing Lab

Instructor: T. Adams/J. Parker/N. Leiser

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Pipe Trades Math for Steamfitters & Fabricators (TUESDAY)
2026-01-06 17:30 - 2026-03-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting January 6, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. Barlow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Welding (WEDNESDAY AFTERNOONS)
2026-01-07 12:30 - 2026-03-11 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 7, 2026 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Welding (WEDNESDAY)
2026-01-07 17:30 - 2026-03-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 7, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

UA Local 400 Heritage
2026-01-07 17:30 - 2026-03-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 7, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Main Meeting Hall

Instructor: J. Schmechel & L. LaPerrierre

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Medical Gas Installer Certification
2026-01-07 17:30 - 2026-03-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Soldering and Brazing, plus 4 Years of Piping Experience per NITC

Day/Time: Wednesdays starting January 7, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab/Solder & Braze Lab

Instructor: D. Huth and R. Krause

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: A Medical Gas Installer certification candidate is a qualified individual who can demonstrate competence within their scope and will be proficient in and experienced in the installation of medical gas and vacuum systems covered by the ASSE Series 6000 Standard. Installers include anyone who works on or installs piping or components, including brazers. A qualified Medical Gas Installer may perform these tasks alone, or through the supervision of other individuals.

In addition to knowledge of product installation, a Medical Gas Installer is required to have a general knowledge of the applicable laws, codes, rules, listing agencies, and regulations from the federal, state, and local levels pertaining to medical gas and vacuum systems as well as knowledge of product performance, system and system component testing, documenting and recording, and medical gas terminology. Medical gas systems and equipment covered in the ASSE Series 6000 Standard include health care facilities within the scope of NFPA 99, Health Care Facilities Code. Medical gas piping systems include vacuum piping.

Isometric Drawing - Plumbers
2026-01-07 17:30 - 2026-02-25 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 7, 2026 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

Industrial Rigging I (with UA Crane Signal Certification) (Advanced Rigging)
2026-01-07 17:30 - 2026-03-25 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the FIELD, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging for the FIELD, Basic Math Online

Day/Time: Wednesdays starting January 7, 2026 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber/J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to build upon the Apprentice’s basic rigging knowledge and safety while considering moving large, heavy loads associated with today’s manufacturing and construction industries. The learning units include:

Basic Rigging Review
Non-Symmetrical Loads
Chain-Fall/High Line
Sling Angle Formulas
Determining Rigging Load Weights

Industrial Rigging II & Crane Signal Certification (EPRI Rigging)

Pre-Requisite: Industrial Rigging I Rigging, Basic Rigging for the FIELD, Pipe Trades Math for Steamfitters and Fabricators, Basic Math Online

Day/Time: Tuesdays starting April 20, 2021 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Room TBD

Instructor: S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Red ITP Crane Book
Pipefitting Cards

Course Description: The objective of the United Association Industrial Rigging Certification Program is to provide highly qualified Industrial Riggers to fulfill the quality and workmanship requirements governing rigging activities. The training program consists of 60 to 80 hours of training, of which a minimum of 35% must be hands-on practical exercises. Copies of the Industrial Rigging Training Manual and IPT’s Crane and Rigging Handbook are available from the IPT Bookstore for individuals to use during the Industrial Rigging training programs.

Basic Rigging for the FIELD (WEDNESDAY)
2026-01-07 17:30 - 2026-03-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesday starting January 7, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: A. Gussert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Advanced Pipe Trades Math (AFTERNOONS)
2026-01-08 12:30 - 2026-03-19 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting January 8, 2026 from 12:30 p.m. to 3:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Welding (THURSDAY)
2026-01-08 17:30 - 2026-03-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Tube Bending (THURSDAY)
2026-01-08 17:30 - 2026-03-19 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Soldering & Brazing (THURSDAY)
2026-01-08 17:30 - 2026-03-19 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: C. Markowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Relay Logic & PLC
2026-01-08 17:30 - 2026-03-19 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Thursdays starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Lab

Instructor: J. Benz/B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Pipe Trades Math for Steamfitters & Fabricators (THURSDAY)
2026-01-08 17:30 - 2026-03-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Thursday starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (THURSDAY)
2026-01-08 17:30 - 2026-03-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: M. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

Financial Literacy
2026-01-08 17:30 - 2026-03-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 3rd Year Apprentice or above

Day/Time: Thursdays starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Calculator

Course Description: This class is an instructor-led curriculum designed to equip UA400 members with the essential knowledge and practical skills needed to manage their personal finances confidently and effectively. Through engaging lessons, skill-building activities, and access to valuable resources, participants will learn how to make informed financial decisions and develop healthy money habits.

This course covers a range of financial topics tailored to support everyday needs, including budgeting, saving, understanding credit, managing debt, and planning for the future.

Please note: The instructor is not a financial advisor and will not provide personal financial advice. Instead, the instruction is focused on delivering unbiased, relevant, and accurate financial education to empower members to take control of their financial well-being.

The learning units include:

Advantages of Utilizing Banks
Basics of Banking
Track you Spending
Setting Goals
Implementing a Budget
Debt Management
Understanding Credit
Being a Smart Consumer
Being Prepared for the Unknown
Protecting you Identity and Other Assets
Retirement Planning
Disasters – Financial Preparation and Recovery

Blueprint Reading - Steamfitters (THURSDAY)
2026-01-08 17:30 - 2026-03-12 08:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

4th Year Steamfitter Related (THURSDAY)
2026-01-08 17:30 - 2026-03-19 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursday starting January 8, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: J. Smet

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Blueprint Reading - Plumbers
2026-01-21 17:30 - 2026-03-25 08:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 21, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

First Aid/CPR/AED Certification (MONDAY)
2026-02-02 17:30 - 2026-02-16 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting February 2, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2026-02-03 17:30 - 2026-02-17 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting February 3, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (TUESDAY)
2026-03-03 17:30 - 2026-03-17 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting March 3, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Math ONLINE
2026-03-09 - 2026-05-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 9, 2026 through May 17, 2026.

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: The learning units include:

Whole Numbers
Simple & Complex Fractions
Decimals
Percentages
Exponents
Ratios
Proportions
Plane & Solid Figures

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Metal Trades 101: MT Advancement ONLINE
2026-03-09 - 2026-05-17
Pre-Requisite:

N/A

Day/Time: Online, Self Paced, starting March 9, 2026 through May 17, 2026.

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

None

Course Description: The Metal Trades 101 course offers a comprehensive exploration of the benefits available through union membership, covering healthcare, retirement plans, out of work list, and free training opportunities. Developed by industry experts, participants gain insights into health fund options, retirement plans, and job security provisions, empowering them to make informed decisions about their union benefits. By the end of the course, attendees emerge equipped with the knowledge and tools to maximize their membership, navigate workplace challenges, and leverage free training resources for long-term success in the pipe trades industry.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Transition to Trainer ONLINE
2026-03-09 - 2026-05-17
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Online, Self Paced, starting March 9, 2026 through May 17, 2026.

Location: Online, N/A

Instructor: S. Krejcarek

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This state-required course in Wisconsin equips journey workers with the essential skills to become effective job site trainers, role models, and mentors. Since most apprenticeship learning happens through daily interactions with experienced professionals, this course empowers journey workers to actively enhance apprenticeship training and contribute to their trade.

Through this training, you will gain practical tools to:

Transition from worker to trainer
Provide effective orientation and mentorship
Foster a positive and productive work environment
Plan and deliver hands-on skill training
Give constructive feedback on job performance

This self-paced course is delivered online through Canvas. Once the course is open, you will receive an email with access details. Mid-semester enrollment is available, but completion by the deadline is required for credit. Failure to complete the course in full will result in restarting from the beginning.

Union 101: UA & Labor History ONLINE
2026-03-09 - 2026-05-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 9, 2026 through May 17, 2026.

Location: Online, N/A

Instructor: B. Meyerhofer

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides a comprehensive overview of the history of the United Association, emphasizing how past experiences have shaped and strengthened the organization. Participants will also gain insight into the daily operations of Local 400 and its working relationships with signatory contractors.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Use & Care of Tools ONLINE
2026-03-09 - 2026-05-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 9, 2026 through May 17, 2026.

Location: Online, N/A

Instructor: S. Krejcarek & A. Thompson

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides hands-on training in the proper use, maintenance, and safety of hand tools, power tools, and Local 400 shop equipment. Participants will develop essential skills to ensure efficiency, accuracy, and workplace safety. Key topics covered include:

Proper Tool Use
Tool Care & Maintenance
Safety Protocols
Ladders & Scaffolding Best Practices
Measurement and Layout Tools
Hand and Power Tools Operation
Local 400 Shop Equipment: Use & Maintenance

This course is designed to enhance proficiency and promote a safe working environment for all members.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Computers ONLINE
2026-03-09 - 2026-05-17
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices, Journeyworkers: N/A

Day/Time: Online, Self Paced, starting March 9, 2026 to May 17, 2026.

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed:

PERSONAL, reliable computer with Microsoft Word, Excel, and PowerPoint capabilities (LU400 does not provide)

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.

All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.

This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

Industrial Rigging I (with UA Crane Signal Certification) (Advanced Rigging)
2026-03-25 17:30 - 2026-06-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the FIELD, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging for the FIELD, Basic Math Online

Day/Time: Wednesdays starting March 25, 2026 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to expand upon the foundational rigging knowledge acquired during the apprenticeship program, with a strong emphasis on advanced safety practices and the strategic movement of large, complex, or irregular loads. As heavy lifting and load handling play a critical role in both modern manufacturing and construction environments, this training ensures participants are well-prepared to plan and execute safe, efficient rigging operations in a variety of real-world scenarios.

Participants will engage with both classroom instruction and practical applications focused on the technical, mathematical, and mechanical considerations of advanced rigging. Emphasis is placed on understanding rigging plans, calculating load weights, using proper lifting angles, and managing non-symmetrical and shifting loads with precision and confidence.

Key Learning Units Include:

Review of Basic Rigging Principles and Terminology
Identification and Management of Non-Symmetrical and Irregular Loads
Chain-Fall Systems and High-Line Applications
Sling Angle Calculations and Their Effect on Load Tension
Determining Total Rigging Load Weights and Center of Gravity
Load Path Planning and Risk Mitigation
Communication and Signal Person Best Practices

This course prepares journey-level workers and advanced apprentices for the increased responsibilities and challenges associated with critical lifts, helping to ensure safe operations on job sites where heavy rigging is required. Students will also take the UA Crane Signalperson Practical and Written Exams as a part of the class.

Welding (MONDAY and WEDNESDAY AFTERNOONS)
2026-04-06 12:30 - 2026-05-06 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Monday and Wednesday Afternoons starting April 6, 2026 from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Welding (MONDAY & WEDNESDAY)
2026-04-06 17:30 - 2026-05-06 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 6, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Shop Foreman (MONDAY & WEDNESDAY)
2026-04-06 17:30 - 2026-05-06 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 3rd Year Apprentice and Above

Day/Time: Mondays AND Wednesdays starting April 6, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This 30-hour comprehensive training program is designed for current and aspiring fabrication shop foremen seeking to develop the leadership, technical, and organizational skills essential to successfully manage shop operations. Participants will gain a deep understanding of shop safety, workflow coordination, quality control, personnel supervision, and effective communication.

Course Topics Include:

Foreman roles and responsibilities
OSHA safety standards and best practices
Job planning
Material handling and inventory control
Public Speaking
Team leadership and conflict resolution
Scheduling, productivity tracking, and lean practices

Who Should Attend:
This course is ideal for experienced fabricators, lead hands, or newly promoted foremen who want to enhance their capabilities and advance their careers in a fabrication shop environment.

Learning Outcomes:
By the end of the course, participants will be equipped to:

Lead and manage shop crews effectively
Ensure compliance with safety and quality standards
Coordinate shop resources for maximum efficiency
Communicate clearly with internal and external stakeholders
Solve day-to-day operational challenges with confidence

This class will include guest speakers, interactive classroom sessions, real-world case studies, group discussions, and practical exercises.

Service Solder, Braze & Welding (MONDAY & WEDNESDAY)
2026-04-06 17:30 - 2026-05-06 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 6, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: B. Schampers & T. Wunder

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to setup the welding machine to make simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems. Please note: this class will not teach the apprentice how to weld pipe. The learning units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper Operation of Torch and Welding Equipment

First Aid/CPR/AED Certification (MONDAY)
2026-04-06 17:30 - 2026-04-20 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Monday's starting April 6, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Welding (TUESDAY & THURSDAY)
2026-04-07 17:30 - 2026-05-07 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays AND Thursdays starting April 7, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe53

Service Pipe Math & Tube Bending (TUESDAY & THURSDAY)
2026-04-07 17:30 - 2026-04-23 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 7, 2026 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Tube Bending Room

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

Pipe Joining Applications (TUESDAY & THURSDAY)
2026-04-07 17:30 - 2026-05-07 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays and Thursdays starting April 7, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: Tyler Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

Safety
Carbon Threading Pipe and Fittings
Copper Pro-Press Pipe and Fittings
Grooved Pipe and Fittings
Copper Flared Connections
Flanged Piping Connections
Proper Procedures for Safe Leak Checking of Piping Systems

First Aid/CPR/AED Certification (TUESDAY)
2026-04-07 17:30 - 2026-04-21 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting April 7, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Rigging for the Field (TUESDAY & THURSDAY)
2026-04-07 17:30 - 2026-05-07 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays and Thursdays starting April 7, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice530p

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to educate the Apprentice on how to become proficient with basic rigging equipment and hardware for safe rigging practices. The learning units include:

Rigging Knots & Hitches
Rigging Equipment and Hardware Safety
Execute Safety Rigging Scenarios
Recognizing and Performing Proper Crane Hand Signals

Basic Burners and Boilers (TUESDAY & THURSDAY)
2026-04-07 17:30 - 2026-05-07 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays and Thursdays starting April 7, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: E. Beulen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Backflow/Cross Connection Certification (ASSE) (TUESDAY & THURSDAY)
2026-04-07 17:30 - 2026-05-19 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Certification to Standard 5110 for Backflow Prevention Assembly Testers is available only to individuals who have a minimum of five (5) years experience in the installation or service of plumbing, mechanical, fire sprinkler, lawn irrigation or a related industry field using potable water, or 4th or 5th year apprentices from a recognized apprenticeship program. An apprentice who has not yet reached 4th year status must provide written verification of detailed plumbing/piping experience in advance of the 40-hours of instruction. Certification shall consist of a minimum of forty (40) hours of instruction and exams.

Day/Time: Tuesdays AND Thursdays starting April 7, 2026 from 5:30 p.m. to 8:30 p.m. for 6 ½ weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Emmer, C. Cappaert, & J. VandeHey

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed for plumbers and other related mechanical contractors. The course covers basic backflow hydraulics, cross-connection identification, degree of hazard, operation of backflow prevention assemblies, applications and basic installation requirements of backflow prevention assemblies. A hands-on workshop will allow students to practice test procedures on the reduced pressure principal assembly, double check valve assembly, and pressure vacuum breaker. ASSE certification in backflow prevention assembly testing, repairing, and surveying adds nationally recognized credentials to your resume, enhances your skills, and increases the number of tasks you can perform – ultimately raising your employability.

Advanced Pipe Math (TUESDAY & THURSDAY)
2026-04-07 17:30 - 2026-05-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays and Thursdays starting April 7, 2026 from 5:30 p.m. to 8:30 p.m. for 5 1/2 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

UA Local 400 Heritage
2026-04-08 17:30 - 2026-06-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting April 8, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Main Meeting Hall

Instructor: K. Rademaker/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Relay Logic & PLC
2026-04-09 17:30 - 2026-06-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Thursdays starting April 9, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Lab

Instructor: J. Benz/B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Transit, Level, & Laser (Monday)
2026-04-27 17:30 - 2026-06-01 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting April 27, 2026 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

Transit, Level, & Laser (Wednesday)
2026-04-29 17:30 - 2026-06-03 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting April 29, 2026 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

First Aid/CPR/AED Certification (MONDAY/WEDNESDAY/MONDAY)
2026-05-04 17:30 - 2026-05-11 21:30 | Kaukauna Training Center, ,
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting May 4, 2026 from 5:30 p.m. to 9:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course gives individuals the knowledge and skills necessary to recognize and provide basic care for breathing, cardiac emergencies, injuries, and sudden illness, including how to use an automated external defibrillator (AED) for victims of sudden cardiac arrest, until advanced medical personnel arrive and take over. The learning units include:

Checking an Injured or Ill Person
Cardiac Emergencies
Choking
Sudden Illnesses
Traumatic Injuries
Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Welding (MONDAY & WEDNESDAY)
2026-05-18 17:30 - 2026-06-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting May 18, 2026 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Basic Computers(Online)
2026-06-01 - 2026-08-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1, 2026 to August 16, 2026

Location: Online, N/A

Instructor: T. Adams and A. Thompson

Course Materials Needed:

Reliable computer with Microsoft Word, Excell, and PowerPoint capabilities.

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.
All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.

This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

Union 101: UA & Labor History - ONLINE
2026-06-01 - 2026-08-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1st through August 16th

Location: Online, N/A

Instructor: K .Bentle

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course introduces participants to the foundations of union membership, labor history, and the values that guide the United Association (UA). Students will gain a deeper understanding of the role unions play in protecting workers’ rights, advancing standards in the trades, and shaping the modern workplace.

Key topics include:

The UA Standard for Excellence and its impact on members, contractors, and the industry
Survival of the Fittest by Mark Breslin: strategies for leadership, accountability, and success in the trades
Major events in U.S. labor history and the growth of the labor movement
Landmark labor laws and their continuing influence on workers’ rights
The history and evolution of the UA and Local 400
The responsibilities and benefits of union membership

Emphasis is placed on connecting historical lessons and union principles with today’s workplace realities. This course prepares participants to uphold union values, strengthen solidarity, and contribute to the long-term success of the UA and its members.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Math - ONLINE
2026-06-01 - 2026-08-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1st through August 16th

Location: Online, N/A

Instructor: K .Bentle

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course is designed to strengthen foundational math skills essential for both academic and everyday use. Through a structured and practical approach, students will develop confidence and competence in essential mathematical concepts. Learning units include Whole Numbers, Simple & Complex Fractions, Decimals, Percentages, Exponents, Ratios, Proportions, and an introduction to Plane & Solid Figures. The course emphasizes problem-solving, critical thinking, and real-world applications to prepare students for further math courses or workforce readiness.

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Use & Care of Tools - ONLINE
2026-06-01 - 2026-08-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting June 1st through August 16th

Location: Online, N/A

Instructor: K. Bentle

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides online instruction in the proper use, care, and safety considerations for hand tools, power tools, and related equipment. Participants will gain valuable knowledge through demonstrations, examples, and guided discussion. Emphasis is placed on building awareness of correct procedures to improve efficiency, accuracy, and workplace safety.

Key topics include:

Proper Tool Use and Applications
Tool Care & Preventative Maintenance
Safety Protocols and Best Practices
Ladders & Scaffolding Safety Guidelines
Measurement and Layout Tools Overview
Hand and Power Tools: Functions & Safe Operation
Local 400 Shop Equipment: Use & Maintenance Guidelines

This course is designed to strengthen foundational knowledge, reinforce safe practices, and prepare participants to apply these principles effectively on the job.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

First Aid/CPR/AED Certification (June-Tuesday)
2026-06-02 17:30 - 2026-06-16 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting June 2, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Isometric Drawing - Plumbers
2026-06-10 17:30 - 2026-07-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting June 10, 2026 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

First Aid/CPR/AED Certification (July-Tuesday)
2026-07-14 17:30 - 2026-07-28 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting July 14, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

VitalCog (Mental Health Awareness)
2026-08-03 16:00 - 19:00 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: August 3, 2026 at 4:00 p.m. to 7:00 p.m.

Location: Kaukauna Training Center, Meeting Hall

Instructor: F. Ujazdowski & J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include: students will develop an understanding of the value, fundamentals and practices of peer support skills. Students will be able to demonstrate a basic knowledge of mental health literacy, find shared meaningful experiences with peers, express empathy through reflections and demonstrate active listening skills. Students will also be able to assist in connecting people who are struggling to specialty professional services such as crisis counseling and addiction recovery services.

Pipe Trades Math for Fitters & Fabricators (AFTERNOON)
2026-08-17 12:30 - 2026-11-02 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Mondays starting August 17,2026 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: A. VanScyndel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (AFTERNOON)
2026-08-17 12:30 - 2026-10-26 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 17, 2026 rom 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Pro Calculator
ITP Red Book

Course Description: This course provides students with hands-on training and technical knowledge in the most common methods of joining piping systems used throughout the plumbing and pipefitting industry. Emphasis will be placed on safety, industry standards, and proper installation techniques to ensure reliable and efficient piping systems.

Participants will gain practical experience with a variety of joining methods, including:

Safety Practices – Comprehensive review of safe work procedures, tool handling, and hazard awareness.
Carbon Threading Pipe and Fittings – Techniques for threading, cutting, and assembling carbon steel pipe.
Copper Pro-Press Pipe and Fittings – Proper use of press-fitting systems for copper piping installations.
Mega Press Pipe and Fittings – Application of press-fitting technology for carbon steel, stainless steel, and copper nickel piping systems.
Grooved Pipe and Fittings – Assembly methods for grooved couplings and fittings in mechanical piping systems.
Copper Flared Connections – Best practices for creating and inspecting flared connections.
Flanged Piping Connections – Procedures for aligning, bolting, and gasket installation.
Leak Testing Procedures – Safe and effective methods for performing leak checks on completed piping systems.

Upon completion, participants will be able to confidently and safely install piping systems using multiple joining applications, ensuring long-lasting, reliable, and code-compliant installations. They will also be able to adapt to different jobsite requirements by selecting the appropriate joining method for the task.

Advanced Pipe Trades Math (Monday)
2026-08-17 17:30 - 2026-11-02 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting August 17, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Walls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

DDC Controls & VFD's
2026-08-17 17:30 - 2026-11-09 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Mondays starting August 17, 2026 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: C. Nackers, A. Torbeck & T. Grose

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Soldering & Brazing(Mondays)
2026-08-17 17:30 - 2026-11-02 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 17, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Braze Materials

Basic Service & Customer Relations
2026-08-17 17:30 - 2026-10-26 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting August 17, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: K. Bahr & A. Kloehn

Course Materials Needed:

Pen
Notebook
Computer (Personal Device or LU400 Chromebook)
Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on learning the proper etiquette for interacting with outside customers as well as inside customers at your business. Including communication styles and ways to properly interact with co-workers, direct reports and managers. This will also help you gain confidence in interactions and methods of de-escalation during tough situations. You will also learn how to read body language and understand the different personality types of people you will comes across in the workforce.

Welding (Monday)
2026-08-17 17:30 - 2026-10-26 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting August 17, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Tube Bending (Tuesday)
2026-08-18 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 18, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K .Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Mechanical Equipment Service (MES) (Tuesday)
2026-08-18 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 18, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: B. Hagens and J. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Advanced Pipe Trades Math (Tuesday)
2026-08-18 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting August 18, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

UA Heritage
2026-08-19 17:30 - 2026-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting August 19. 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Meeting Hall

Instructor: L. LaPierre/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Soldering & Brazing(Wednesdays)
2026-08-19 17:30 - 2026-11-04 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting August 19, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: B.Eick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Braze Materials

Tube Bending (Thursday)
2026-08-20 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting August 20, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Relay Logic & PLC's
2026-08-20 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Thursdays starting August 20, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Benz & B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Pipe Joining Applications (Thursday)
2026-08-20 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting August 20, and skipping August 27th, then resuming September 3rd 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: M. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Pro Calculator
ITP Red Book

Course Description: This course provides students with hands-on training and technical knowledge in the most common methods of joining piping systems used throughout the plumbing and pipefitting industry. Emphasis will be placed on safety, industry standards, and proper installation techniques to ensure reliable and efficient piping systems.

Participants will gain practical experience with a variety of joining methods, including:

Safety Practices – Comprehensive review of safe work procedures, tool handling, and hazard awareness.
Carbon Threading Pipe and Fittings – Techniques for threading, cutting, and assembling carbon steel pipe.
Copper Pro-Press Pipe and Fittings – Proper use of press-fitting systems for copper piping installations.
Mega Press Pipe and Fittings – Application of press-fitting technology for carbon steel, stainless steel, and copper nickel piping systems.
Grooved Pipe and Fittings – Assembly methods for grooved couplings and fittings in mechanical piping systems.
Copper Flared Connections – Best practices for creating and inspecting flared connections.
Flanged Piping Connections – Procedures for aligning, bolting, and gasket installation.
Leak Testing Procedures – Safe and effective methods for performing leak checks on completed piping systems.

Upon completion, participants will be able to confidently and safely install piping systems using multiple joining applications, ensuring long-lasting, reliable, and code-compliant installations. They will also be able to adapt to different jobsite requirements by selecting the appropriate joining method for the task.

Mechanical Equipment Service (MES) (Thursdays)
2026-08-20 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 20, 2026 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: B. Hagens and J. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course covers many aspects of the ever-changing Service Technician Field. The learning units include:

Start, Test, and Balance (Air Side)
Start, Test, and Balance (Hydronic Side)
Water Treatment
Pneumatic Controls
Advanced Refrigeration and Chillers
Advanced Burners and Boilers
Advanced Electrical Controls

Pipe Trades Math for Fitters & Fabricators (Monday)
2026-08-24 17:30 - 2026-11-02 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Mondays starting August 24, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Basic Rigging for the SHOP (AFTERNOON)
2026-08-25 12:30 - 2026-10-27 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Pipe Trades Math, Basic Math Online

Day/Time: Tuesdays starting August 25, 2026 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Vosters

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with the foundational skills necessary to perform basic rigging tasks safely and effectively within a fabrication or industrial shop environment. Focus is placed on the use of rigging equipment commonly found in shop settings, with an emphasis on positioners, overhead crane systems, and routine material handling procedures.

Apprentices will learn the principles of safe rigging, proper hardware selection, load control, and the importance of clear communication during lifts. The course includes both classroom instruction and hands-on training using shop-specific rigging scenarios to reinforce best practices and hazard awareness in confined and repetitive-use areas.

Learning Units Include:

Rigging Knots & Hitches:
Training on essential knots and hitches relevant to shop work, including secure methods for lifting and moving pipe, structural steel, fabricated assemblies, and other materials within the shop.
Rigging Equipment and Hardware Safety:
Overview of common shop rigging tools and hardware such as slings, shackles, hoists, lifting beams, and spreader bars. Apprentices will learn to inspect equipment, interpret load ratings, and understand how to safely operate within lifting capacity guidelines.
Execute Safe Rigging Scenarios:
Hands-on exercises simulating typical shop lifts, including vertical and horizontal moves using overhead cranes, jib cranes, and monorails. Apprentices will apply planning, communication, and execution strategies to safely handle repetitive and precision-based lifts in tight spaces.
Recognizing and Performing Proper Crane Hand Signals:
Instruction on standardized crane hand signals used to guide operators in shop environments. Apprentices will practice giving and interpreting signals to ensure safe, efficient coordination during lifts.

This course prepares apprentices to confidently assist with daily rigging tasks in a shop setting, where efficiency, safety, and repeatability are critical. Emphasis is placed on creating safe lift plans, understanding positioner hazards, and operating within the established procedures of a controlled indoor work environment.

Plumbing Applications (Tuesday AND Thursday)
2026-08-25 17:30 - 2026-10-13 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting August 25, 2026 from 5:30 p.m. to 8:30 p.m. for 7.5 weeks

Location: Kaukauna Training Center, Sprinklerfitter Room & Solder & Braze Lab

Instructor: N. Leiser & J. Parker

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Pipe Trades Math for Fitters & Fabricators (Tuesday)
2026-08-25 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays starting August 25, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Barlow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Basic Rigging for the Field (Tuesday)
2026-08-25 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 25, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with a solid foundation in basic rigging principles, focusing on the safe and effective use of rigging equipment in field applications. Emphasis is placed on hands-on learning, proper safety procedures, and the development of practical skills that can be immediately applied on job sites. Apprentices will gain the knowledge required to identify and utilize appropriate rigging hardware, perform critical safety checks, and effectively communicate during lifting operations.

Through a combination of classroom instruction and real-world scenarios, apprentices will become familiar with industry standards, safety regulations, and best practices related to rigging. The course also reinforces the importance of teamwork, communication, and hazard recognition in ensuring safe and successful lifts.

Learning Units Include:

Rigging Knots & Hitches:
Instruction and hands-on practice with essential knots and hitches commonly used in rigging operations. Apprentices will learn when and how to apply each type for secure and efficient load control.
Rigging Equipment and Hardware Safety:
An overview of basic rigging components such as shackles, slings, hooks, and eye bolts. Apprentices will learn how to inspect rigging hardware for defects, understand load ratings, and ensure compliance with safety standards.
Execute Safe Rigging Scenarios:
Interactive exercises and simulated lifts that require apprentices to plan and execute rigging setups using appropriate gear, configurations, and safety measures. Focus will be on problem-solving, situational awareness, and risk mitigation.
Recognizing and Performing Proper Crane Hand Signals:
Apprentices will learn the standardized crane hand signals used in the field to ensure clear communication between riggers and crane operators. Training includes both recognition and execution of signals in practical exercises.

By the end of the course, apprentices will demonstrate proficiency in basic rigging practices and be prepared to assist safely and effectively in routine lifting operations under supervision.

Welding (Tuesday)
2026-08-25 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting August 25, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Basic Burners & Boilers
2026-08-25 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting August 25, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: E. Beulen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Pipe Joining Applications (Tuesday)
2026-08-25 17:30 - 2026-10-27 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting August 25, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Pro Calculator
ITP Red Book

Course Description: This course provides students with hands-on training and technical knowledge in the most common methods of joining piping systems used throughout the plumbing and pipefitting industry. Emphasis will be placed on safety, industry standards, and proper installation techniques to ensure reliable and efficient piping systems.

Participants will gain practical experience with a variety of joining methods, including:

Safety Practices – Comprehensive review of safe work procedures, tool handling, and hazard awareness.
Carbon Threading Pipe and Fittings – Techniques for threading, cutting, and assembling carbon steel pipe.
Copper Pro-Press Pipe and Fittings – Proper use of press-fitting systems for copper piping installations.
Mega Press Pipe and Fittings – Application of press-fitting technology for carbon steel, stainless steel, and copper nickel piping systems.
Grooved Pipe and Fittings – Assembly methods for grooved couplings and fittings in mechanical piping systems.
Copper Flared Connections – Best practices for creating and inspecting flared connections.
Flanged Piping Connections – Procedures for aligning, bolting, and gasket installation.
Leak Testing Procedures – Safe and effective methods for performing leak checks on completed piping systems.

Upon completion, participants will be able to confidently and safely install piping systems using multiple joining applications, ensuring long-lasting, reliable, and code-compliant installations. They will also be able to adapt to different jobsite requirements by selecting the appropriate joining method for the task.

Welding (AFTERNOON)
2026-08-26 12:30 - 2026-10-28 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 26, 2026 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Blueprint Reading for Plumbers
2026-08-26 17:30 - 2026-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting August 26, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Room

Instructor: C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Basic Rigging for the SHOP
2026-08-26 17:30 - 2026-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Pipe Trades Math, Basic Math Online

Day/Time: Wednesdays starting August 26, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with the foundational skills necessary to perform basic rigging tasks safely and effectively within a fabrication or industrial shop environment. Focus is placed on the use of rigging equipment commonly found in shop settings, with an emphasis on positioners, overhead crane systems, and routine material handling procedures.

Apprentices will learn the principles of safe rigging, proper hardware selection, load control, and the importance of clear communication during lifts. The course includes both classroom instruction and hands-on training using shop-specific rigging scenarios to reinforce best practices and hazard awareness in confined and repetitive-use areas.

Learning Units Include:

Rigging Knots & Hitches:
Training on essential knots and hitches relevant to shop work, including secure methods for lifting and moving pipe, structural steel, fabricated assemblies, and other materials within the shop.
Rigging Equipment and Hardware Safety:
Overview of common shop rigging tools and hardware such as slings, shackles, hoists, lifting beams, and spreader bars. Apprentices will learn to inspect equipment, interpret load ratings, and understand how to safely operate within lifting capacity guidelines.
Execute Safe Rigging Scenarios:
Hands-on exercises simulating typical shop lifts, including vertical and horizontal moves using overhead cranes, jib cranes, and monorails. Apprentices will apply planning, communication, and execution strategies to safely handle repetitive and precision-based lifts in tight spaces.
Recognizing and Performing Proper Crane Hand Signals:
Instruction on standardized crane hand signals used to guide operators in shop environments. Apprentices will practice giving and interpreting signals to ensure safe, efficient coordination during lifts.

This course prepares apprentices to confidently assist with daily rigging tasks in a shop setting, where efficiency, safety, and repeatability are critical. Emphasis is placed on creating safe lift plans, understanding positioner hazards, and operating within the established procedures of a controlled indoor work environment.

Basic Rigging for the Field (Wednesday)
2026-08-26 17:30 - 2026-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting August 26, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: A. Gussert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with a solid foundation in basic rigging principles, focusing on the safe and effective use of rigging equipment in field applications. Emphasis is placed on hands-on learning, proper safety procedures, and the development of practical skills that can be immediately applied on job sites. Apprentices will gain the knowledge required to identify and utilize appropriate rigging hardware, perform critical safety checks, and effectively communicate during lifting operations.

Through a combination of classroom instruction and real-world scenarios, apprentices will become familiar with industry standards, safety regulations, and best practices related to rigging. The course also reinforces the importance of teamwork, communication, and hazard recognition in ensuring safe and successful lifts.

Learning Units Include:

Rigging Knots & Hitches:
Instruction and hands-on practice with essential knots and hitches commonly used in rigging operations. Apprentices will learn when and how to apply each type for secure and efficient load control.
Rigging Equipment and Hardware Safety:
An overview of basic rigging components such as shackles, slings, hooks, and eye bolts. Apprentices will learn how to inspect rigging hardware for defects, understand load ratings, and ensure compliance with safety standards.
Execute Safe Rigging Scenarios:
Interactive exercises and simulated lifts that require apprentices to plan and execute rigging setups using appropriate gear, configurations, and safety measures. Focus will be on problem-solving, situational awareness, and risk mitigation.
Recognizing and Performing Proper Crane Hand Signals:
Apprentices will learn the standardized crane hand signals used in the field to ensure clear communication between riggers and crane operators. Training includes both recognition and execution of signals in practical exercises.

By the end of the course, apprentices will demonstrate proficiency in basic rigging practices and be prepared to assist safely and effectively in routine lifting operations under supervision.

Isometric Drawing for Plumbers
2026-08-26 17:30 - 2026-10-14 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting August 26, 2026 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Sprinklerfitter Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

Industrial Rigging I & UA Crane Signalperson Certification (Advanced Rigging)
2026-08-26 17:30 - 2026-11-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the FIELD, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging for the FIELD, Basic Math Online

Day/Time: Wednesdays starting August 26, 2026 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber/J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to expand upon the foundational rigging knowledge acquired during the apprenticeship program, with a strong emphasis on advanced safety practices and the strategic movement of large, complex, or irregular loads. As heavy lifting and load handling play a critical role in both modern manufacturing and construction environments, this training ensures participants are well-prepared to plan and execute safe, efficient rigging operations in a variety of real-world scenarios.

Participants will engage with both classroom instruction and practical applications focused on the technical, mathematical, and mechanical considerations of advanced rigging. Emphasis is placed on understanding rigging plans, calculating load weights, using proper lifting angles, and managing non-symmetrical and shifting loads with precision and confidence.

Key Learning Units Include:

Review of Basic Rigging Principles and Terminology
Identification and Management of Non-Symmetrical and Irregular Loads
Chain-Fall Systems and High-Line Applications
Sling Angle Calculations and Their Effect on Load Tension
Determining Total Rigging Load Weights and Center of Gravity
Load Path Planning and Risk Mitigation
Communication and Signal Person Best Practices

This course prepares journey-level workers and advanced apprentices for the increased responsibilities and challenges associated with critical lifts, helping to ensure safe operations on job sites where heavy rigging is required. Students will also take the UA Crane Signalperson Practical and Written Exams as a part of the class.

Welding (Wednesday)
2026-08-26 17:30 - 2026-10-28 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting August 26, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Metallurgy (AFTERNOON)
2026-08-27 12:30 - 2026-10-29 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 27, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Krejcarek

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course offers a foundational understanding of the properties of metals and their alloys, as well as an introduction to alloy formation principles. Students will explore common manufacturing defects and failure mechanisms in engineering alloys, equipping them with the knowledge to enhance product quality and reliability. Key concepts will be reinforced through demonstrations and real-world case studies, providing practical insights into metallurgical processes and applications.

Blueprint Reading for Steamfitters
2026-08-27 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 27, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

OSHA 30-Construction Certification (Thursday)
2026-08-27 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 27, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Room

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: This detailed course provides construction professionals with an in-depth understanding of OSHA standards and best practices for maintaining a safe and compliant jobsite. Designed for supervisors, foremen, safety managers, and workers with safety responsibilities, the program emphasizes hazard recognition, risk reduction, and the development of proactive safety and health programs.

Through a combination of instruction, case studies, and practical applications, participants will gain the knowledge and skills needed to identify common jobsite hazards, implement effective controls, and ensure compliance with OSHA regulations.

Learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement, and Safety Management Programs
Fall Protection
Scaffolds
Stairways and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical Safety (NFPA 70E and Lockout/Tagout)
Welding & Cutting
Powered Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, and Barricades
Safety & Health Programs

Upon successful completion, participants will earn the OSHA 30-Hour Construction Safety Certification, demonstrating their competence in construction safety standards and their commitment to creating and maintaining safe workplaces.

Financial Literacy
2026-08-27 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 3rd Year Apprentice or above

Day/Time: Thursdays starting August 27, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Calculator

Course Description: This class is an instructor-led curriculum designed to equip UA400 members with the essential knowledge and practical skills needed to manage their personal finances confidently and effectively. Through engaging lessons, skill-building activities, and access to valuable resources, participants will learn how to make informed financial decisions and develop healthy money habits.

This course covers a range of financial topics tailored to support everyday needs, including budgeting, saving, understanding credit, managing debt, and planning for the future.

Please note: The instructor is not a financial advisor and will not provide personal financial advice. Instead, the instruction is focused on delivering unbiased, relevant, and accurate financial education to empower members to take control of their financial well-being.

The learning units include:

Advantages of Utilizing Banks
Basics of Banking
Track you Spending
Setting Goals
Implementing a Budget
Debt Management
Understanding Credit
Being a Smart Consumer
Being Prepared for the Unknown
Protecting you Identity and Other Assets
Retirement Planning
Disasters – Financial Preparation and Recovery

Welding (Thursday)
2026-08-27 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting August 27, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Metallurgy
2026-08-27 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting August 27, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course offers a foundational understanding of the properties of metals and their alloys, as well as an introduction to alloy formation principles. Students will explore common manufacturing defects and failure mechanisms in engineering alloys, equipping them with the knowledge to enhance product quality and reliability. Key concepts will be reinforced through demonstrations and real-world case studies, providing practical insights into metallurgical processes and applications.

Pipe Trades Math for Fitters & Fabricators (Thursday)
2026-08-27 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Thursdays starting August 27, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Basic Rigging for the Field (Thursday)
2026-08-27 17:30 - 2026-10-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting August 27, 2026 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with a solid foundation in basic rigging principles, focusing on the safe and effective use of rigging equipment in field applications. Emphasis is placed on hands-on learning, proper safety procedures, and the development of practical skills that can be immediately applied on job sites. Apprentices will gain the knowledge required to identify and utilize appropriate rigging hardware, perform critical safety checks, and effectively communicate during lifting operations.

Through a combination of classroom instruction and real-world scenarios, apprentices will become familiar with industry standards, safety regulations, and best practices related to rigging. The course also reinforces the importance of teamwork, communication, and hazard recognition in ensuring safe and successful lifts.

Learning Units Include:

Rigging Knots & Hitches:
Instruction and hands-on practice with essential knots and hitches commonly used in rigging operations. Apprentices will learn when and how to apply each type for secure and efficient load control.
Rigging Equipment and Hardware Safety:
An overview of basic rigging components such as shackles, slings, hooks, and eye bolts. Apprentices will learn how to inspect rigging hardware for defects, understand load ratings, and ensure compliance with safety standards.
Execute Safe Rigging Scenarios:
Interactive exercises and simulated lifts that require apprentices to plan and execute rigging setups using appropriate gear, configurations, and safety measures. Focus will be on problem-solving, situational awareness, and risk mitigation.
Recognizing and Performing Proper Crane Hand Signals:
Apprentices will learn the standardized crane hand signals used in the field to ensure clear communication between riggers and crane operators. Training includes both recognition and execution of signals in practical exercises.

By the end of the course, apprentices will demonstrate proficiency in basic rigging practices and be prepared to assist safely and effectively in routine lifting operations under supervision.

First Aid/CPR/AED Certification (August/September-Monday)
2026-08-31 17:30 - 2026-09-15 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting August 31, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (August/September-Tuesday)
2026-09-01 17:30 - 2026-09-15 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting September 1st-September 15th 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Use & Care of Tools - ONLINE
2026-09-08 - 2026-11-15
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, September 8th through November 15th

Location: Online, N/A

Instructor: K. Bentle

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides online instruction in the proper use, care, and safety considerations for hand tools, power tools, and related equipment. Participants will gain valuable knowledge through demonstrations, examples, and guided discussion. Emphasis is placed on building awareness of correct procedures to improve efficiency, accuracy, and workplace safety.

Key topics include:

Proper Tool Use and Applications
Tool Care & Preventative Maintenance
Safety Protocols and Best Practices
Ladders & Scaffolding Safety Guidelines
Measurement and Layout Tools Overview
Hand and Power Tools: Functions & Safe Operation
Local 400 Shop Equipment: Use & Maintenance Guidelines

This course is designed to strengthen foundational knowledge, reinforce safe practices, and prepare participants to apply these principles effectively on the job.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Math - ONLINE
2026-09-08 - 2026-11-22
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 8th through November 22nd

Location: Online, N/A

Instructor: K .Bentle

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course is designed to strengthen foundational math skills essential for both academic and everyday use. Through a structured and practical approach, students will develop confidence and competence in essential mathematical concepts. Learning units include Whole Numbers, Simple & Complex Fractions, Decimals, Percentages, Exponents, Ratios, Proportions, and an introduction to Plane & Solid Figures. The course emphasizes problem-solving, critical thinking, and real-world applications to prepare students for further math courses or workforce readiness.

There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Union 101: UA & Labor History - ONLINE
2026-09-08 - 2026-11-15
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 8th through November 15th

Location: Online, N/A

Instructor: K. Bentle

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course introduces participants to the foundations of union membership, labor history, and the values that guide the United Association (UA). Students will gain a deeper understanding of the role unions play in protecting workers’ rights, advancing standards in the trades, and shaping the modern workplace.

Key topics include:

The UA Standard for Excellence and its impact on members, contractors, and the industry
Survival of the Fittest by Mark Breslin: strategies for leadership, accountability, and success in the trades
Major events in U.S. labor history and the growth of the labor movement
Landmark labor laws and their continuing influence on workers’ rights
The history and evolution of the UA and Local 400
The responsibilities and benefits of union membership

Emphasis is placed on connecting historical lessons and union principles with today’s workplace realities. This course prepares participants to uphold union values, strengthen solidarity, and contribute to the long-term success of the UA and its members.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Computers(Online)
2026-09-08 - 2026-11-22
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 08, 2026 to November 22, 2026

Location: Online, N/A

Instructor: T. Adams and A. Thompson

Course Materials Needed:

Reliable computer with Microsoft Word, Excell, and PowerPoint capabilities.

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.
All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

MT 101-Metal Trades Advancement(Online)
2026-09-08 - 2026-11-22
Pre-Requisite:

None
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting September 08, 2026 to November 22, 2026

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed: None

Course Description: Metal Trades 101 is designed for Local 400 Metal Trades members looking to advance their skills and knowledge as metal trades workers. This course will provide an in-depth understanding of the different levels within the metal trades classification, the Collective Bargaining Agreement (CBA), and the valuable union benefits available to members. Participants will gain insights into career progression, workplace rights, and the opportunities that come with union membership. Whether you're new to the trade or preparing for the next step in your career, this class will equip you with the essential knowledge to succeed in the industry.

First Aid/CPR/AED Certification (September-Tuesday)
2026-09-22 17:30 - 2026-10-06 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting September 22, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (October-Monday)
2026-10-05 17:30 - 2026-10-19 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting October 5, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

VitalCog (Mental Health Awareness)
2026-11-02 16:00 - 19:00 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Monday, November 2, 2027 at 4:00 p.m.

Location: Kaukauna Training Center, Meeting Hall

Instructor: F. Ujazdowski & J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include: students will develop an understanding of the value, fundamentals and practices of peer support skills. Students will be able to demonstrate a basic knowledge of mental health literacy, find shared meaningful experiences with peers, express empathy through reflections and demonstrate active listening skills. Students will also be able to assist in connecting people who are struggling to specialty professional services such as crisis counseling and addiction recovery services.

Orbital (UA) Welding Certification (AFTERNOON)
2026-11-09 12:30 - 2026-11-24 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: GTAW Cert.

Day/Time: Mondays AND Wednesdays starting November 9, 2026 from 12:30 p.m. to 3:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Use & Care of Tools - ONLINE
2026-11-30 - 2027-02-14
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting November 30th to February 14th

Location: Online, N/A

Instructor: K. Bentle

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides online instruction in the proper use, care, and safety considerations for hand tools, power tools, and related equipment. Participants will gain valuable knowledge through demonstrations, examples, and guided discussion. Emphasis is placed on building awareness of correct procedures to improve efficiency, accuracy, and workplace safety.

Key topics include:

Proper Tool Use and Applications
Tool Care & Preventative Maintenance
Safety Protocols and Best Practices
Ladders & Scaffolding Safety Guidelines
Measurement and Layout Tools Overview
Hand and Power Tools: Functions & Safe Operation
Local 400 Shop Equipment: Use & Maintenance Guidelines

This course is designed to strengthen foundational knowledge, reinforce safe practices, and prepare participants to apply these principles effectively on the job.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Union 101: UA & Labor History - ONLINE
2026-11-30 - 2027-02-14
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting November 30th through February 14th, 2027

Location: Online, N/A

Instructor: K. Bentle

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course introduces participants to the foundations of union membership, labor history, and the values that guide the United Association (UA). Students will gain a deeper understanding of the role unions play in protecting workers’ rights, advancing standards in the trades, and shaping the modern workplace.

Key topics include:

The UA Standard for Excellence and its impact on members, contractors, and the industry
Survival of the Fittest by Mark Breslin: strategies for leadership, accountability, and success in the trades
Major events in U.S. labor history and the growth of the labor movement
Landmark labor laws and their continuing influence on workers’ rights
The history and evolution of the UA and Local 400
The responsibilities and benefits of union membership

Emphasis is placed on connecting historical lessons and union principles with today’s workplace realities. This course prepares participants to uphold union values, strengthen solidarity, and contribute to the long-term success of the UA and its members.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Math - ONLINE
2026-11-30 - 2027-02-14
Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting November 30, 2026 to February 14th, 2026

Location: Online, N/A

Instructor: K.Bentle

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)Course Description: This course is designed to strengthen foundational math skills essential for both academic and everyday use. Through a structured and practical approach, students will develop confidence and competence in essential mathematical concepts. Learning units include Whole Numbers, Simple & Complex Fractions, Decimals, Percentages, Exponents, Ratios, Proportions, and an introduction to Plane & Solid Figures. The course emphasizes problem-solving, critical thinking, and real-world applications to prepare students for further math courses or workforce readiness.There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.

You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Computers(Online)
2026-11-30 - 2027-02-14
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting November 30, 2026 to February 14, 2027

Location: Online, N/A

Instructor: T. Adams and A. Thompson

Course Materials Needed:

Reliable computer with Microsoft Word, Excell, and PowerPoint capabilities.

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.
All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

MT 101-Metal Trades Advancement(Online)
2026-11-30 - 2027-02-14
Pre-Requisite:

None
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting November 30, 2026 to February 14, 2027

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed: None

Course Description: Metal Trades 101 is designed for Local 400 Metal Trades members looking to advance their skills and knowledge as metal trades workers. This course will provide an in-depth understanding of the different levels within the metal trades classification, the Collective Bargaining Agreement (CBA), and the valuable union benefits available to members. Participants will gain insights into career progression, workplace rights, and the opportunities that come with union membership. Whether you're new to the trade or preparing for the next step in your career, this class will equip you with the essential knowledge to succeed in the industry.

Orbital (UA) Welding Certification
2026-11-30 17:30 - 2026-12-14 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: GTAW Cert.

Day/Time: Mondays AND Wednesdays starting November 30, 2026 from 5:30 p.m. to 8:30 p.m. for 2.5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course will cover process variables, system programmer control functions and gives the theoretical basis for weld program development. It’s a hands-on course with 75% of the time spend on a power supply producing weld samples. Students will qualify to United Association Weld Test Specification the UA-18A. Coupons are examined by radiography in accordance with ASME Code Section IX. The learning units include:

Safety & Basic Operation
Introduction to Tube Cutting and Tube Facing
System Set-Up, Configurations, and Operational Descriptions
Basic Weld Head Set Up and Operation
Software Navigation
Developing Basic Programs
Step Weld Programming
Certification Testing

Service Pipe Math & Tube Bending (SPECIAL SESSION DATES)
2026-12-01 17:30 - 2026-12-22 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: 5:30 p.m. to 8:30 p.m. on the following dates:

Week 1

Tuesday, December 1, 2026
Wednesday, December 2, 2026
Thursday, December 3, 2026

Week 2

Tuesday, December 8, 2026
Thursday, December 10, 2026

Week 3

Tuesday, December 15, 2026
Thursday, December 17, 2026

Week 4

Tuesday, December 22, 2026

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

First Aid/CPR/AED Certification (Tuesday AND Thursday)
2026-12-01 17:30 - 2026-12-08 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting December 1, 2026 from 5:30 p.m. to 9:30 p.m. for 1.5 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Basic Refrigeration & EPA Certificaton
2026-12-01 17:30 - 2026-12-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting December 1, 2027 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: T. Grossman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include:

The Refrigeration Cycle
Basic Thermodynamics
Heat Transfer
Temperature/Pressure Relationship
Safety

This course also prepares students to test for CFC Certification in Type 1 (Small Appliances), Type II (High Pressure and Very High Pressure Appliances), Type III (Low Pressure Appliances), and Universal Certification (encompasses Type I, II, & III).

First Aid/CPR/AED Certification (AFTERNOON)
2026-12-07 12:30 - 2026-12-14 16:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays and Wednesdays starting December 7, 2026 from 12:30 p.m. to 4:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (Monday AND Wednesday)
2026-12-07 17:30 - 2026-12-14 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays AND Wednesdays starting December 7, 2026 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (AFTERNOON)
2027-01-04 12:30 - 2027-01-18 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 4, 2027 from 12:30 p.m. to 4:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Blueprint Reading for Fabricators (AFTERNOON)
2027-01-04 12:30 - 2027-03-08 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 4, 2027 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: A. VanSchyndel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning units include:

Welding Symbols
Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Orthographic Drawings
Piping Plans and Elevations
Piping Isometrics
Spool Drawings

Pipe Trades Math for Fitters & Fabricators (AFTERNOON)
2027-01-04 12:30 - 2027-03-10 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Mondays starting January 4, 2027 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Classroom

Instructor: B. Sokel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Welding (Monday)
2027-01-04 17:30 - 2027-03-08 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Soldering & Brazing (Mondays)
2027-01-04 17:30 - 2027-03-15 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Brazealbe Materials

Plumbing Service & Repair
2027-01-04 17:30 - 2027-04-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, 2nd Floor Plumbing Lab

Instructor: C. Boylan & L. DuBois

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will concentrate on hands-on skills training utilizing plumbing service mobile classroom training modules and appropriate tools and equipment. The course emphasizes the customer service and communication skills needed in the plumbing service industry. It will include material referencing plumbing service troubleshooting, repair installation, sales, business operations, vehicles and equipment, and company policies.

First Aid/CPR/AED Certification (January-Monday)
2027-01-04 17:30 - 2027-01-18 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

DDC Controls & VFD's
2027-01-04 17:30 - 2027-03-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 12 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: C. Nackers, T. Grose and A. Torbeck

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the fundamentals, design, and applications of HVAC Direct Digital Control (DDC) systems. This course will also teach basic information needed to understand the installation, operation, and troubleshooting of Variable Frequency Drives (VFD’s) for the HVAC market in various applications. The learning units include:

Introduction to DDC Controls
Electronic Sensors
Networking and System Architecture
Communication Protocols
System Applications
Commissioning
Final Control Elements
VFD Troubleshooting

Blueprint Reading for Fabricators
2027-01-04 17:30 - 2027-03-08 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: A. Schmidley

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on the basic knowledge needed to create and interpret process pipe drawings and introduce the Apprentice to pipe fittings, valves, and equipment. The learning units include:

Welding Symbols
Overview of Pipe Drafting
Pipe, Fittings, Valves, Pumps, Tanks, and Vessels
Orthographic Drawings
Piping Plans and Elevations
Piping Isometrics
Spool Drawings

Basic Rigging for the Field (Monday)
2027-01-04 17:30 - 2027-03-08 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: D. Zeeman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with a solid foundation in basic rigging principles, focusing on the safe and effective use of rigging equipment in field applications. Emphasis is placed on hands-on learning, proper safety procedures, and the development of practical skills that can be immediately applied on job sites. Apprentices will gain the knowledge required to identify and utilize appropriate rigging hardware, perform critical safety checks, and effectively communicate during lifting operations.

Through a combination of classroom instruction and real-world scenarios, apprentices will become familiar with industry standards, safety regulations, and best practices related to rigging. The course also reinforces the importance of teamwork, communication, and hazard recognition in ensuring safe and successful lifts.

Learning Units Include:

Rigging Knots & Hitches:
Instruction and hands-on practice with essential knots and hitches commonly used in rigging operations. Apprentices will learn when and how to apply each type for secure and efficient load control.
Rigging Equipment and Hardware Safety:
An overview of basic rigging components such as shackles, slings, hooks, and eye bolts. Apprentices will learn how to inspect rigging hardware for defects, understand load ratings, and ensure compliance with safety standards.
Execute Safe Rigging Scenarios:
Interactive exercises and simulated lifts that require apprentices to plan and execute rigging setups using appropriate gear, configurations, and safety measures. Focus will be on problem-solving, situational awareness, and risk mitigation.
Recognizing and Performing Proper Crane Hand Signals:
Apprentices will learn the standardized crane hand signals used in the field to ensure clear communication between riggers and crane operators. Training includes both recognition and execution of signals in practical exercises.

By the end of the course, apprentices will demonstrate proficiency in basic rigging practices and be prepared to assist safely and effectively in routine lifting operations under supervision.

Advanced Pipe Trades Math (Monday)
2027-01-04 17:30 - 2027-03-15 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: T. Wunder

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

4th Year Steamfitter (Construction) Related (Monday)
2027-01-04 17:30 - 2027-03-15 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting January 4, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Smet/B.Eick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Welding (Tuesday)
2027-01-05 17:30 - 2027-03-09 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Tube Bending (Tuesday)
2027-01-05 17:30 - 2027-03-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: K. Schneider

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Plumbing Applications
2027-01-05 17:30 - 2027-04-13 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 15 weeks

Location: Kaukauna Training Center, HVAC Service Lab & Solder & Braze Lab

Instructor: N. Leiser & J. Parker

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: You will learn the proper installation techniques for plumbing systems on residential, commercial and industrial projects, and you’ll gain the skills to install the associated piping, fittings and fixtures, and the code knowledge related to the trade.

Plumbing Service & Repair

Pipe Trades Math for Fitters & Fabricators (Tuesday)
2027-01-05 17:30 - 2027-03-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesday starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Barlow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (Tuesday)
2027-01-05 17:30 - 2027-03-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Pro Calculator
ITP Red Book

Course Description: This course provides students with hands-on training and technical knowledge in the most common methods of joining piping systems used throughout the plumbing and pipefitting industry. Emphasis will be placed on safety, industry standards, and proper installation techniques to ensure reliable and efficient piping systems.

Participants will gain practical experience with a variety of joining methods, including:

Safety Practices – Comprehensive review of safe work procedures, tool handling, and hazard awareness.
Carbon Threading Pipe and Fittings – Techniques for threading, cutting, and assembling carbon steel pipe.
Copper Pro-Press Pipe and Fittings – Proper use of press-fitting systems for copper piping installations.
Mega Press Pipe and Fittings – Application of press-fitting technology for carbon steel, stainless steel, and copper nickel piping systems.
Grooved Pipe and Fittings – Assembly methods for grooved couplings and fittings in mechanical piping systems.
Copper Flared Connections – Best practices for creating and inspecting flared connections.
Flanged Piping Connections – Procedures for aligning, bolting, and gasket installation.
Leak Testing Procedures – Safe and effective methods for performing leak checks on completed piping systems.

Upon completion, participants will be able to confidently and safely install piping systems using multiple joining applications, ensuring long-lasting, reliable, and code-compliant installations. They will also be able to adapt to different jobsite requirements by selecting the appropriate joining method for the task.

OSHA 30-Construction Certification (Tuesday)
2027-01-05 17:30 - 2027-03-09 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: N. Berger

Course Materials Needed: N/A

Course Description: This detailed course provides construction professionals with an in-depth understanding of OSHA standards and best practices for maintaining a safe and compliant jobsite. Designed for supervisors, foremen, safety managers, and workers with safety responsibilities, the program emphasizes hazard recognition, risk reduction, and the development of proactive safety and health programs.

Through a combination of instruction, case studies, and practical applications, participants will gain the knowledge and skills needed to identify common jobsite hazards, implement effective controls, and ensure compliance with OSHA regulations.

Learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement, and Safety Management Programs
Fall Protection
Scaffolds
Stairways and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical Safety (NFPA 70E and Lockout/Tagout)
Welding & Cutting
Powered Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, and Barricades
Safety & Health Programs

Upon successful completion, participants will earn the OSHA 30-Hour Construction Safety Certification, demonstrating their competence in construction safety standards and their commitment to creating and maintaining safe workplaces.

First Aid/CPR/AED Certification (January-Tuesday)
2027-01-05 17:30 - 2027-01-19 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Blueprint Reading for Steamfitters (Tuesday)
2027-01-05 17:30 - 2027-03-09 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Advanced Pipe Trades Math (Tuesday)
2027-01-05 17:30 - 2027-01-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

4th Year Service Related
2027-01-05 17:30 - 2027-03-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting January 5, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: J. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Service Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

Welding (AFTERNOON)
2027-01-06 12:30 - 2027-03-10 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 6, 2027 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

UA Heritage (AFTERNOON)
2027-01-06 12:30 - 2027-03-10 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 6, 2027 from 12:30 p.m. to 3:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Hall

Instructor: J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Welding (Wednesday)
2027-01-06 17:30 - 2027-03-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Wednesdays starting January 6, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

UA Heritage
2027-01-06 17:30 - 2027-03-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting January 6, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Meeting Hall

Instructor: L. LaPierre/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Medical Gas Installer Certification
2027-01-06 17:30 - 2027-03-17 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Soldering and Brazing, plus 4 Years of Piping Experience per NITC

Day/Time: Wednesdays starting January 6, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab & Solder & Braze Lab

Instructor: D. Huth and R. Krause

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: A Medical Gas Installer certification candidate is a qualified individual who can demonstrate competence within their scope and will be proficient in and experienced in the installation of medical gas and vacuum systems covered by the ASSE Series 6000 Standard. Installers include anyone who works on or installs piping or components, including brazers. A qualified Medical Gas Installer may perform these tasks alone, or through the supervision of other individuals.

In addition to knowledge of product installation, a Medical Gas Installer is required to have a general knowledge of the applicable laws, codes, rules, listing agencies, and regulations from the federal, state, and local levels pertaining to medical gas and vacuum systems as well as knowledge of product performance, system and system component testing, documenting and recording, and medical gas terminology. Medical gas systems and equipment covered in the ASSE Series 6000 Standard include health care facilities within the scope of NFPA 99, Health Care Facilities Code. Medical gas piping systems include vacuum piping.

Isometric Drawing for Plumbers
2027-01-06 17:30 - 2027-02-24 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 6, 2027 from 5:30 p.m. to 8:30 p.m. for 8 weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Cappaert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course is designed to interpret all types of trade drawings, isometric plans, and elevation drawings for plumbers. The learning units include:

Orthographic Sketches
Isometric Sketches of Plumbing Installations

Bathroom Layouts
Piping Layouts

Basic AutoCAD Functions
Using AutoCAD to Help Lay-Out Plumbing Installations

Industrial Rigging I & UA Crane Signalperson Certification (Advanced Rigging)
2027-01-06 17:30 - 2027-03-24 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Basic Rigging for the FIELD, Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Rigging for the FIELD, Basic Math Online

Day/Time: Wednesdays starting January 6, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber & J. Buhrow

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed to expand upon the foundational rigging knowledge acquired during the apprenticeship program, with a strong emphasis on advanced safety practices and the strategic movement of large, complex, or irregular loads. As heavy lifting and load handling play a critical role in both modern manufacturing and construction environments, this training ensures participants are well-prepared to plan and execute safe, efficient rigging operations in a variety of real-world scenarios.

Participants will engage with both classroom instruction and practical applications focused on the technical, mathematical, and mechanical considerations of advanced rigging. Emphasis is placed on understanding rigging plans, calculating load weights, using proper lifting angles, and managing non-symmetrical and shifting loads with precision and confidence.

Key Learning Units Include:

Review of Basic Rigging Principles and Terminology
Identification and Management of Non-Symmetrical and Irregular Loads
Chain-Fall Systems and High-Line Applications
Sling Angle Calculations and Their Effect on Load Tension
Determining Total Rigging Load Weights and Center of Gravity
Load Path Planning and Risk Mitigation
Communication and Signal Person Best Practices

This course prepares journey-level workers and advanced apprentices for the increased responsibilities and challenges associated with critical lifts, helping to ensure safe operations on job sites where heavy rigging is required. Students will also take the UA Crane Signalperson Practical and Written Exams as a part of the class.

Blueprint Reading for Plumbers
2027-01-06 17:30 - 2027-03-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting January 6, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

Basic Rigging for the Field (Wednesday)
2027-01-06 17:30 - 2027-03-10 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Wednesdays starting January 6, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Steamfitting Classroom

Instructor: A. Gussert

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with a solid foundation in basic rigging principles, focusing on the safe and effective use of rigging equipment in field applications. Emphasis is placed on hands-on learning, proper safety procedures, and the development of practical skills that can be immediately applied on job sites. Apprentices will gain the knowledge required to identify and utilize appropriate rigging hardware, perform critical safety checks, and effectively communicate during lifting operations.

Through a combination of classroom instruction and real-world scenarios, apprentices will become familiar with industry standards, safety regulations, and best practices related to rigging. The course also reinforces the importance of teamwork, communication, and hazard recognition in ensuring safe and successful lifts.

Learning Units Include:

Rigging Knots & Hitches:
Instruction and hands-on practice with essential knots and hitches commonly used in rigging operations. Apprentices will learn when and how to apply each type for secure and efficient load control.
Rigging Equipment and Hardware Safety:
An overview of basic rigging components such as shackles, slings, hooks, and eye bolts. Apprentices will learn how to inspect rigging hardware for defects, understand load ratings, and ensure compliance with safety standards.
Execute Safe Rigging Scenarios:
Interactive exercises and simulated lifts that require apprentices to plan and execute rigging setups using appropriate gear, configurations, and safety measures. Focus will be on problem-solving, situational awareness, and risk mitigation.
Recognizing and Performing Proper Crane Hand Signals:
Apprentices will learn the standardized crane hand signals used in the field to ensure clear communication between riggers and crane operators. Training includes both recognition and execution of signals in practical exercises.

By the end of the course, apprentices will demonstrate proficiency in basic rigging practices and be prepared to assist safely and effectively in routine lifting operations under supervision.

Advanced Pipe Trades Math (AFTERNOON)
2027-01-07 12:30 - 2027-03-18 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Thursdays starting January 7, 2027 from 12:30 p.m. to 3:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: N. Marshall

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Welding (Thursday)
2027-01-07 17:30 - 2027-03-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate

SMAW – Pipe

GMAW – Flat Plate

GMAW – Pipe

FCAW – Flat Plate

FCAW – Pipe

GTAW – Flat Plate

GTAW – Pipe

Tube Bending (Thursday)
2027-01-07 17:30 - 2027-03-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: The learning units include:

Safety Concerns During the Tube Bending Process
Parts of a Tubing Bender
The Tube Bending Process
Set-Backs as they Relate to any Bend and Lay-Out of Bends
Tube Bending Lay-Out
Common Mistakes Made During the Tube Bending Process
Line-Up and Leveling of Tubing During the Bending Process
Interpreting Isometric Drawings
Wire Templates
Tube Bending Order

Soldering & Brazing (Thursday)
2027-01-07 17:30 - 2027-03-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Solder & Braze Lab

Instructor: N. Johnson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers procedures for cutting, soldering, and brazing of pipe and tubing. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions. The learning units include:

Safety and Safe Work Practices
Soldering & Brazin Processes
Types and Uses of Copper Tubing and Pipe
Solders, Brazing Filler Metals and Fluxes
Joining Preparation and Assembly
Making a Soldered Joint and a Brazed Joint
Performance Testing for Soldered and Brazed Joints
Braze Materials

Relay Logic & PLC's
2027-01-07 17:30 - 2027-03-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 2nd Year of Day School Complete

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: J. Benz & B. Nygaard

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: In this course, the student will learn many of the electrical systems used within a ladder or pictorial wiring diagrams commonly found within HVAC equipment. The Class will continue with a hands-on section with a demo board with be used to review circuits, including testing of circuits. Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out. Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.

Pipe Trades Math for Fitters & Fabricators (Thursday)
2027-01-07 17:30 - 2027-03-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: J. Olson

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course covers math as it relates to our Construction trades. The learning units include:

Right Angle Trigonometry
Lay-Out of a Factory Mitered Fitting
Lay-out of Jump Over Fitting Offsets
Lay-Out of a 90 Degree Elbow on an Off-Degree Fitting
Lay-Out of an Off Degree Rolling Offset
Lay-Out of a Multi-Piece Fitting
Lay-Out of a 45 Degree Lateral Fitting

Pipe Joining Applications (Thursday)
2027-01-07 17:30 - 2027-03-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: M. Karls

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Pro Calculator
ITP Red Book

Course Description: This course provides students with hands-on training and technical knowledge in the most common methods of joining piping systems used throughout the plumbing and pipefitting industry. Emphasis will be placed on safety, industry standards, and proper installation techniques to ensure reliable and efficient piping systems.

Participants will gain practical experience with a variety of joining methods, including:

Safety Practices – Comprehensive review of safe work procedures, tool handling, and hazard awareness.
Carbon Threading Pipe and Fittings – Techniques for threading, cutting, and assembling carbon steel pipe.
Copper Pro-Press Pipe and Fittings – Proper use of press-fitting systems for copper piping installations.
Mega Press Pipe and Fittings – Application of press-fitting technology for carbon steel, stainless steel, and copper nickel piping systems.
Grooved Pipe and Fittings – Assembly methods for grooved couplings and fittings in mechanical piping systems.
Copper Flared Connections – Best practices for creating and inspecting flared connections.
Flanged Piping Connections – Procedures for aligning, bolting, and gasket installation.
Leak Testing Procedures – Safe and effective methods for performing leak checks on completed piping systems.

Upon completion, participants will be able to confidently and safely install piping systems using multiple joining applications, ensuring long-lasting, reliable, and code-compliant installations. They will also be able to adapt to different jobsite requirements by selecting the appropriate joining method for the task.

OSHA 30-Construction Certification (Thursday)
2027-01-07 17:30 - 2027-03-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Meeting Hall

Instructor: M. Ott

Course Materials Needed: N/A

Course Description: This detailed course provides construction professionals with an in-depth understanding of OSHA standards and best practices for maintaining a safe and compliant jobsite. Designed for supervisors, foremen, safety managers, and workers with safety responsibilities, the program emphasizes hazard recognition, risk reduction, and the development of proactive safety and health programs.

Through a combination of instruction, case studies, and practical applications, participants will gain the knowledge and skills needed to identify common jobsite hazards, implement effective controls, and ensure compliance with OSHA regulations.

Learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement, and Safety Management Programs
Fall Protection
Scaffolds
Stairways and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical Safety (NFPA 70E and Lockout/Tagout)
Welding & Cutting
Powered Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, and Barricades
Safety & Health Programs

Upon successful completion, participants will earn the OSHA 30-Hour Construction Safety Certification, demonstrating their competence in construction safety standards and their commitment to creating and maintaining safe workplaces.

Financial Literacy
2027-01-07 17:30 - 2027-03-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, HVAC Service Classroom

Instructor: J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Calculator

Course Description: This class is an instructor-led curriculum designed to equip UA400 members with the essential knowledge and practical skills needed to manage their personal finances confidently and effectively. Through engaging lessons, skill-building activities, and access to valuable resources, participants will learn how to make informed financial decisions and develop healthy money habits.

This course covers a range of financial topics tailored to support everyday needs, including budgeting, saving, understanding credit, managing debt, and planning for the future.

Please note: The instructor is not a financial advisor and will not provide personal financial advice. Instead, the instruction is focused on delivering unbiased, relevant, and accurate financial education to empower members to take control of their financial well-being.

The learning units include:

Advantages of Utilizing Banks
Basics of Banking
Track you Spending
Setting Goals
Implementing a Budget
Debt Management
Understanding Credit
Being a Smart Consumer
Being Prepared for the Unknown
Protecting you Identity and Other Assets
Retirement Planning
Disasters – Financial Preparation and Recovery

Blueprint Reading for Steamfitters (Thursday)
2027-01-07 17:30 - 2027-03-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 10 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: F. Ujazdowski

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Mechanical Pencil
Straight Edge
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course will focus on understanding the basic of plan interpretations. The main focus will be on the understanding the basics of a plan and elevation drawings. The learning units include:

Interpreting Different Drawings

Architectural Drawings
Structural Drawings
Mechanical Drawings

Reviewing Shop Drawings
Identifying Common Problems with Drawings
Introduction to Coordinated Drawings
Introduction to Building Information Modeling (BIM)

4th Year Steamfitter (Construction) Related (Thursday)
2027-01-07 17:30 - 2027-03-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting January 7, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: J. Smet/B.Eick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course reviews years one through four of the Steamfitter-Construction Apprenticeship. It is used as preparation for the Apprentice’s final written journeyman testing. The learning units include review of:

Pipe Math
Science
Refrigeration
Steam, including steam tables
Hydronics

VitalCog (Mental Health Awareness)
2027-02-01 16:00 - 19:00 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Monday, February 1, 2027 from 4:00 p.m. to 7:00 p.m.

Location: Kaukauna Training Center, Meeting Hall

Instructor: F. Ujazdowski & J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include: students will develop an understanding of the value, fundamentals and practices of peer support skills. Students will be able to demonstrate a basic knowledge of mental health literacy, find shared meaningful experiences with peers, express empathy through reflections and demonstrate active listening skills. Students will also be able to assist in connecting people who are struggling to specialty professional services such as crisis counseling and addiction recovery services.

First Aid/CPR/AED Certification (February-Monday)
2027-02-01 17:30 - 2027-02-15 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting February 1, 2027 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (February-Tuesday)
2027-02-02 17:30 - 2027-02-16 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays starting February 2, 2027 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

First Aid/CPR/AED Certification (February-Thursday)
2027-02-04 17:30 - 2027-02-18 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Thursdays starting February 4, 2027 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: J. Larsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Use & Care of Tools - ONLINE
2027-03-01 - 2027-05-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 1st through May 16th

Location: Online, N/A

Instructor: K. Bentle

Course Materials Needed:

Use & Care of Tools Book (Metal Trades Members owe a $35 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course provides online instruction in the proper use, care, and safety considerations for hand tools, power tools, and related equipment. Participants will gain valuable knowledge through demonstrations, examples, and guided discussion. Emphasis is placed on building awareness of correct procedures to improve efficiency, accuracy, and workplace safety.

Key topics include:

Proper Tool Use and Applications
Tool Care & Preventative Maintenance
Safety Protocols and Best Practices
Ladders & Scaffolding Safety Guidelines
Measurement and Layout Tools Overview
Hand and Power Tools: Functions & Safe Operation
Local 400 Shop Equipment: Use & Maintenance Guidelines

This course is designed to strengthen foundational knowledge, reinforce safe practices, and prepare participants to apply these principles effectively on the job.

Union 101: UA & Labor History - ONLINE
2027-03-01 - 2027-05-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 1st through May 16th

Location: Online, N/A

Instructor: K. Bentle

Course Materials Needed:

Standard of Excellence Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)
Survival of the Fittest Book (Metal Trades Members owe a $20 deposit, the deposit is returned to the Member upon the book being returned in good condition)

Course Description: This course introduces participants to the foundations of union membership, labor history, and the values that guide the United Association (UA). Students will gain a deeper understanding of the role unions play in protecting workers’ rights, advancing standards in the trades, and shaping the modern workplace.

Key topics include:

The UA Standard for Excellence and its impact on members, contractors, and the industry
Survival of the Fittest by Mark Breslin: strategies for leadership, accountability, and success in the trades
Major events in U.S. labor history and the growth of the labor movement
Landmark labor laws and their continuing influence on workers’ rights
The history and evolution of the UA and Local 400
The responsibilities and benefits of union membership

Emphasis is placed on connecting historical lessons and union principles with today’s workplace realities. This course prepares participants to uphold union values, strengthen solidarity, and contribute to the long-term success of the UA and its members.

Upon course availability, enrolled students will receive an email with access details for Canvas, the online course management system. As a self-paced program, enrollment is open throughout the semester, allowing participants to join at their convenience.

Failure to complete the class in its entirety before the deadline will result in no credit for the class and having to start the class entirely over.

Basic Math - ONLINE
2027-03-01 - 2027-05-16
Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 01, 2027 to May 16th, 2027

Location: Online, N/A

Instructor: K.Bentle

Course Materials Needed:

Practical Math Book (Metal Trades Members owe a $60 deposit, the deposit is returned to the Member upon the book being returned in good condition)Course Description: This course is designed to strengthen foundational math skills essential for both academic and everyday use. Through a structured and practical approach, students will develop confidence and competence in essential mathematical concepts. Learning units include Whole Numbers, Simple & Complex Fractions, Decimals, Percentages, Exponents, Ratios, Proportions, and an introduction to Plane & Solid Figures. The course emphasizes problem-solving, critical thinking, and real-world applications to prepare students for further math courses or workforce readiness.There is a Test Out option for this class; if you achieve a 90% or better on the Test Out, you are not required to fulfill the remaining assignments/exam in the class.You will receive an email when the class is open and ready for you to complete with the link to the online course management system, Canvas.

Due to this being a self-paced course, you can enroll in this course mid-semester.

Not completing the class in its entirety prior to the deadline will result in you not receiving credit for the class and having to start the class entirely over.

Basic Computers(Online)
2027-03-01 - 2027-05-16
Pre-Requisite:

Metal Trades: "Metal Trades 101: Metal Trades Advancement ONLINE"
Apprentices, MEST's, Training Agreement Trainee's, Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 01, 2027 to May 16, 2027

Location: Online, N/A

Instructor: T. Adams and A. Thompson

Course Materials Needed:

Reliable computer with Microsoft Word, Excell, and PowerPoint capabilities.

The Microsoft programs can be apps or web based.

Course Description: This course is designed to provide students with a strong foundation in computer and Microsoft Office skills, preparing them for more advanced study in technology and virtual design. Ideal for beginners, this class covers the essential knowledge needed to navigate today’s digital world with confidence.

Topics Covered:

Computer Basics: Understand computer components, basic operations, and maintenance.
Windows Basics: Learn to navigate the Windows operating system, manage files and folders, and customize settings.
Internet Basics: Explore safe web browsing, search techniques, and website evaluation.
Email Basics: Set up and manage an email account, send and receive messages, attach files, and practice good email etiquette.
Microsoft Word 2016: Create, edit, and format documents, using Word’s tools to produce professional documents.
Microsoft Excel 2016: Learn spreadsheet basics, work with formulas, create charts, and organize data effectively.
Microsoft PowerPoint 2016: Design and deliver engaging presentations with slides, images, transitions, and animations.
All curriculum for this course is sourced from GCF Global. For more detailed lessons, tutorials, and additional resources, please visit their website: https://edu.gcfglobal.org/en/.This course is designed to give learners a strong, practical understanding of computers and Microsoft software. It also serves as a prerequisite for UA400 Virtual Design and Construction (VDC) classes.

MT 101-Metal Trades Advancement(Online)
2027-03-01 - 2027-05-16
Pre-Requisite:

None
Youth Apprentices: N/A

Day/Time: Online, Self Paced, starting March 01, 2026 to May 16, 2027

Location: Online, N/A

Instructor: S. Krejcarek and A. Thompson

Course Materials Needed: None

Course Description: Metal Trades 101 is designed for Local 400 Metal Trades members looking to advance their skills and knowledge as metal trades workers. This course will provide an in-depth understanding of the different levels within the metal trades classification, the Collective Bargaining Agreement (CBA), and the valuable union benefits available to members. Participants will gain insights into career progression, workplace rights, and the opportunities that come with union membership. Whether you're new to the trade or preparing for the next step in your career, this class will equip you with the essential knowledge to succeed in the industry.

Welding (APRIL - Monday AND Wednesday)
2027-04-05 17:30 - 2027-05-05 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Monday AND Wednesday starting April 5, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Service Solder, Braze & Weld (APRIL - Monday AND Wednesday)
2027-04-05 17:30 - 2027-05-05 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting April 5, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop & Solder & Braze Lab

Instructor: B. Schampers & T. Wunder

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to setup the welding machine to make simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems.

Please note: this class will not teach the apprentice how to weld pipe.

The learning units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper Operation of Torch and Welding Equipment

First Aid/CPR/AED Certification
2027-04-05 17:30 - 2027-04-19 21:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Mondays starting April 5, 2027 from 5:30 p.m. to 9:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: B. Elliott

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This certification course provides participants with the critical knowledge and practical skills required to respond effectively in medical emergencies. Through a combination of instruction and hands-on training, learners will gain confidence in recognizing signs of distress, delivering immediate care, and properly using an Automated External Defibrillator (AED) during cardiac arrest events. The program also emphasizes the management of sudden illnesses, traumatic injuries, choking incidents, and environmental emergencies. Successful completion of the course results in First Aid and Basic Life Support certification through COYNE.

Key Topics Include:

Initial Assessment of Injured or Ill Individuals
Response to Cardiac and Breathing Emergencies
Choking Management and Airway Support
Recognition and Care of Sudden Illnesses
Treatment of Traumatic Injuries
Response to Environmental Injuries and Illnesses

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

Plumber Apprentices are required to have a VALID (non-expired) First Aid/CPR/AED Certification to be eligible to sign up for their State Exam; you'll need to maintain your certification throughout your Apprenticeship. If you do not maintain your certification, you'll be required to re-take the entire course again.

Welding (APRIL - Tuesday AND Thursday)
2027-04-06 17:30 - 2027-05-06 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Tuesday AND Thursday starting April 6, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Service Pipe Math & Tube Bending
2027-04-06 17:30 - 2027-04-29 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 6, 2027 from 5:30 p.m. to 8:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Tube Bending Lab

Instructor: M. Darnick

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The learning units include:

45 Degree Pipe Math
45 Degree Offsets
Tube Bending Layout
Tube Bending Math

Pipe Joining Applications (Tuesday AND Thursday)
2027-04-06 17:30 - 2027-05-06 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete
Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 6, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, 2nd Floor Pipefitting Lab

Instructor: T. Hoffman

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Pro Calculator
ITP Red Book

Course Description: This course provides students with hands-on training and technical knowledge in the most common methods of joining piping systems used throughout the plumbing and pipefitting industry. Emphasis will be placed on safety, industry standards, and proper installation techniques to ensure reliable and efficient piping systems.

Participants will gain practical experience with a variety of joining methods, including:

Safety Practices – Comprehensive review of safe work procedures, tool handling, and hazard awareness.
Carbon Threading Pipe and Fittings – Techniques for threading, cutting, and assembling carbon steel pipe.
Copper Pro-Press Pipe and Fittings – Proper use of press-fitting systems for copper piping installations.
Mega Press Pipe and Fittings – Application of press-fitting technology for carbon steel, stainless steel, and copper nickel piping systems.
Grooved Pipe and Fittings – Assembly methods for grooved couplings and fittings in mechanical piping systems.
Copper Flared Connections – Best practices for creating and inspecting flared connections.
Flanged Piping Connections – Procedures for aligning, bolting, and gasket installation.
Leak Testing Procedures – Safe and effective methods for performing leak checks on completed piping systems.

Upon completion, participants will be able to confidently and safely install piping systems using multiple joining applications, ensuring long-lasting, reliable, and code-compliant installations. They will also be able to adapt to different jobsite requirements by selecting the appropriate joining method for the task.

Basic Rigging for the FIELD (Tuesday AND Thursday)
2027-04-06 17:30 - 2027-05-06 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

Steamfitter and Fabricator Apprentices: Pipe Trades Math, Basic Math Online
HVAC Service & Plumber Apprentices: Basic Math Online

Day/Time: Tuesdays AND Thursdays starting April 6, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: M. Bice

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description:
This course is designed to provide apprentices with a solid foundation in basic rigging principles, focusing on the safe and effective use of rigging equipment in field applications. Emphasis is placed on hands-on learning, proper safety procedures, and the development of practical skills that can be immediately applied on job sites. Apprentices will gain the knowledge required to identify and utilize appropriate rigging hardware, perform critical safety checks, and effectively communicate during lifting operations.

Through a combination of classroom instruction and real-world scenarios, apprentices will become familiar with industry standards, safety regulations, and best practices related to rigging. The course also reinforces the importance of teamwork, communication, and hazard recognition in ensuring safe and successful lifts.

Learning Units Include:

Rigging Knots & Hitches:
Instruction and hands-on practice with essential knots and hitches commonly used in rigging operations. Apprentices will learn when and how to apply each type for secure and efficient load control.
Rigging Equipment and Hardware Safety:
An overview of basic rigging components such as shackles, slings, hooks, and eye bolts. Apprentices will learn how to inspect rigging hardware for defects, understand load ratings, and ensure compliance with safety standards.
Execute Safe Rigging Scenarios:
Interactive exercises and simulated lifts that require apprentices to plan and execute rigging setups using appropriate gear, configurations, and safety measures. Focus will be on problem-solving, situational awareness, and risk mitigation.
Recognizing and Performing Proper Crane Hand Signals:
Apprentices will learn the standardized crane hand signals used in the field to ensure clear communication between riggers and crane operators. Training includes both recognition and execution of signals in practical exercises.

By the end of the course, apprentices will demonstrate proficiency in basic rigging practices and be prepared to assist safely and effectively in routine lifting operations under supervision.

Basic Burners & Boilers (Tuesday AND Thursday)
2027-04-06 17:30 - 2027-05-06 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Tuesdays AND Thursdays starting April 6, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, HVAC Service Lab

Instructor: E. Beulen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course focuses on the major components of boilers and how boilers operate to produce steam, heat and electricity. Students will also learn the theory behind the design, application, and safe operation of gas-fired burner equipment. The learning units include:

Boiler Types and Design
Process Controls
System Operations
Troubleshooting
Basic Burner Maintenance and Basic Burner Tune-Up
Water Chemistry

Backflow/Cross Connection Control Tester Certification
2027-04-06 17:30 - 2027-05-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Certification to Standard 5110 for Backflow Prevention Assembly Testers is available only to individuals who have a minimum of five (5) years experience in the installation or service of plumbing, mechanical, fire sprinkler, lawn irrigation or a related industry field using potable water, or 4th or 5th year apprentices from a recognized apprenticeship program. An apprentice who has not yet reached 4th year status must provide written verification of detailed plumbing/piping experience in advance of the 40-hours of instruction. Certification shall consist of a minimum of forty (40) hours of instruction and exams.

Day/Time: Tuesdays AND Thursdays starting April 6, 2027 from 5:30 p.m. to 8:30 p.m. for 6 ½ weeks

Location: Kaukauna Training Center, Plumbing Classroom

Instructor: C. Cappaert & J. VandeHey

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course is designed for plumbers and other related mechanical contractors. The course covers basic backflow hydraulics, cross-connection identification, degree of hazard, operation of backflow prevention assemblies, applications and basic installation requirements of backflow prevention assemblies. A hands-on workshop will allow students to practice test procedures on the reduced pressure principal assembly, double check valve assembly, and pressure vacuum breaker. ASSE certification in backflow prevention assembly testing, repairing, and surveying adds nationally recognized credentials to your resume, enhances your skills, and increases the number of tasks you can perform – ultimately raising your employability.

Advanced Pipe Trades Math (Tuesday AND Thursday)
2027-04-06 17:30 - 2027-05-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite:

ALL Apprentices: 2nd Year of Day School Complete and Pipe Trades Math for Steamfitters and Fabricators, Basic Math

Day/Time: Tuesdays and Thursdays starting April 6, 2027 from 5:30 p.m. to 8:30 p.m. for 5.5 weeks

Location: Kaukauna Training Center, Steamfitter Classroom

Instructor: B. Meyerhofer

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Cards

Course Description: This course builds upon the Basic Pipe Math skills learned throughout your apprenticeship. The lateral and cut fitting projects at the end of this course are part of your Final Practical Testing. The learning units include:

Carbon Steel Welding (SMAW Weld Process)
Stainless Steel Welding (GTAW Weld Process)
45 Degree Lateral Project
Mitered Fitting Project

Welding (Monday AND Wednesday AFTERNOON)
2027-04-07 12:30 - 2027-05-07 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays and Wednesdays starting April 5, 2027 from 12:30 p.m. to 3:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

UA Heritage
2027-04-07 17:30 - 2027-06-11 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Union 101: UA & Labor History Online

Day/Time: Wednesdays starting April 7, 2027 from 5:30 p.m. to 8:30 p.m. for 11 weeks

Location: Kaukauna Training Center, Meeting Hall

Instructor: L. LaPierrere/J. Schmechel

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: This course will focus on the history of the United Association and how the lessons of the past can make the UA stronger. The student will also learn how Local 400 operates on a day-to-day basis, and the relationship between contractors that are signatory to Local 400 and the UA. The learning units include:

UA Standards of Excellence
UA Constitution
UA 400 By-Laws
UA 400 Collective Bargaining Agreement
UA 400 Health & Welfare
UA 400 Pension Funds
The Cost of an Hour of Labor

Industrial Rigging II & EPRI Industrial Rigger Certification
2027-04-07 17:30 - 2027-05-12 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Industrial Rigging I, Basic Rigging for the FIELD, Pipe Trades Math for Steamfitters and Fabricators, Basic Math Online

Day/Time: Wednesdays starting April 7, 2027 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Fabricator Classroom

Instructor: S. Stauber

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Red ITP Crane Book
Pipefitting Cards

Course Description: The United Association Industrial Rigging Certification Program provides 60 to 80 hours of comprehensive training, with a minimum of 35% dedicated to hands-on practical exercises. Participants will utilize the Industrial Rigging Training Manual and IPT’s Crane and Rigging Handbook, both available through the IPT Bookstore.

Rigging work demands sound judgment built on a foundation of experience and formal training. Once the weight of a load is determined, the rigger must plan and execute its movement safely and efficiently—whether the task is straightforward or highly complex. This requires careful selection and application of appropriate rigging equipment, crane operations, signaling, cribbing, and support systems.

The goal of this program is to produce highly skilled and certified industrial riggers who meet the highest standards of safety, quality, and workmanship. Through this course, participants will gain in-depth knowledge and practical skills in:

Rigging Math

Formulas
Load Calculations
Sling Stress
Coefficients of Friction

Crane Dynamics and Operation
Crane Signaling
Sling Angles and Stress
Load Transfer and Center of Gravity
Load Inversions
Multi-Point Lifts
Lift Plan Development and Execution

Upon completion, participants will be prepared to perform rigging tasks with confidence, precision, and adherence to industry best practices.

Transit, Level & Laser
2027-04-28 17:30 - 2027-06-02 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Wednesdays starting April 28, 2027 from 5:30 p.m. to 8:30 p.m. for 6 weeks

Location: Kaukauna Training Center, Blueprint Reading Classroom

Instructor: J. Everard/M. Ellison

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator

Course Description: This course is designed to expose the Apprentice to the operation, function, and proper use of a transit-level. The learning units include:

Setting Up the Transit
Reading Elevations
Interpreting Benchmarks at Sea Level, 0.0’, or 100.0’
Transferring Benchmark Levels Requiring Multiple Transit Setups
Plumbing Over a Point

OSHA 30-Construction Certification (4-ALL DAY FRIDAYS)
2027-04-30 07:30 - 2027-05-21 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Fridays starting April 30, 2027 from 7:30 a.m. to 3:30 p.m. for 4 weeks

Location: Kaukauna Training Center, Safety Classroom

Instructor: TBD

Course Materials Needed: N/A

Course Description: This detailed course provides construction professionals with an in-depth understanding of OSHA standards and best practices for maintaining a safe and compliant jobsite. Designed for supervisors, foremen, safety managers, and workers with safety responsibilities, the program emphasizes hazard recognition, risk reduction, and the development of proactive safety and health programs.

Through a combination of instruction, case studies, and practical applications, participants will gain the knowledge and skills needed to identify common jobsite hazards, implement effective controls, and ensure compliance with OSHA regulations.

Learning units include:

Managing Safety & Health
Occupational Health Hazards
Safety Meetings, Employee Involvement, and Safety Management Programs
Fall Protection
Scaffolds
Stairways and Ladders
Excavations
Fire Protection and Prevention
Confined Spaces
Respiratory Protection
Electrical Safety (NFPA 70E and Lockout/Tagout)
Welding & Cutting
Powered Industrial Trucks (Forklifts)
Aerial Lifts
Material Handling, Storage, Use & Disposal
Crane Hazards
Hand & Power Tools
Signs, Signals, and Barricades
Safety & Health Programs

Upon successful completion, participants will earn the OSHA 30-Hour Construction Safety Certification, demonstrating their competence in construction safety standards and their commitment to creating and maintaining safe workplaces.

This is a required class within 1 Year of Indenture Date for Apprentices to be eligible for Year 2 wage raise.

VitalCog (Mental Health Awareness)
2027-05-03 16:00 - 19:00 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: N/A

Day/Time: Monday, May 3, 2027 from 4:00 p.m. to 7:00 p.m.

Location: Kaukauna Training Center, Meeting Hall

Instructor: F. Ujazdowski & N. Johnsen

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)

Course Description: The learning units include: students will develop an understanding of the value, fundamentals and practices of peer support skills. Students will be able to demonstrate a basic knowledge of mental health literacy, find shared meaningful experiences with peers, express empathy through reflections and demonstrate active listening skills. Students will also be able to assist in connecting people who are struggling to specialty professional services such as crisis counseling and addiction recovery services.

Transition to Trainer
2027-05-04 17:30 - 2027-05-18 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Tuesdays starting May 4, 2027 from 5:30 p.m. to 8:30 p.m. for 3 weeks

Location: Kaukauna Training Center, Meeting Hall

Instructor: C. Markowski & N. Johnsen

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This state-required course in Wisconsin equips journey workers with the essential skills to become effective job site trainers, role models, and mentors. Since most apprenticeship learning happens through daily interactions with experienced professionals, this course empowers journey workers to actively enhance apprenticeship training and contribute to their trade.

Through this training, you will gain practical tools to:

Transition from worker to trainer
Provide effective orientation and mentorship
Foster a positive and productive work environment
Plan and deliver hands-on skill training
Give constructive feedback on job performance

Welding (MAY - Monday AND Wednesday)
2027-05-17 17:30 - 2027-06-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Monday AND Wednesday starting May 17, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop

Instructor: Various, TBD

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Welding Helmet, Gloves and Jacket

Course Description: This course teaches pipe welding techniques used in such applications as welding high alloy materials and process piping. Learning will be at the member’s own pace, but will be structured so the member masters each process before moving on to the next process. This will take several classes to complete. The learning units include:

SMAW – Flat Plate
SMAW – Pipe
GMAW – Flat Plate
GMAW – Pipe
FCAW – Flat Plate
FCAW – Pipe
GTAW – Flat Plate
GTAW – Pipe

Service Solder, Braze & Welding (MAY - Monday AND Wednesday)
2027-05-17 17:30 - 2027-06-16 20:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: Use & Care of Tools Online

Day/Time: Mondays AND Wednesdays starting May 17, 2027 from 5:30 p.m. to 8:30 p.m. for 5 weeks

Location: Kaukauna Training Center, Weld Shop & Solder & Braze Lab

Instructor: B. Schampers & T. Wunder

Course Materials Needed:

Proper PPE (Steel-Toed Shoes/Boots, Long Pants, Safety Glasses, Gloves, etc.)
Pipe Trades Calculator
Red ITP Book
Pipefitting Bending Cards

Course Description: The first part of this course covers proper procedures for cutting, soldering and brazing of pipe and tubing. The final part of this course, the apprentice will learn the basics of welding from learning how to setup the welding machine to make simple welds. Upon completion, students should be able to solder and braze pipe, tubing, and fittings in various positions, as well as being able to weld brackets and other structural items necessary for the installation of piping systems.

Please note: this class will not teach the apprentice how to weld pipe.

The learning units include:

Safety
Proper Equipment Set-Up
Proper Purging Techniques
Proper Operation of Torch and Welding Equipment

Transition to Trainer (1-ALL DAY FRIDAY)
2027-05-21 07:30 - 15:30 | Local 400 Training Center, 2700 Northridge Drive, Kaukauna, WI, 54130, United States
Pre-Requisite: 4th or 5th Year Apprentice

Day/Time: Friday, May 21, 2027 from 7:30 a.m. to 3:30 p.m.

Location: Kaukauna Training Center, Meeting Hall

Instructor: C. Markowski & N. Johnsen

Course Materials Needed:

Apprentice Packet
Toolkit
Participation & Survey Forms

Course Description: This state-required course in Wisconsin equips journey workers with the essential skills to become effective job site trainers, role models, and mentors. Since most apprenticeship learning happens through daily interactions with experienced professionals, this course empowers journey workers to actively enhance apprenticeship training and contribute to their trade.

Through this training, you will gain practical tools to:

Transition from worker to trainer
Provide effective orientation and mentorship
Foster a positive and productive work environment
Plan and deliver hands-on skill training
Give constructive feedback on job performance
